bht_002 MQTT zhc:legacy:tz:moes_bht_002: Existing program state not set.

Koenkk / zigbee2mqtt

Zigbee 🐝 to MQTT bridge 🌉, get rid of your proprietary Zigbee bridges 🔨

https://www.zigbee2mqtt.io

GNU General Public License v3.0

12.16k stars 1.68k forks source link

bht_002 MQTT zhc:legacy:tz:moes_bht_002: Existing program state not set. #24482

Open dudeden opened 3 weeks ago

dudeden commented 3 weeks ago

What happened?

When setting the schedule in Z2M on my thermostat I get the error zhc:legacy:tz:moes_bht_002: Existing program state not set. Specifying the schedule parameters either through manual input or through the selection buttons does not give a result.

What did you expect to happen?

Saving entered values

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.40.2

Adapter firmware version

20240710

Adapter

CC2652P

Setup

HomeAssistant

Debug log

No response

achim-70 commented 2 weeks ago

I have the same problem. Also currently on version 1.40.2 but I can't confirm that the problem only exists since this version as I didn't change these settings since more than a year.

dudeden commented 2 weeks ago

Solution. Add a thermostat via TUYA zigbee gateway. Set a schedule via the TUYA application. After that, return the thermostat back to Z2M. Now changing the schedule via Z2M works. This seems to be a solution, but it would be great if it could be done without this "initialization via gateway"

istroganov commented 1 week ago

Have some problem and havn't TUYA zigbee gateway :(