[Wrong device]: GIRIER JR-ZPM03 smart plug

[sehraf]

Link

https://a.aliexpress.com/_Eur8WjX

Model

JR-ZPM03

Description

smart plug with power metering

Vendor

GIRIER

Picture (link)

https://ae-pic-a1.aliexpress-media.com/kf/S16d4fe526eca4d31b50253f356aed674I.jpg_640x640.jpg_.webp

Database entry

{"id":31,"type":"Router","ieeeAddr":"0x70b3d52b600fca15","nwkAddr":1491,"manufId":4660,"manufName":"_TZ3000_okaz9tjs","powerSource":"Mains (single phase)","modelId":"TS011F","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":81,"inClusterList":[0,6,3,4,5,57345,2820,1794],"outClusterList":[25],"clusters":{"genBasic":{"attributes":{"modelId":"TS011F","manufacturerName":"_TZ3000_okaz9tjs","powerSource":1,"zclVersion":2,"appVersion":100,"stackVersion":1,"hwVersion":2,"dateCode":"20210625","swBuildId":"500+TZSKT31BS102"}},"haElectricalMeasurement":{"attributes":{"acCurrentDivisor":1000,"acCurrentMultiplier":1,"rmsVoltage":232,"rmsCurrent":0,"activePower":0}},"seMetering":{"attributes":{"divisor":100,"multiplier":1,"currentSummDelivered":0}},"genOnOff":{"attributes":{"onOff":1}},"manuSpecificTuya_3":{"attributes":{"powerOnBehavior":2}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0014bde8e8","endpointID":1}],"configuredReportings":[{"cluster":6,"attrId":0,"minRepIntval":0,"maxRepIntval":300,"repChange":0}],"meta":{}}},"appVersion":100,"stackVersion":1,"hwVersion":2,"dateCode":"20210625","swBuildId":"500+TZSKT31BS102","zclVersion":2,"interviewCompleted":true,"meta":{"configured":332242049,"reporting":1},"lastSeen":1731315378807}

Notes

The device is detected as BSD29_1 and seem to have a troublesome history:

• https://github.com/Koenkk/zigbee2mqtt/issues/23818
• https://github.com/Koenkk/zigbee2mqtt/issues/18642
• https://github.com/Koenkk/zigbee2mqtt/issues/18151
• https://github.com/Koenkk/zigbee2mqtt/issues/17319

While the device does work as BSD29_1, I think it is still wrong:

• The are no options for calibration (which BSD29_1 should have).
• [minor] The image is very different.
• TS011F_plug_3 was mentioned as the correct mode, but this one is also supposed to have calibration options.
• The device is listed under OTA, but does not respond to any requests (see https://github.com/Koenkk/zigbee2mqtt/issues/18151), firmware version on my two plugs is 500+TZSKT31BS102
• The model JR-ZPM03 does not appear under supported devices
• The vendor GIRIER does not have any smart plug under supported devices
• The packaging calls the model JR-ZMP03 vs JR-ZPM03 what is printed on the device, lol

Since the device works, I'd at least see the model listed as a supported device :)

Here are some images:

[neovinter]

I have same issue with that socket