Nerivec
commented
5 hours ago I've seen a few reports of this recently, seems to be stress-related, a dropped-packet issue, still investigating though... Can you try updating to 8.0.2 and see if the issue is still present for you? (You can revert back to 7.4.4 later if you prefer.)
What happened?
When I try to update a device via OTA updates. My adapter, after a certain time, crashes and reboots.
What did you expect to happen?
I would like to succeed in updating my devices. But impossible always this bug before the end.
How to reproduce it (minimal and precise)
I launch the update from the OTA Update tab on a connected socket TS011F_plug_1 or IKEA LED2201G8 or LED2103G5 or E2206. Still the same problem. It does not always happen at the same update percentage level.
Zigbee2MQTT version
1.42.0
Adapter firmware version
7.4.4 [GA]
Adapter
EmberZNet (Sonoff Zigbee Dongle plus)
Setup
Add on on Home Assitant OS on Virtual machine on Open Media Vault on N100 Computeur
Debug log
error 2024-12-01 22:06:06zh:ember:uart:ash: Received ERROR from adapter, with code=ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT. error 2024-12-01 22:06:06zh:ember:uart:ash: ASH disconnected | Adapter status: ASH_NCP_FATAL_ERROR error 2024-12-01 22:06:06zh:ember:uart:ash: Error while parsing received frame, status=ASH_NCP_FATAL_ERROR. error 2024-12-01 22:06:06zh:ember: Adapter fatal error: HOST_FATAL_ERROR info 2024-12-01 22:06:06zh:ember:uart:ash: ASH COUNTERS since last clear: info 2024-12-01 22:06:06zh:ember:uart:ash: Total frames: RX=3461, TX=4449 info 2024-12-01 22:06:06zh:ember:uart:ash: Cancelled : RX=0, TX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: DATA frames : RX=3447, TX=986 info 2024-12-01 22:06:06zh:ember:uart:ash: DATA bytes : RX=82131, TX=56911 info 2024-12-01 22:06:06zh:ember:uart:ash: Retry frames: RX=13, TX=3 info 2024-12-01 22:06:06zh:ember:uart:ash: ACK frames : RX=0, TX=3460 info 2024-12-01 22:06:06zh:ember:uart:ash: NAK frames : RX=0, TX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: nRdy frames : RX=0, TX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: CRC errors : RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: Comm errors : RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: Length < minimum: RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: Length > maximum: RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: Bad controls : RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: Bad lengths : RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: Bad ACK numbers : RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: Out of buffers : RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: Retry dupes : RX=13 info 2024-12-01 22:06:06zh:ember:uart:ash: Out of sequence : RX=0 info 2024-12-01 22:06:06zh:ember:uart:ash: ACK timeouts : RX=3 error 2024-12-01 22:06:15zh:ember:ezsp: ERROR Transaction failure; status=ASH_ERROR_TIMEOUTS. Last Frame: [FRAME: ID=52:"SEND_UNICAST" Seq=203 Len=7]. error 2024-12-01 22:06:15zh:ember:ezsp: ERROR Transaction failure; status=ASH_NCP_FATAL_ERROR. Last Frame: [FRAME: ID=52:"SEND_UNICAST" Seq=203 Len=7]. info 2024-12-01 22:06:36zh:ember:uart:ash: Port closed. info 2024-12-01 22:06:36zh:ember:uart:ash: ======== ASH stopped ======== info 2024-12-01 22:06:36zh:ember:ezsp: ======== EZSP stopped ======== info 2024-12-01 22:06:36zh:ember: ======== Ember Adapter Stopped ======== error 2024-12-01 22:06:37z2m: Adapter disconnected, stopping