Open tomer-w opened 2 months ago
I'm facing strange issue too since I upgraded my USB coordinator (CC2652RB as well with an old 20210120 firmware) I updated the firmware to 20240710 and since then, only one device is reporting values to the coordinator. When I look at the map, devices are not connected to the coordinator... (I noticed just once the responding device with a 0 lqi link, just like your screenshot but when I refreshed the map, the link disappeared) I tried downgrade of the Coordinator firmware with the following versions without success (they are available on GitHub, on different tags)
What happened?
After upgrading my Slaesh's CC2652RB stick coordinator FW from the original one I got with the stick (I lost that FW during the upgrade, but it was from 2001) to 20240710, LQI data on the network map for all end devices (not routers) connected directly to my coordinator became zero. I don't have a single device that shows non-zero LQI, which cannot be the case. Other LQI data in the network map coming from routers looks good. In the dashboard tab or state page for specific devices, I do have the right LQI data. I looked over the MQTT messages and indeed the LQI is zero for the networkmap reply. I tried to capture raw Zigbee messages with Wireshark and while I could do that, I could not find what LQI value is reported and how it is correlated to what I see on the network map.
What did you expect to happen?
I expected none-zero LQI data in the network map for devices connected to my coordinator.
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
1.40.0
Adapter firmware version
20240710
Adapter
Slaesh's CC2652RB stick
Setup
Add-on on Home Assistant OS on RPI 4B
Debug log
No response