search

Koshak1013 / HuananzhiX99_BIOS_mods

526 stars 109 forks source link

HUANANZHI-F8D X99 will the bios be updated #8

Open xArTeMkAgx opened 3 years ago

xArTeMkAgx commented 3 years ago

i installed your modified BIOS 2020/06/24 (X99MA012) HNX99F8D_200624_kot_v002.zip one and tried to make a turbo boost on your program, but it did not work out whether there will be a different or a new way of turbo boost

Koshak1013 commented 3 years ago

Please send (mppp4ik@gmail.com) the BIOS that you made, with which the unlock did not work

xArTeMkAgx commented 3 years ago

Пожалуйста, отправьте (mppp4ik@gmail.com) БИОС, который вы сделали, с которым разблокировка не работала

okay

Koshak1013 commented 3 years ago

Вы забыли удалить микрокод и изменить значения C-states ^-^

xArTeMkAgx commented 3 years ago

Вы забыли удалить микрокод и изменить значения C-states ^-^

and in which folder is it located ^-^

xArTeMkAgx commented 3 years ago

everything is where you described in the article about Instructions for unlocking the maximum frequency for all cores, not two (unlock) there

Koshak1013 commented 3 years ago

In the appeared utility "MMTool Aptio", click "Load Image" and select the required BIOS Go to the "CPU Patch" tab, select the "6F 06F2" microcode, mark "Delete a Patch Data", click Apply and agree Click "Save Image" and close "MMTool Aptio" In S3TurboTool, click AMIBCP In the appeared utility AMIBCP, open the BIOS Expand the list and follow the path "Common RefCode Configuration > IntelRCSetup > Advanced Power Management Configuration > CPU C State Control" (the path may differ on branded motherboards) On the right, in the Optimal column, double-click to change the value of the parameters: "Package C State limit" to "C2 state" "CPU C3 report" to "Enable" "CPU C6 report" to "Disable" Close the AMIBCP window and agree to save the changes made

xArTeMkAgx commented 3 years ago

I understood everything, thanks

wannsong commented 2 years ago

Hello, thank you very much for your guides! I am trying to flash bios on HUANANZHI-F8D X99. I downloaded your v002 bios file for this motherboard and then did every single step from Unlocking guide. I installed DXE driver and everything, but when i try to flash the bios (last step) i get Error 26: "The host CPU does not have write access to the target flash area". Did i do something wrong?

Koshak1013 commented 2 years ago

Thanks for the kind words. I'm sorry, I didn't specify, but it is on this board that you need to use another flash program - AfuDos or AfuWin

wannsong commented 2 years ago

Ohhh, I see, is there maybe a guide for them as I never worked with them and everything is pretty new for me. I will be very thankful.

P.S. I found a guide it's on russian but i think google translate will do :D . Guide says that i have to use Rufus and put .rom file there but the file that i downloaded from you with bios v002 is .bin is this a problem?