Closed kitopopo closed 4 years ago
Im not aware of a new version, do they work correctly with the original gateway?
Did you change the sensitivity setting on your old sensor to medium
or high
? Just saying because one of the new ones mentions "sensitivity":"low"
and I found that it takes a herd of stampeding elephants to make the detector register anything at that settings.
Did you change the sensitivity setting on your old sensor to
medium
orhigh
? Just saying because one of the new ones mentions"sensitivity":"low"
and I found that it takes a herd of stampeding elephants to make the detector register anything at that settings.
Hi, I did some tests to adjust my awnings, but the problem occurs exactly the same in the other new sensor in which the sensitivity is not configured.
Im not aware of a new version, do they work correctly with the original gateway?
Dear @Koenkk ,
If the news sensor are paired directly to the gateway usingin the xiaomi home app, i can see in the xiaomi app all logs correctly.
I have the gateway paired with domoticz using internal LAN way (without zigbe2mqtt) . If i link the new sensor with the gateway, domoticz detects only 1 device with four states. If i check this log device, I can see some empty detections (without value of vibration, tilt or drop) , also i can see correct detections. The problem is the same without zigbee2mqtt.
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days
Hi, any update on this ? I have also noticed the same than OP
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days
Dear @Koenkk ,
I have an old vibration sensor. Recently i bought two more sensors. I think that this two new sensor have a difference with my old sensor. They works different.
When a vibration appears, the old sensor always detect the vibration ( action: vibration) but the new sensors not always detect the action, almost never is detected.
I paste the log from the three sensors:
jul 25 11:30:40 raspberrypi npm[481]: zigbee2mqtt:info 2020-07-25 11:30:40: MQTT publish: topic 'zigbee2mqtt/Sensor vibracion', payload '{"battery":100,"voltage":3045,"linkquality":118,"angle":7,"angle_x":6,"angle_y":-78,"angle_z":11,"angle_x_absolute":84,"angle_y_absolute":168,"strength":19,"action":"vibration"}'
jul 25 12:14:12 raspberrypi npm[484]: zigbee2mqtt:info 2020-07-25 12:14:12: MQTT publish: topic 'zigbee2mqtt/sensor vibracion 2', payload '{"battery":100,"voltage":3015,"linkquality":118,"angle":5,"angle_x":10,"angle_y":-79,"angle_z":5,"angle_x_absolute":80,"angle_y_absolute":169,"sensitivity":"low","strength":51}'
jul 25 12:15:41 raspberrypi npm[484]: zigbee2mqtt:info 2020-07-25 12:15:41: MQTT publish: topic 'zigbee2mqtt/sensor vibracion balcon', payload '{"battery":68,"voltage":2945,"linkquality":63,"angle":6,"angle_x":12,"angle_y":-75,"angle_z":8,"angle_x_absolute":78,"angle_y_absolute":165,"strength":225}'
The first one log is the old version, and the other ones are the news. What is the difference? i check uptdates with the xiaomi gateway but i don't get firmware updates in any sensor. Looks like that they are the same model in state.json file
Thanks in advanced
Best regards