NOUS E6 Temp/Humidity detector

[fdecourt]

What happened?

When paring the device, it is not properly recognize (TS0601) instead of Nous E6. I have 19 devices working perfectly, except this one

What did you expect to happen?

To be recognize properly

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.38.0

Adapter firmware version

7.4.2 [GA]

Adapter

SONOFF ZigBee 3.0 USB Dongle Plus

Setup

LXC Container on a Proxmox device

Debug log

info 2024-09-29 20:50:41Successfully interviewed '0xa4c138ff41af7a1b', device has successfully been paired warning 2024-09-29 20:50:41Device '0xa4c138ff41af7a1b' with Zigbee model 'TS0601' and manufacturer name '_TZE284_wtikaxzs' is NOT supported, please follow https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html info 2024-09-29 20:50:41MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"definition":null,"friendly_name":"0xa4c138ff41af7a1b","ieee_address":"0xa4c138ff41af7a1b","status":"successful","supported":null},"type":"device_interview"}' info 2024-09-29 20:50:50MQTT publish: topic 'zigbee2mqtt/0xa4c138ff41af7a1b', payload '{"last_seen":"2024-09-29T20:50:50+02:00","linkquality":96}'

[fdecourt]

I also tried with the latest Z2MQTT version, v1.40.1, unsuccessfully

[fdecourt]

OK, I put this issue in the wrong place. Here a solution for users with the same problem (thanks @pmarki) : https://github.com/Koenkk/zigbee-herdsman-converters/issues/8023