Closed jvcsw closed 2 years ago
Same problem here with the same model but different design. https://www.loratap.com/products/tuya-smart-life-zigbee-30-curtain-blind-switch-for-roller-shutter-electric-motor-google-home-alexa-echo-voice-control-diy
Zigbee2MQTT version: 1.21.0 Adapter hardware: Conbee II Adapter firmware version: deCONZ_RaspBeeII_0x26720700
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days
the problem persists
Issue still exists with my bseed device (_TZ3000_wptayaqr)
Same issue here
Zigbee Modell TS130F
Zigbee Hersteller _TZ3000_wptayaqr
Just an update. Has anyone found a fix or workaround?
Months later and same problem. Back-light doesn't change regardless of the settings. Low, Medium. High BSEED Zigbee curtain switch.
Same here with a LoraTap device.
Good morning,
I have this device (it's a Tuya TS130F white label)
https://www.loratap.com/products/tuya-smart-life-zigbee-30-curtain-blind-switch-for-roller-shutter-electric-motor-google-home-alexa-echo-voice-control-diy-1
All entities works fine less the backlight entity. I have devices with backlight on and anothers off. I don't know the reason.
The problem is:
When I change the entity value (from HA or Zigbee2mqtt frontend):
select.0x00000000000000_backlight_mode { LOW, MEDIUM, HIGH }
Nothing happens. The devices backlight not change the mode.
The log file has this:
Zigbee2MQTT:info 2021-08-31 12:03:58: MQTT publish: topic 'zigbee2mqtt/0x00000000000000/mode', payload '{"backlight":"MEDIUM"}'
Without errors but without changes.
Debug info
Zigbee2MQTT version: 1.21 Adapter hardware: CC2652R Adapter firmware version: 20210708
Thanks