search

Koenkk / zigbee2mqtt

Zigbee 🐝 to MQTT bridge 🌉, get rid of your proprietary Zigbee bridges 🔨
https://www.zigbee2mqtt.io
GNU General Public License v3.0
12.08k stars 1.68k forks source link

TRVZB Firmware 1.1.5 --> Better-thermostat broken #23388

Open Unclezz opened 3 months ago

Unclezz commented 3 months ago

What happened?

Apparently firmware 1.1.5 makes Better-Thermostat custom add-on from HACS unusable.

Everytime you try to set temperature or anything else from HA to the TRV, the TRV goes into OF mode (from the display on the valve itself.

What did you expect to happen?

Simply able to use the valve leveraging Better-thermostat

How to reproduce it (minimal and precise)

Add the TRV in Better-Thermostat as new device; add a Better-Thermostat sensor card to control the TRV and try to change whatever value (from temperature setting to heting off or anything else; check status on the TRV and notice it is now set to OF.

Zigbee2MQTT version

1.39.0

Adapter firmware version

20240710.0

Adapter

EZSP V8 Tasmota 13.2.0

Setup

HA on Qemu VM

Debug log

No response

DavyRoswinkel commented 2 months ago

I have exact the same Issue here. Just installed the device

interru commented 1 month ago

Wasn't a problem on my side. I assume that you missed the "outdoor temperature threshold". If the outside temperature is over that threshold, the devices are reset to off by better-thermostat regardless if you manually set a temperature.

I'm not using better-thermostat currently because the local_temperature_calibration is weird and after looking at the calculations that better-thermostat does I decided to rather do most of the automations myself.

ignisf commented 2 days ago

I also cannot reproduce the issue.