Open roigcarlo opened 5 months ago
The ConvectionDiffusionApp
should be CORE right?. One question, the testing level and trustability of Core apps and utilities is the same?
The
ConvectionDiffusionApp
should be CORE right?. One question, the testing level and trustability of Core apps and utilities is the same?
And what about ContactStructuralMechanicsApplication
?, I think should be Utility.
EigenSolversApplication is legacy, and it was replaced with LinerSolverApplication
The
ConvectionDiffusionApp
should be CORE right?. One question, the testing level and trustability of Core apps and utilities is the same?And what about
ContactStructuralMechanicsApplication
?, I think should be Utility.
Indeed
I have also doubts in classifying the DEMApplication
The
ConvectionDiffusionApp
should be CORE right?. One question, the testing level and trustability of Core apps and utilities is the same?
@KratosMultiphysics/technical-committee consider this as a core and transversal feature which should go into the core applications. Nevertheless, it needs some cleanup and documentation before be added.
I have also doubts in classifying the
DEMApplication
@KratosMultiphysics/technical-committee understands the importance and uniqueness of the @KratosMultiphysics/dem . However, we have concerns about its compatibility with the rest of the applications and in the format of the ProjectParamter.json. So, we would suggest to improve the compatibility and then we will consider its addition as a core application, given the extensive tests.
Also, we have concerns about the level of the maintenance and how fast they fix the errors and fixing backward incompatibilities.
Of course, addressing those concerns we are happy to add it to the core.
ContactStructuralMechanicsApplication
@KratosMultiphysics/technical-committee consider it to be in a very good state. Nevertheless, our impression is that it is not ready yet for generic usage and not mature enough to be used without deep knowledge of it. Adding that it is not supported by the user interfaces makes its usage more difficult and more on the research side.
The status can hopefully change in the future when it gets more usage and being more battle tested.
ContactStructuralMechanicsApplication
@KratosMultiphysics/technical-committee consider it to be in a very good state. Nevertheless, our impression is that it is not ready yet for generic usage and not mature enough to be used without deep knowledge of it. Adding that it is not supported by the user interfaces makes its usage more difficult and more on the research side.
The status can hopefully change in the future when it gets more usage and being more battle tested.
GUI is supported by GiD
ContactStructuralMechanicsApplication
@KratosMultiphysics/technical-committee consider it to be in a very good state. Nevertheless, our impression is that it is not ready yet for generic usage and not mature enough to be used without deep knowledge of it. Adding that it is not supported by the user interfaces makes its usage more difficult and more on the research side. The status can hopefully change in the future when it gets more usage and being more battle tested.
GUI is supported by GiD
It is indeed, I use the GiD GUI a lot in contact.
ContactStructuralMechanicsApplication
@KratosMultiphysics/technical-committee consider it to be in a very good state. Nevertheless, our impression is that it is not ready yet for generic usage and not mature enough to be used without deep knowledge of it. Adding that it is not supported by the user interfaces makes its usage more difficult and more on the research side. The status can hopefully change in the future when it gets more usage and being more battle tested.
GUI is supported by GiD
It is indeed, I use the GiD GUI a lot in contact.
In this regard we also noted that GiD is not open-source, and not quite popular in other research groups/companies other than CIMNE.
ContactStructuralMechanicsApplication
@KratosMultiphysics/technical-committee consider it to be in a very good state. Nevertheless, our impression is that it is not ready yet for generic usage and not mature enough to be used without deep knowledge of it. Adding that it is not supported by the user interfaces makes its usage more difficult and more on the research side. The status can hopefully change in the future when it gets more usage and being more battle tested.
GUI is supported by GiD
It is indeed, I use the GiD GUI a lot in contact.
In this regard we also noted that GiD is not open-source, and not quite popular in other research groups/companies other than CIMNE.
I can buy the argument that my application is "not matured enough", because that could be technically true. But the open source of the GUI is quite non-consistent argument, as to my knowledge the open source GUI support is quite limited.
@loumalouomega if we ask for your honest feedback, do you think that the ContactMechanicsApplication is at the same level of stability/maturity than the other applications? I am asking for your open feedback. My personal concern, even more than the GUI (i think it is not trivial to have WORKING examples without some inner knowledge) is that if we decide for making it "core" we will need to guarantee backward compatibility, ensure its usability from the GUIs, be more conservatives in future changes, etc. That is, if we decide to go that way it will need resources/effort to be poured into it
@loumalouomega if we ask for your honest feedback, do you think that the ContactMechanicsApplication is at the same level of stability/maturity than the other applications? I am asking for your open feedback. My personal concern, even more than the GUI (i think it is not trivial to have WORKING examples without some inner knowledge) is that if we decide for making it "core" we will need to guarantee backward compatibility, ensure its usability from the GUIs, be more conservatives in future changes, etc. That is, if we decide to go that way it will need resources/effort to be poured into it
I was not asking to be core app as it is of course not matured enough. I was asking to be utility. I understand that the application includes physics not only utilities, but it is accesorial to the StructuralMechanicsApplication
.
I can understand that the GUI is maybe not robust enough, my comment was to say that there is GUI support, and I commented that I didn't buy that the GUI was not open source, becasue applying that argument almost nothing has opensourced GUI support.
@loumalouomega, let me clarify something based on your last response.
Utility applications necessarily need to not include any physics. The ContactStructuralMechanicsApplication
does so, meaning that it cannot be a utility application. Hence, it can only be either core application or research.
@KratosMultiphysics/technical-committee maybe we need to further clarify this.
@loumalouomega, let me clarify something based on your last response.
Utility applications necessarily need to not include any physics. The
ContactStructuralMechanicsApplication
does so, meaning that it cannot be a utility application. Hence, it can only be either core application or research.@KratosMultiphysics/technical-committee maybe we need to further clarify this.
In that case I can understand the decission, but maybe some intermediate category is necessary. For example the ConstitutiveLawsApplication
(@AlejandroCornejo) for most laws is quite stable, but there are some research developments too. And at the same time is a "sub app" like ContactStructuralMechanicsApplication
which is nothing without StructuralMechanicsApplication
. A priori ConstitutiveLawsApplication
is more generic and can be used in more apps, but does "nothing" without those apps.
@roigcarlo is there any way to set a timeout for how long a feature can be stuck in the Future
namespace (as well as in a deprecated state)? I wouldn't want to end up in a fractured mess that noone would take care of updating.
What I'd like to see is something like a date, after which a given function/class/whatever would fail to compile. Then someone would be forced to take a look and decide whether to move it from Future
to the standard namespace, or prolong the timer.
Example:
namespace Future {
KRATOS_TIMED_DEPRECATION(1, 4, 2024) // <== fails to compile after the 1st of April, 2024
void NewStuff() {}
} // namespace Future
P.S.: this feature would obviously be disabled by default, and only enabled in the CI.
Yes I can add that check at compile time, no problem
@roigcarlo is there any way to set a timeout for how long a feature can be stuck in the
Future
namespace (as well as in a deprecated state)? I wouldn't want to end up in a fractured mess that noone would take care of updating.What I'd like to see is something like a date, after which a given function/class/whatever would fail to compile. Then someone would be forced to take a look and decide whether to move it from
Future
to the standard namespace, or prolong the timer.Example:
namespace Future { KRATOS_TIMED_DEPRECATION(1, 4, 2024) // <== fails to compile after the 1st of April, 2024 void NewStuff() {} } // namespace Future
P.S.: this feature would obviously be disabled by default, and only enabled in the CI.
Just to mention I tried to add that long time ago and didn't worked, but maybe now with better compilers will work
Yep I remember, we were using the wrong approach. We can obtain the epoch from the system through cmake and let the macros handle the conversions to use time.
Yep I remember, we were using the wrong approach. We can obtain the epoch from the system through cmake and let the macros handle the conversions to use time.
@loumalouomega btw I merged #11790 which has a list of applications. That's not final but I needed a name and an initial, what we decide here will reflect in that list (don't kill me pls :pray: )
Hola Carlos
Por favor bórrame de todos estos enlaces a conversaciones de Kratos. Se lo pedí a Ruben y a Alejandro hace unos días. Me dicen que tú puedes hacerlo.
Gracias y saludos
Eugenio
Eugenio Oñate
Emeritus Professor at School of Civil Engineering, Univ. Politècnica de Catalunya (UPC)
Senior Dinstinguished Researcher at International Center for Numerical Methods in Engineering (CIMNE)
Scientific Director of Severo Ochoa Program of Excelence at CIMNE
Gran Capità s/n, Campus Nord UPC, Ed. C1 - 08034 Barcelona – Spain
T.(+34) 629738653 - @.> @. – http://www.cimne.com/eo www.cimne.com/eo
Since 1987 generating knowledge and solutions
http://www.cimne.com/ www.cimne.com
De: Carlos Roig @. Enviado el: lunes, 18 de marzo de 2024 11:18 Para: KratosMultiphysics/Kratos @.> CC: eonate @.>; Team mention @.> Asunto: Re: [KratosMultiphysics/Kratos] Organization of Kratos Core and Application Tiers (Issue #12136)
https://github.com/loumalouomega @loumalouomega btw I merged https://github.com/KratosMultiphysics/Kratos/pull/11790 #11790 which has a list of applications. That's not final but I needed a name and an initial, what we decide here will reflect in that list (don't kill me pls 🙏 )
— Reply to this email directly, https://github.com/KratosMultiphysics/Kratos/issues/12136#issuecomment-2003470153 view it on GitHub, or https://github.com/notifications/unsubscribe-auth/AISATDDB6BO3HIVEVROXHYLYY25N5AVCNFSM6AAAAABEFAKJ3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBTGQ3TAMJVGM unsubscribe. You are receiving this because you are on a team that was mentioned.Message ID: @.***>
Dear @KratosMultiphysics/all
As you may have noticed, Kratos has rapidly evolved this past years and has been adopted by many new developers. While this is good, it has also deepened some of the chronicle problems of Kratos:
From the technical committee we have been monitoring these issue for quite some time and trying to come up with solutions. After long discussing, we would like to propose a roadmap of changes intended to solve this problems. Of course the intention of this issue is to discuss what you think about the changes and make adjustments if you deem necessary:
Creation of Kratos::Future and Kratos::Legacy
The first and probably most important change we propose is the creation of two namespaces in the Kratos core (yes, we will finally have namespaces):
These namespaces: Future & Legacy will be the place to put all the changes affecting the core that need a relatively long developing time, which are not final, or that are simply needed in a particular moment in time and are not finished or have ongoing issues/discussions associated with them.
In any case these namespaces will not be a sandbox to include arbitrary features. Its just a previous place to indicate that some feature or change that has been already approved will be merged in a close future but is not yet ready for general use or will be removed soon.
We will explicit prohibit the usage of using
namespace Kratos::Future
/using namespace Kratos::Legacy
. Future and Legacy features will need to be explicitly called in the sections of the code where are used.In the case a
Kratos::Future
affects a critical part of the core, or introduces API breaking changes, we will maintain a older version of such code inKratos::Legacy
for some time, until the changes are made definitive. Think of this as an evolvedKRATOS_DEPRECATED
macro.Overall things will look like this (example of a change in a utility):
Original Code
Someone updates MyCoreUtility to work with model and parameters, needs it integrated but still has issues or breaks the current api, code is included in
Kratos::Future
:After some time, implementation is final, new code moves out of
Kratos::Future
old code gets moved toKratos::Legacy
After some time,
Kratos::Legacy
implementation gets removed.Removal of code owners from certain parts of the core
As mentioned in the introduction, the current developers from tech and implementation committee are just not enough to review all the changes that need to be made into the core. In order to address this issue we plan to restrain the areas in which a explicit approval from the TC is necessary to merge. A lot of you have suggested that parts of the core should not have that level of control, we agree and our initial proposal is to exclude
kratos\utilities
andkratos\processes
to see how things evolve, and extend this to other non critical parts of the core.This should help to alleviate the number of stalled PR in the core. We are very interested in hear which parts of the core you think are not critical and could be included in this exclusion list.
Application Tiers
This is not new, and has previously been discussed but never really implemented. Right now there is simply too much applications in Kratos, with very different levels of maturity.
While this is good, because it means that many people are developing, it es very confusing from a newcomer to know what they can try or trust.
Our proposal in this regard is to physically split (put them in different folder) applications in different tiers. Each of the list will be decision of the TC.
The initial proposal from the Tc is: Core:
Utilities:
The intention with this change is to provide as smaller subset of Kratos which is not threatening to new users. This will also allow for some technical changes to mitigate the disk usage stress on the CI by layers the compilation process.