can't print unless selecting another printer and then back again after update to latest plugin version from marketplace

Describe the bug can't print unless selecting another printer and then back again after update to latest plugin version from marketplace

To Reproduce Steps to reproduce the behavior:

Have printer "a" activated, which currently uses the plugin.
Go to marketplace and update plugin to latest version. restart cura.
Go to settings -> printer -> manage printer.
Click on "Connect Duet RepRapFirmware"
Configure. Click the "Save Config Button"
There is no way to print after the configuration change to printer "a".
Activate another printer in the list. Activate printer "a" again.
Now the button shows up to print to printer "a".

Expected behavior After slicing, "Print on printer a" button should be available.

Version Information

Operating System: Windows 10 Pro Version 20H2 (OS Build 19042.746)
Cura Version: 4.8.0
Cura-DuetRRFPlugin Version and Installation: 1.2.1 installed via Marketplace
Duet RepRapFirmware Version: RepRapFirmware for Duet 2 WiFi/Ethernet version 3.2 running on Duet Ethernet 1.02 or later.

Images

Cura Log 2021-01-27 08:46:47,663 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [170]: Prusa i3-simulate | Filename set to: PI3_556Funnel.gcode 2021-01-27 08:46:47,666 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [183]: Prusa i3-simulate | Loading gcode... 2021-01-27 08:46:47,761 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [194]: Prusa i3-simulate | Connecting... 2021-01-27 08:46:47,787 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onUploadReady [219]: Prusa i3-simulate | Uploading... 2021-01-27 08:46:55,583 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onUploadDone [245]: Prusa i3-simulate | Upload done 2021-01-27 08:46:55,584 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onUploadDone [251]: Prusa i3-simulate | Simulating... 2021-01-27 08:46:55,585 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onUploadDone [260]: Prusa i3-simulate | Sending gcode:M37 P"0:/gcodes/PI3_556Funnel.gcode" 2021-01-27 08:46:55,598 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onSimulationPrintStarted [339]: Prusa i3-simulate | Simulation print started for file PI3_556Funnel.gcode 2021-01-27 08:46:57,608 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:46:57,641 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:46:57,641 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[107.527,75.239,0.400],"machine":[83.038,80.991,0.400],"extr":[187.9]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":294.0,"currentLayer":2,"currentLayerTime":1.6,"extrRaw":[189.8],"fractionPrinted":2.9,"filePosition":76812,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":2.0,"warmUpDuration":0.0,"timesLeft":{"file":72.0,"filament":13.1,"layer":3.3}} 2021-01-27 08:46:58,643 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:46:58,664 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:46:58,664 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[103.104,73.099,0.700],"machine":[77.447,85.750,0.700],"extr":[272.3]},"speeds":{"requested":27.5,"top":27.5},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":295.0,"currentLayer":3,"currentLayerTime":0.2,"extrRaw":[273.8],"fractionPrinted":4.4,"filePosition":116727,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":3.1,"warmUpDuration":0.0,"timesLeft":{"file":77.4,"filament":31.9,"layer":68.5}} 2021-01-27 08:46:59,666 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:46:59,686 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:46:59,686 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[94.656,76.611,0.700],"machine":[76.990,87.305,0.700],"extr":[327.3]},"speeds":{"requested":22.5,"top":22.5},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":296.0,"currentLayer":3,"currentLayerTime":1.2,"extrRaw":[329.1],"fractionPrinted":5.9,"filePosition":156633,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":4.1,"warmUpDuration":0.0,"timesLeft":{"file":76.2,"filament":31.0,"layer":67.5}} 2021-01-27 08:47:00,688 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:00,708 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:00,709 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[107.237,122.248,0.980],"machine":[77.861,107.571,0.980],"extr":[402.7]},"speeds":{"requested":20.0,"top":20.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":297.0,"currentLayer":5,"currentLayerTime":0.5,"extrRaw":[404.6],"fractionPrinted":7.3,"filePosition":194960,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":5.1,"warmUpDuration":0.0,"timesLeft":{"file":64.7,"filament":30.9,"layer":52.8}} 2021-01-27 08:47:01,710 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:01,734 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:01,735 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[124.355,102.293,0.980],"machine":[124.249,96.814,0.980],"extr":[458.4]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":298.0,"currentLayer":5,"currentLayerTime":1.5,"extrRaw":[458.4],"fractionPrinted":8.8,"filePosition":235140,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":6.1,"warmUpDuration":0.0,"timesLeft":{"file":63.7,"filament":30.0,"layer":51.8}} 2021-01-27 08:47:02,736 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:02,757 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:02,757 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[99.038,121.578,1.260],"machine":[79.572,92.990,1.260],"extr":[466.1]},"speeds":{"requested":25.0,"top":5.9},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":299.0,"currentLayer":6,"currentLayerTime":0.1,"extrRaw":[468.0],"fractionPrinted":10.4,"filePosition":278497,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":7.1,"warmUpDuration":0.0,"timesLeft":{"file":60.8,"filament":33.6,"layer":62.8}} 2021-01-27 08:47:03,758 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:03,780 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:03,781 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[75.497,94.832,1.260],"machine":[91.824,123.672,1.260],"extr":[532.9]},"speeds":{"requested":20.0,"top":20.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.7],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.7}]},"time":300.0,"currentLayer":6,"currentLayerTime":1.1,"extrRaw":[534.6],"fractionPrinted":11.9,"filePosition":317325,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":8.2,"warmUpDuration":0.0,"timesLeft":{"file":59.8,"filament":32.5,"layer":61.8}} 2021-01-27 08:47:04,782 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:04,836 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:04,836 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[122.345,109.302,1.260],"machine":[109.374,122.556,1.260],"extr":[560.9]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":302.0,"currentLayer":6,"currentLayerTime":2.2,"extrRaw":[561.4],"fractionPrinted":13.5,"filePosition":360666,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":9.2,"warmUpDuration":0.0,"timesLeft":{"file":58.7,"filament":32.0,"layer":60.7}} 2021-01-27 08:47:05,838 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:05,859 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:05,859 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[88.156,120.193,1.540],"machine":[79.663,88.398,1.540],"extr":[599.0]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.5}]},"time":303.0,"currentLayer":8,"currentLayerTime":0.2,"extrRaw":[600.8],"fractionPrinted":15.0,"filePosition":401781,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":10.2,"warmUpDuration":0.0,"timesLeft":{"file":57.0,"filament":34.5,"layer":60.6}} 2021-01-27 08:47:06,860 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:06,890 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:06,890 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[92.901,77.062,1.540],"machine":[97.342,75.873,1.540],"extr":[661.7]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":304.0,"currentLayer":8,"currentLayerTime":1.2,"extrRaw":[661.9],"fractionPrinted":16.5,"filePosition":440986,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":11.3,"warmUpDuration":0.0,"timesLeft":{"file":56.0,"filament":33.4,"layer":59.6}} 2021-01-27 08:47:07,891 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:07,909 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:07,910 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[79.326,92.949,1.800],"machine":[112.582,117.856,1.540],"extr":[666.7]},"speeds":{"requested":50.0,"top":50.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":305.0,"currentLayer":8,"currentLayerTime":2.2,"extrRaw":[665.8],"fractionPrinted":18.1,"filePosition":484800,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":12.3,"warmUpDuration":0.0,"timesLeft":{"file":54.9,"filament":33.3,"layer":58.5}} 2021-01-27 08:47:08,911 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:08,948 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:08,949 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[110.264,122.438,1.800],"machine":[123.246,91.725,1.800],"extr":[731.7]},"speeds":{"requested":20.0,"top":20.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":306.0,"currentLayer":9,"currentLayerTime":0.9,"extrRaw":[733.4],"fractionPrinted":19.6,"filePosition":524230,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":13.3,"warmUpDuration":0.0,"timesLeft":{"file":53.8,"filament":35.0,"layer":65.1}} 2021-01-27 08:47:09,950 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:09,967 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:09,968 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[110.638,121.574,1.800],"machine":[102.903,123.653,1.800],"extr":[759.8]},"speeds":{"requested":50.0,"top":26.7},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.5}]},"time":307.0,"currentLayer":9,"currentLayerTime":1.9,"extrRaw":[760.0],"fractionPrinted":21.2,"filePosition":566401,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":14.4,"warmUpDuration":0.0,"timesLeft":{"file":52.7,"filament":34.5,"layer":64.0}} 2021-01-27 08:47:10,970 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:10,992 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:10,993 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[116.741,115.103,2.040],"machine":[116.101,84.217,2.040],"extr":[790.1]},"speeds":{"requested":20.0,"top":20.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":308.0,"currentLayer":10,"currentLayerTime":0.5,"extrRaw":[791.5],"fractionPrinted":22.7,"filePosition":608024,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":15.4,"warmUpDuration":0.0,"timesLeft":{"file":51.6,"filament":39.2,"layer":81.5}} 2021-01-27 08:47:11,994 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:12,016 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:12,017 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[94.939,78.251,2.040],"machine":[90.718,79.687,2.040],"extr":[798.4]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":309.0,"currentLayer":10,"currentLayerTime":1.5,"extrRaw":[798.5],"fractionPrinted":24.3,"filePosition":651493,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":16.4,"warmUpDuration":0.0,"timesLeft":{"file":50.5,"filament":39.0,"layer":80.5}} 2021-01-27 08:47:13,019 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:13,044 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:13,044 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[117.473,88.067,2.460],"machine":[96.548,120.876,2.460],"extr":[828.1]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":310.0,"currentLayer":12,"currentLayerTime":0.1,"extrRaw":[829.9],"fractionPrinted":25.8,"filePosition":691035,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":17.4,"warmUpDuration":0.0,"timesLeft":{"file":49.4,"filament":43.3,"layer":56.4}} 2021-01-27 08:47:14,045 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:14,064 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:14,064 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[79.277,96.248,2.820],"machine":[86.841,82.052,2.640],"extr":[863.3]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":311.0,"currentLayer":13,"currentLayerTime":0.6,"extrRaw":[863.5],"fractionPrinted":27.3,"filePosition":730537,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":18.5,"warmUpDuration":0.0,"timesLeft":{"file":48.5,"filament":48.8,"layer":57.5}} 2021-01-27 08:47:15,065 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:15,083 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:15,084 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[85.870,83.699,3.010],"machine":[120.044,96.344,3.010],"extr":[890.8]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":312.0,"currentLayer":15,"currentLayerTime":0.4,"extrRaw":[892.3],"fractionPrinted":28.8,"filePosition":769599,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":19.5,"warmUpDuration":0.0,"timesLeft":{"file":49.4,"filament":52.3,"layer":29.2}} 2021-01-27 08:47:16,086 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:16,102 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:16,103 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[117.386,112.029,3.420],"machine":[92.203,119.109,3.420],"extr":[922.3]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":313.0,"currentLayer":16,"currentLayerTime":0.8,"extrRaw":[923.0],"fractionPrinted":30.2,"filePosition":808849,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":20.5,"warmUpDuration":0.0,"timesLeft":{"file":48.2,"filament":48.1,"layer":21.1}} 2021-01-27 08:47:17,104 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:17,124 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:17,125 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[90.447,118.849,3.640],"machine":[118.653,109.931,3.640],"extr":[956.9]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":314.0,"currentLayer":18,"currentLayerTime":0.4,"extrRaw":[958.2],"fractionPrinted":31.7,"filePosition":848270,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":21.5,"warmUpDuration":0.0,"timesLeft":{"file":47.4,"filament":48.3,"layer":20.2}} 2021-01-27 08:47:18,126 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:18,148 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:18,148 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[100.876,79.885,4.110],"machine":[120.637,100.272,4.110],"extr":[989.0]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":315.0,"currentLayer":20,"currentLayerTime":0.0,"extrRaw":[989.7],"fractionPrinted":33.2,"filePosition":887568,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":22.5,"warmUpDuration":0.0,"timesLeft":{"file":46.5,"filament":45.5,"layer":20.5}} 2021-01-27 08:47:19,150 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:19,182 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:19,182 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[108.737,119.126,4.360],"machine":[119.626,92.451,4.360],"extr":[1031.1]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":316.0,"currentLayer":22,"currentLayerTime":0.2,"extrRaw":[1032.5],"fractionPrinted":34.6,"filePosition":927360,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":23.6,"warmUpDuration":0.0,"timesLeft":{"file":45.5,"filament":39.6,"layer":15.5}} 2021-01-27 08:47:20,184 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:20,203 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:20,204 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[105.984,81.486,4.890],"machine":[109.247,117.119,4.890],"extr":[1066.5]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":317.0,"currentLayer":24,"currentLayerTime":0.3,"extrRaw":[1068.6],"fractionPrinted":36.1,"filePosition":966259,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":24.6,"warmUpDuration":0.0,"timesLeft":{"file":44.8,"filament":36.3,"layer":13.3}} 2021-01-27 08:47:21,205 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:21,225 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:21,225 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[105.861,81.692,5.450],"machine":[80.342,96.019,5.450],"extr":[1111.5]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":318.0,"currentLayer":26,"currentLayerTime":0.5,"extrRaw":[1113.2],"fractionPrinted":37.6,"filePosition":1005513,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":25.6,"warmUpDuration":0.0,"timesLeft":{"file":43.7,"filament":37.7,"layer":9.2}} 2021-01-27 08:47:22,228 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:22,252 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:22,253 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[119.652,100.798,5.730],"machine":[101.203,80.369,5.730],"extr":[1154.1]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":319.0,"currentLayer":29,"currentLayerTime":0.1,"extrRaw":[1155.6],"fractionPrinted":39.0,"filePosition":1045098,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":26.6,"warmUpDuration":0.0,"timesLeft":{"file":42.6,"filament":34.1,"layer":9.2}} 2021-01-27 08:47:23,254 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:23,277 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:23,278 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[107.102,82.212,6.290],"machine":[117.239,107.056,6.290],"extr":[1192.5]},"speeds":{"requested":50.0,"top":50.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":320.0,"currentLayer":31,"currentLayerTime":0.1,"extrRaw":[1193.2],"fractionPrinted":40.5,"filePosition":1084206,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":27.7,"warmUpDuration":0.0,"timesLeft":{"file":41.5,"filament":29.0,"layer":9.1}} 2021-01-27 08:47:24,279 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:24,301 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:24,301 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[116.384,110.538,6.570],"machine":[110.869,83.834,6.570],"extr":[1236.7]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":321.0,"currentLayer":33,"currentLayerTime":0.3,"extrRaw":[1238.2],"fractionPrinted":42.0,"filePosition":1123625,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":28.7,"warmUpDuration":0.0,"timesLeft":{"file":40.6,"filament":32.3,"layer":6.5}} 2021-01-27 08:47:25,302 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:25,321 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:25,321 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[108.325,115.380,7.130],"machine":[82.893,96.365,7.130],"extr":[1275.0]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.5}]},"time":322.0,"currentLayer":35,"currentLayerTime":0.1,"extrRaw":[1277.0],"fractionPrinted":43.4,"filePosition":1163034,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":29.7,"warmUpDuration":0.0,"timesLeft":{"file":39.5,"filament":32.0,"layer":7.7}} 2021-01-27 08:47:26,323 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:26,344 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:26,344 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[117.569,102.320,7.690],"machine":[97.268,117.438,7.690],"extr":[1316.1]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.7],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.7}]},"time":323.0,"currentLayer":37,"currentLayerTime":0.6,"extrRaw":[1316.9],"fractionPrinted":44.9,"filePosition":1202671,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":30.7,"warmUpDuration":0.0,"timesLeft":{"file":38.1,"filament":30.0,"layer":4.7}} 2021-01-27 08:47:27,345 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:27,391 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:27,392 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[117.534,94.103,7.970],"machine":[96.640,81.808,7.970],"extr":[1358.3]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.5,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.5,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.5},{"name":"hotend","temp":21.5}]},"time":324.0,"currentLayer":40,"currentLayerTime":0.2,"extrRaw":[1359.5],"fractionPrinted":46.4,"filePosition":1242810,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":31.8,"warmUpDuration":0.0,"timesLeft":{"file":37.2,"filament":25.2,"layer":3.8}} 2021-01-27 08:47:28,393 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:28,414 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:28,414 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[100.246,116.506,8.530],"machine":[87.214,89.558,8.530],"extr":[1394.6]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":325.0,"currentLayer":43,"currentLayerTime":0.0,"extrRaw":[1396.4],"fractionPrinted":47.9,"filePosition":1282450,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":32.8,"warmUpDuration":0.0,"timesLeft":{"file":36.3,"filament":26.8,"layer":2.8}} 2021-01-27 08:47:29,417 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:29,434 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:29,434 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[108.249,115.037,9.090],"machine":[84.316,106.944,9.090],"extr":[1433.4]},"speeds":{"requested":50.0,"top":50.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":326.0,"currentLayer":45,"currentLayerTime":0.0,"extrRaw":[1434.3],"fractionPrinted":49.4,"filePosition":1322018,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":33.8,"warmUpDuration":0.0,"timesLeft":{"file":35.0,"filament":26.9,"layer":2.2}} 2021-01-27 08:47:30,436 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:30,455 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:30,456 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[83.014,102.130,9.370],"machine":[101.053,117.087,9.370],"extr":[1471.1]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":327.0,"currentLayer":47,"currentLayerTime":0.3,"extrRaw":[1472.3],"fractionPrinted":50.9,"filePosition":1361628,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":34.8,"warmUpDuration":0.0,"timesLeft":{"file":33.8,"filament":28.4,"layer":0.9}} 2021-01-27 08:47:31,457 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:31,476 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:31,476 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[115.474,104.695,9.930],"machine":[88.324,110.833,9.930],"extr":[1504.2]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":328.0,"currentLayer":49,"currentLayerTime":0.1,"extrRaw":[1505.8],"fractionPrinted":52.4,"filePosition":1401389,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":35.9,"warmUpDuration":0.0,"timesLeft":{"file":32.8,"filament":27.9,"layer":0.4}} 2021-01-27 08:47:32,477 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:32,511 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:32,512 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[90.359,87.012,10.490],"machine":[84.747,107.350,10.210],"extr":[1543.2]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.5}]},"time":329.0,"currentLayer":51,"currentLayerTime":0.5,"extrRaw":[1544.4],"fractionPrinted":53.8,"filePosition":1441092,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":36.9,"warmUpDuration":0.0,"timesLeft":{"file":32.0,"filament":26.6,"layer":0.1}} 2021-01-27 08:47:33,513 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:33,532 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:33,533 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[93.320,86.638,10.770],"machine":[114.700,97.336,10.770],"extr":[1575.6]},"speeds":{"requested":25.0,"top":13.5},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":330.0,"currentLayer":54,"currentLayerTime":0.1,"extrRaw":[1576.9],"fractionPrinted":55.3,"filePosition":1480665,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":37.9,"warmUpDuration":0.0,"timesLeft":{"file":30.7,"filament":24.5,"layer":0.1}} 2021-01-27 08:47:34,534 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:34,553 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:34,553 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[101.995,85.025,11.330],"machine":[113.877,105.957,11.330],"extr":[1609.0]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":331.0,"currentLayer":56,"currentLayerTime":0.1,"extrRaw":[1609.9],"fractionPrinted":56.8,"filePosition":1520532,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":38.9,"warmUpDuration":0.0,"timesLeft":{"file":29.8,"filament":24.4,"layer":0.1}} 2021-01-27 08:47:35,554 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:35,576 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:35,576 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[115.314,95.537,11.610],"machine":[97.115,84.312,11.610],"extr":[1644.8]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":332.0,"currentLayer":58,"currentLayerTime":0.4,"extrRaw":[1645.9],"fractionPrinted":58.3,"filePosition":1560325,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":40.0,"warmUpDuration":0.0,"timesLeft":{"file":28.8,"filament":25.4,"layer":0.1}} 2021-01-27 08:47:36,577 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:36,600 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:36,600 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[103.511,113.511,12.170],"machine":[86.050,100.495,12.170],"extr":[1675.8]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":333.0,"currentLayer":60,"currentLayerTime":0.2,"extrRaw":[1677.1],"fractionPrinted":59.8,"filePosition":1599901,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":41.0,"warmUpDuration":0.0,"timesLeft":{"file":27.7,"filament":24.6,"layer":0.1}} 2021-01-27 08:47:37,601 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:37,626 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:37,627 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[114.368,102.601,12.730],"machine":[93.252,112.403,12.730],"extr":[1709.0]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.5,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.5,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.5},{"name":"hotend","temp":21.6}]},"time":334.0,"currentLayer":62,"currentLayerTime":0.6,"extrRaw":[1709.8],"fractionPrinted":61.3,"filePosition":1639545,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":42.0,"warmUpDuration":0.0,"timesLeft":{"file":26.9,"filament":22.0,"layer":0.1}} 2021-01-27 08:47:38,629 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:38,648 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:38,648 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[88.821,90.045,13.010],"machine":[90.092,110.681,13.010],"extr":[1741.1]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":335.0,"currentLayer":65,"currentLayerTime":0.4,"extrRaw":[1742.2],"fractionPrinted":62.7,"filePosition":1679355,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":43.0,"warmUpDuration":0.0,"timesLeft":{"file":25.8,"filament":21.3,"layer":0.1}} 2021-01-27 08:47:39,650 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:39,670 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:39,670 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[111.437,93.059,13.570],"machine":[106.334,111.784,13.570],"extr":[1769.9]},"speeds":{"requested":30.0,"top":16.2},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":336.0,"currentLayer":67,"currentLayerTime":0.0,"extrRaw":[1770.9],"fractionPrinted":64.2,"filePosition":1718540,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":44.1,"warmUpDuration":0.0,"timesLeft":{"file":24.8,"filament":21.5,"layer":0.1}} 2021-01-27 08:47:40,671 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:40,689 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:40,689 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[112.301,105.486,13.850],"machine":[91.378,88.492,13.850],"extr":[1802.7]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":337.0,"currentLayer":69,"currentLayerTime":0.4,"extrRaw":[1802.9],"fractionPrinted":65.7,"filePosition":1757633,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":45.1,"warmUpDuration":0.0,"timesLeft":{"file":24.0,"filament":21.2,"layer":0.1}} 2021-01-27 08:47:41,691 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:41,714 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:41,714 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[89.001,92.022,14.410],"machine":[107.058,89.817,14.410],"extr":[1829.9]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.5,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.5,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.5},{"name":"hotend","temp":21.6}]},"time":338.0,"currentLayer":72,"currentLayerTime":0.3,"extrRaw":[1830.8],"fractionPrinted":67.1,"filePosition":1796508,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":46.1,"warmUpDuration":0.0,"timesLeft":{"file":22.9,"filament":20.2,"layer":0.1}} 2021-01-27 08:47:42,715 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:42,738 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:42,738 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[88.047,103.299,14.970],"machine":[99.444,86.978,14.970],"extr":[1859.3]},"speeds":{"requested":50.0,"top":39.5},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.5}]},"time":339.0,"currentLayer":74,"currentLayerTime":0.1,"extrRaw":[1860.4],"fractionPrinted":68.6,"filePosition":1836061,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":47.1,"warmUpDuration":0.0,"timesLeft":{"file":21.8,"filament":19.1,"layer":0.0}} 2021-01-27 08:47:43,740 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:43,760 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:43,760 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[96.295,87.864,15.530],"machine":[100.913,87.792,15.250],"extr":[1891.7]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":340.0,"currentLayer":76,"currentLayerTime":0.5,"extrRaw":[1891.9],"fractionPrinted":70.1,"filePosition":1875371,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":48.1,"warmUpDuration":0.0,"timesLeft":{"file":20.9,"filament":18.6,"layer":0.1}} 2021-01-27 08:47:44,761 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:44,782 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:44,783 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[88.185,104.399,15.810],"machine":[108.285,109.501,15.810],"extr":[1919.9]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":341.0,"currentLayer":79,"currentLayerTime":0.3,"extrRaw":[1921.0],"fractionPrinted":71.5,"filePosition":1914808,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":49.2,"warmUpDuration":0.0,"timesLeft":{"file":19.8,"filament":17.7,"layer":0.1}} 2021-01-27 08:47:45,785 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:45,811 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:45,811 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[91.489,93.002,16.370],"machine":[108.138,91.991,16.370],"extr":[1947.6]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":343.0,"currentLayer":81,"currentLayerTime":0.1,"extrRaw":[1948.5],"fractionPrinted":73.0,"filePosition":1954118,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":50.2,"warmUpDuration":0.0,"timesLeft":{"file":18.6,"filament":16.9,"layer":0.1}} 2021-01-27 08:47:46,811 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:46,832 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:46,833 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[100.341,111.655,16.930],"machine":[111.181,99.867,16.930],"extr":[1977.1]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":344.0,"currentLayer":83,"currentLayerTime":0.6,"extrRaw":[1977.6],"fractionPrinted":74.5,"filePosition":1993688,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":51.2,"warmUpDuration":0.0,"timesLeft":{"file":17.7,"filament":16.1,"layer":0.1}} 2021-01-27 08:47:47,835 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:47,858 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:47,859 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[100.356,88.864,17.210],"machine":[88.107,101.798,17.210],"extr":[2007.2]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":345.0,"currentLayer":86,"currentLayerTime":0.4,"extrRaw":[2008.2],"fractionPrinted":76.0,"filePosition":2033294,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":52.2,"warmUpDuration":0.0,"timesLeft":{"file":16.7,"filament":15.0,"layer":0.1}} 2021-01-27 08:47:48,860 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:48,904 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:48,904 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[88.565,97.854,17.770],"machine":[104.351,110.794,17.770],"extr":[2037.2]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.6}]},"time":346.0,"currentLayer":89,"currentLayerTime":0.2,"extrRaw":[2038.4],"fractionPrinted":77.5,"filePosition":2073250,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":53.3,"warmUpDuration":0.0,"timesLeft":{"file":15.6,"filament":13.6,"layer":0.1}} 2021-01-27 08:47:49,906 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:49,928 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:49,928 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[92.675,108.533,18.330],"machine":[111.124,101.630,18.330],"extr":[2066.8]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":347.0,"currentLayer":92,"currentLayerTime":0.2,"extrRaw":[2068.0],"fractionPrinted":78.9,"filePosition":2112603,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":54.3,"warmUpDuration":0.0,"timesLeft":{"file":14.7,"filament":12.6,"layer":0.1}} 2021-01-27 08:47:50,930 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:50,952 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:50,952 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[89.156,100.321,18.890],"machine":[105.579,109.311,18.890],"extr":[2095.3]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.5}]},"time":348.0,"currentLayer":94,"currentLayerTime":0.3,"extrRaw":[2096.5],"fractionPrinted":80.4,"filePosition":2152346,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":55.3,"warmUpDuration":0.0,"timesLeft":{"file":13.6,"filament":12.1,"layer":0.1}} 2021-01-27 08:47:51,954 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:51,972 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:51,972 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[97.824,90.548,19.450],"machine":[92.117,106.876,19.450],"extr":[2123.4]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":2,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":349.0,"currentLayer":97,"currentLayerTime":0.3,"extrRaw":[2124.3],"fractionPrinted":81.9,"filePosition":2191495,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":56.4,"warmUpDuration":0.0,"timesLeft":{"file":12.6,"filament":11.1,"layer":0.1}} 2021-01-27 08:47:52,974 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:52,995 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:52,996 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[104.661,108.055,20.290],"machine":[100.223,91.172,20.290],"extr":[2151.5]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":3,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":350.0,"currentLayer":100,"currentLayerTime":0.3,"extrRaw":[2152.1],"fractionPrinted":83.3,"filePosition":2230607,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":57.4,"warmUpDuration":0.0,"timesLeft":{"file":11.5,"filament":9.9,"layer":0.1}} 2021-01-27 08:47:53,997 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:54,016 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:54,017 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[107.519,105.775,20.850],"machine":[98.394,90.658,20.850],"extr":[2184.7]},"speeds":{"requested":25.0,"top":25.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":3,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":351.0,"currentLayer":104,"currentLayerTime":0.3,"extrRaw":[2185.9],"fractionPrinted":84.8,"filePosition":2269969,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":58.4,"warmUpDuration":0.0,"timesLeft":{"file":10.6,"filament":7.8,"layer":0.1}} 2021-01-27 08:47:55,019 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:55,040 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:55,040 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[94.959,105.270,21.690],"machine":[106.528,95.932,21.690],"extr":[2213.0]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":352.0,"currentLayer":108,"currentLayerTime":0.1,"extrRaw":[2214.3],"fractionPrinted":86.2,"filePosition":2308492,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":59.4,"warmUpDuration":0.0,"timesLeft":{"file":9.7,"filament":7.4,"layer":0.1}} 2021-01-27 08:47:56,042 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:56,061 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:56,061 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[92.833,103.015,22.530],"machine":[107.671,98.620,22.530],"extr":[2242.7]},"speeds":{"requested":50.0,"top":50.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":353.0,"currentLayer":111,"currentLayerTime":0.3,"extrRaw":[2243.3],"fractionPrinted":87.7,"filePosition":2347413,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":60.4,"warmUpDuration":0.0,"timesLeft":{"file":8.6,"filament":6.9,"layer":0.1}} 2021-01-27 08:47:57,062 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:57,081 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:57,081 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[101.873,93.600,23.370],"machine":[107.010,98.524,23.090],"extr":[2272.4]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":354.0,"currentLayer":115,"currentLayerTime":0.3,"extrRaw":[2272.7],"fractionPrinted":89.2,"filePosition":2386411,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":61.5,"warmUpDuration":0.0,"timesLeft":{"file":7.6,"filament":5.9,"layer":0.1}} 2021-01-27 08:47:58,083 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:58,105 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:58,106 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[97.850,94.475,24.210],"machine":[94.657,102.572,24.210],"extr":[2301.4]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.5}]},"time":355.0,"currentLayer":120,"currentLayerTime":0.2,"extrRaw":[2302.8],"fractionPrinted":90.6,"filePosition":2425541,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":62.5,"warmUpDuration":0.0,"timesLeft":{"file":6.6,"filament":4.3,"layer":0.1}} 2021-01-27 08:47:59,107 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:47:59,128 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:47:59,129 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[95.088,101.876,25.330],"machine":[99.083,105.694,25.050],"extr":[2332.7]},"speeds":{"requested":50.0,"top":50.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.7,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.7,21.5],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.7},{"name":"hotend","temp":21.5}]},"time":356.0,"currentLayer":125,"currentLayerTime":0.2,"extrRaw":[2333.0],"fractionPrinted":92.1,"filePosition":2464819,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":63.5,"warmUpDuration":0.0,"timesLeft":{"file":5.5,"filament":3.5,"layer":0.1}} 2021-01-27 08:48:00,130 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:48:00,149 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:48:00,150 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[100.997,103.834,26.450],"machine":[103.288,102.867,26.450],"extr":[2363.1]},"speeds":{"requested":30.0,"top":30.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.5,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.5,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.5},{"name":"hotend","temp":21.6}]},"time":357.0,"currentLayer":130,"currentLayerTime":0.2,"extrRaw":[2364.3],"fractionPrinted":93.5,"filePosition":2503958,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":64.5,"warmUpDuration":0.0,"timesLeft":{"file":4.5,"filament":2.3,"layer":0.1}} 2021-01-27 08:48:01,152 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:48:01,171 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:48:01,171 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[97.486,98.393,27.850],"machine":[101.863,95.873,27.850],"extr":[2394.8]},"speeds":{"requested":48.3,"top":48.3},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":358.0,"currentLayer":136,"currentLayerTime":0.0,"extrRaw":[2396.1],"fractionPrinted":95.0,"filePosition":2543180,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":65.6,"warmUpDuration":0.0,"timesLeft":{"file":3.4,"filament":1.2,"layer":0.1}} 2021-01-27 08:48:02,173 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:48:02,198 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:48:02,198 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[97.676,96.545,29.250],"machine":[97.272,96.614,28.950],"extr":[2422.9]},"speeds":{"requested":50.0,"top":40.6},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":359.0,"currentLayer":141,"currentLayerTime":0.0,"extrRaw":[2423.2],"fractionPrinted":96.5,"filePosition":2582139,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":66.6,"warmUpDuration":0.0,"timesLeft":{"file":2.4,"filament":0.4,"layer":0.1}} 2021-01-27 08:48:03,199 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:48:03,218 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:48:03,218 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[95.532,101.076,30.450],"machine":[96.234,98.162,30.450],"extr":[2447.1]},"speeds":{"requested":22.6,"top":14.6},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":360.0,"currentLayer":146,"currentLayerTime":0.1,"extrRaw":[2448.4],"fractionPrinted":97.9,"filePosition":2621485,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":67.6,"warmUpDuration":0.0,"timesLeft":{"file":1.4,"filament":0.1,"layer":0.0}} 2021-01-27 08:48:04,220 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:48:04,241 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:48:04,241 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"M","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[96.339,97.994,31.950],"machine":[102.687,103.199,31.950],"extr":[2470.2]},"speeds":{"requested":22.8,"top":22.8},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":4,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":361.0,"currentLayer":151,"currentLayerTime":0.1,"extrRaw":[2470.6],"fractionPrinted":99.4,"filePosition":2661221,"firstLayerDuration":0.4,"firstLayerHeight":0.30,"printDuration":68.6,"warmUpDuration":0.0,"timesLeft":{"file":0.4,"filament":0.1,"layer":0.0}} 2021-01-27 08:48:05,242 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onCheckStatus [348]: Prusa i3-simulate | Checking status... 2021-01-27 08:48:05,261 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [367]: Prusa i3-simulate | Status received - decoding... 2021-01-27 08:48:05,261 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [369]: Prusa i3-simulate | Status: {"status":"I","coords":{"axesHomed":[1,1,1],"wpl":1,"xyz":[100.000,100.000,3.640],"machine":[100.000,100.000,3.640],"extr":[0.0]},"speeds":{"requested":0.0,"top":0.0},"currentTool":0,"params":{"atxPower":-1,"fanPercent":[0,0],"speedFactor":100.0,"extrFactors":[100.0],"babystep":0.000},"seq":5,"sensors":{"probeValue":0,"fanRPM":[-1,-1]},"temps":{"bed":{"current":21.6,"active":0.0,"standby":0.0,"state":0,"heater":0},"current":[21.6,21.6],"state":[0,2],"tools":{"active":[[0.0]],"standby":[[0.0]]},"extra":[{"name":"bed","temp":21.6},{"name":"hotend","temp":21.6}]},"time":362.0,"currentLayer":0,"currentLayerTime":0.0,"extrRaw":[2472.9],"fractionPrinted":0.0,"filePosition":0,"firstLayerDuration":0.0,"firstLayerHeight":0.30,"printDuration":0.0,"warmUpDuration":0.0,"timesLeft":{"file":0.0,"filament":0.0,"layer":0.0}} 2021-01-27 08:48:05,262 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [385]: Prusa i3-simulate | Simulation print finished 2021-01-27 08:48:05,262 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onStatusReceived [388]: Prusa i3-simulate | Sending gcode:M37 2021-01-27 08:48:05,274 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onM37Reported [406]: Prusa i3-simulate | M37 finished - let's get it's reply... 2021-01-27 08:48:05,275 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onM37Reported [408]: Prusa i3-simulate | M37 gcode reply | {"buff":251} 2021-01-27 08:48:05,287 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onReported [421]: Prusa i3-simulate | Simulation status received - decoding... 2021-01-27 08:48:05,288 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onReported [423]: Prusa i3-simulate | Reported | Simulation mode: off, move time: 3154.0 sec, other time: 0.0 sec 2021-01-27 08:48:05,290 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._cleanupRequest [446]: _cleanupRequest called 2021-01-27 08:48:05,293 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._cleanupRequest [454]: _cleanupRequest finished 2021-01-27 11:25:40,939 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin DuetRRFPlugin 2021-01-27 11:26:02,454 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [77]: Prusa i3-print | New DuetRRFOutputDevice created 2021-01-27 11:26:02,454 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [78]: Prusa i3-print | URL: http://192.168.4.22/ 2021-01-27 11:26:02,455 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [79]: Prusa i3-print | Duet password: set. 2021-01-27 11:26:02,455 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [80]: Prusa i3-print | HTTP Basic Auth user: empty. 2021-01-27 11:26:02,455 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [81]: Prusa i3-print | HTTP Basic Auth password: empty. 2021-01-27 11:26:02,455 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._cleanupRequest [446]: _cleanupRequest called 2021-01-27 11:26:02,456 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._cleanupRequest [454]: _cleanupRequest finished 2021-01-27 11:26:02,457 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [77]: Prusa i3-simulate | New DuetRRFOutputDevice created 2021-01-27 11:26:02,457 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [78]: Prusa i3-simulate | URL: http://192.168.4.22/ 2021-01-27 11:26:02,458 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [79]: Prusa i3-simulate | Duet password: set. 2021-01-27 11:26:02,458 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [80]: Prusa i3-simulate | HTTP Basic Auth user: empty. 2021-01-27 11:26:02,458 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [81]: Prusa i3-simulate | HTTP Basic Auth password: empty. 2021-01-27 11:26:02,458 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._cleanupRequest [446]: _cleanupRequest called 2021-01-27 11:26:02,459 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._cleanupRequest [454]: _cleanupRequest finished 2021-01-27 11:26:02,460 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [77]: Prusa i3-upload | New DuetRRFOutputDevice created 2021-01-27 11:26:02,460 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [78]: Prusa i3-upload | URL: http://192.168.4.22/ 2021-01-27 11:26:02,461 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [79]: Prusa i3-upload | Duet password: set. 2021-01-27 11:26:02,461 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [80]: Prusa i3-upload | HTTP Basic Auth user: empty. 2021-01-27 11:26:02,461 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [81]: Prusa i3-upload | HTTP Basic Auth password: empty. 2021-01-27 11:26:02,461 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._cleanupRequest [446]: _cleanupRequest called 2021-01-27 11:26:02,461 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._cleanupRequest [454]: _cleanupRequest finished 2021-01-27 11:39:11,047 - DEBUG - [MainThread] Toolbox.src.Toolbox._createDialog [216]: Marketplace: Creating dialog [Toolbox.qml]. 2021-01-27 11:39:11,160 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [544]: Requesting [packages] metadata from server. 2021-01-27 11:39:11,166 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [124]: No auth data to retrieve the access_token from 2021-01-27 11:39:11,169 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request 2021-01-27 11:39:11,169 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [544]: Requesting [authors] metadata from server. 2021-01-27 11:39:11,173 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [124]: No auth data to retrieve the access_token from 2021-01-27 11:39:11,177 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request 2021-01-27 11:39:11,178 - DEBUG - [MainThread] Toolbox.src.Toolbox._updateInstalledModels [270]: Found a plugin that was installed with the old plugin browser: VersionUpgrade47to48 2021-01-27 11:41:13,265 - DEBUG - [MainThread] Toolbox.src.Toolbox._update [429]: Updating package [DuetRRFPlugin]... 2021-01-27 11:41:13,265 - INFO - [MainThread] Toolbox.src.Toolbox.startDownload [556]: Attempting to download & install package from https://api.ultimaker.com/cura-packages/v1/cura/v7.4.0/packages/DuetRRFPlugin/download. 2021-01-27 11:41:13,269 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [124]: No auth data to retrieve the access_token from 2021-01-27 11:41:13,273 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request 2021-01-27 11:41:14,174 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [673]: new download progress 18655 / 212965 : 8.759655342427159% 2021-01-27 11:41:14,326 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [673]: new download progress 212965 / 212965 : 100.0% 2021-01-27 11:41:14,327 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [673]: new download progress 212965 / 212965 : 100.0% 2021-01-27 11:41:14,391 - INFO - [MainThread] Toolbox.src.Toolbox._onDownloadComplete [676]: Download complete. 2021-01-27 11:41:14,396 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [601]: Found potential package.json file '/package.json' 2021-01-27 11:41:14,401 - DEBUG - [MainThread] UM.PackageManager.getPackageLicense [629]: Found potential license file '/files/plugins/DuetRRFPlugin/LICENSE' 2021-01-27 11:41:16,273 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [601]: Found potential package.json file '/package.json' 2021-01-27 11:41:16,276 - INFO - [MainThread] UM.PackageManager.installPackage [447]: Package [DuetRRFPlugin] version [1.2.1] is scheduled to be installed. 2021-01-27 11:41:16,292 - INFO - [MainThread] UM.PackageManager._saveManagementData [259]: Package management file C:\Users\localadmin\AppData\Roaming\cura\4.8\packages.json was saved 2021-01-27 11:41:16,306 - DEBUG - [MainThread] Toolbox.src.Toolbox._updateInstalledModels [270]: Found a plugin that was installed with the old plugin browser: VersionUpgrade47to48 2021-01-27 11:41:23,101 - DEBUG - [MainThread] Toolbox.src.Toolbox._update [429]: Updating package [StartOptimiser]... 2021-01-27 11:41:23,102 - INFO - [MainThread] Toolbox.src.Toolbox.startDownload [556]: Attempting to download & install package from https://api.ultimaker.com/cura-packages/v1/cura/v7.0.0/packages/StartOptimiser/download. 2021-01-27 11:41:23,106 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [124]: No auth data to retrieve the access_token from 2021-01-27 11:41:23,110 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request 2021-01-27 11:41:23,892 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [673]: new download progress 17723 / 17723 : 100.0% 2021-01-27 11:41:23,893 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [673]: new download progress 17723 / 17723 : 100.0% 2021-01-27 11:41:23,957 - INFO - [MainThread] Toolbox.src.Toolbox._onDownloadComplete [676]: Download complete. 2021-01-27 11:41:23,962 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [601]: Found potential package.json file '/package.json' 2021-01-27 11:41:23,966 - DEBUG - [MainThread] UM.PackageManager.getPackageLicense [629]: Found potential license file '/files/plugins/StartOptimiser/LICENSE' 2021-01-27 11:41:25,474 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [601]: Found potential package.json file '/package.json' 2021-01-27 11:41:25,478 - INFO - [MainThread] UM.PackageManager.installPackage [447]: Package [StartOptimiser] version [3.5.2] is scheduled to be installed. 2021-01-27 11:41:25,495 - INFO - [MainThread] UM.PackageManager._saveManagementData [259]: Package management file C:\Users\localadmin\AppData\Roaming\cura\4.8\packages.json was saved 2021-01-27 11:41:25,507 - DEBUG - [MainThread] Toolbox.src.Toolbox._updateInstalledModels [270]: Found a plugin that was installed with the old plugin browser: VersionUpgrade47to48 2021-01-27 11:42:04,036 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [470]: Shutting down cura 2021-01-27 11:42:04,088 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [315]: Attempting to kill the engine process 2021-01-27 11:42:04,088 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [321]: Killing engine process 2021-01-27 11:42:04,092 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [324]: Engine process is killed. Received return code 1 2021-01-27 11:45:42,237 - DEBUG - [MainThread] DuetRRFPlugin.register [18]: DuetRRFPlugin version: 1.2.0 2021-01-27 11:45:42,243 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin DuetRRFPlugin 2021-01-27 11:45:45,655 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFPlugin._checkDuetRRFOutputDevices [149]: DuetRRF is not available for printer: id:Prusa i3 Factory, name:HICTOP Prusa i3 MK1 2021-01-27 11:45:58,952 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFPlugin._check_unmapped_settings [47]: called 2021-01-27 11:45:58,952 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFPlugin._check_unmapped_settings [61]: Unmapped settings found! 2021-01-27 11:45:58,952 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFPlugin._showUnmappedSettingsMessage [69]: called: dict_keys(['Prusa i3']) 2021-01-27 11:48:24,081 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFAction.saveConfig [90]: config saved 2021-01-27 11:58:50,575 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFPlugin._showUnmappedSettingsMessage [69]: called: dict_keys(['Prusa i3']) 2021-01-27 12:00:06,656 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFAction.saveConfig [90]: config saved 2021-01-27 12:01:41,572 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFAction.saveConfig [90]: config saved 2021-01-27 12:03:21,438 - DEBUG - [MainThread] Toolbox.src.Toolbox._updateInstalledModels [270]: Found a plugin that was installed with the old plugin browser: VersionUpgrade47to48 2021-01-27 12:11:41,039 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFAction.saveConfig [90]: config saved 2021-01-27 12:11:56,484 - DEBUG - [MainThread] cura.AutoSave._onTimeout [59]: Autosaving preferences, instances and profiles 2021-01-27 12:12:32,765 - DEBUG - [MainThread] cura.AutoSave._onTimeout [59]: Autosaving preferences, instances and profiles 2021-01-27 12:12:34,985 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [74]: Default machine actions added for machine definition [flashforgecreatorpro_rightextruderonly] 2021-01-27 12:12:34,997 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [194]: Extruder[flashforgecreatorpro_rightextruderonly_extruder_1 #2] added to [FlashForge Creator Pro - Right Extruder] at position [1] 2021-01-27 12:12:35,001 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [194]: Extruder[flashforgecreatorpro_rightextruderonly_extruder_0 #2] added to [FlashForge Creator Pro - Right Extruder] at position [0] 2021-01-27 12:12:35,016 - INFO - [MainThread] UM.Logger.info [122]: Initializing Active Machine... 2021-01-27 12:12:35,058 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [196]: Could not find output device with id duetrrf-print to remove 2021-01-27 12:12:35,062 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [196]: Could not find output device with id duetrrf-simulate to remove 2021-01-27 12:12:35,065 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [196]: Could not find output device with id duetrrf-upload to remove 2021-01-27 12:12:35,079 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFPlugin._checkDuetRRFOutputDevices [149]: DuetRRF is not available for printer: id:FlashForge Creator Pro - Right Extruder, name:FlashForge Creator Pro - Right Extruder 2021-01-27 12:12:35,079 - DEBUG - [MainThread] MKSWifiPlugin.MKSOutputDevicePlugin.reCheckConnections [136]: GlobalContainerStack change None 2021-01-27 12:12:35,347 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2021-01-27 12:12:35,392 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2021-01-27 12:12:35,458 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2021-01-27 12:12:35,473 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2021-01-27 12:12:35,478 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2021-01-27 12:12:35,488 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2021-01-27 12:12:35,499 - INFO - [Thread-7] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data. 2021-01-27 12:12:35,505 - DEBUG - [Thread-7] UM.Mesh.MeshData.calculateNormalsFromVertices [556]: Calculating normals took 0.0007500648498535156 seconds 2021-01-27 12:12:35,507 - DEBUG - [Thread-7] STLReader.STLReader._read [104]: Loaded a mesh with 12372 vertices 2021-01-27 12:12:35,519 - DEBUG - [MainThread] MKSWifiPlugin.MKSOutputDevice._onGlobalContainerChanged [1336]: Cooling 2021-01-27 12:12:36,170 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [155]: New error check scheduled. 2021-01-27 12:12:36,689 - DEBUG - [MainThread] cura.Machines.Models.QualityManagementModel._update [306]: Updating QualityManagementModel. 2021-01-27 12:12:36,764 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [62]: Updating QualityProfilesDropDownMenuModel. 2021-01-27 12:12:36,771 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel. 2021-01-27 12:12:38,790 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [214]: Error check finished, result = False, time = 2.6s 2021-01-27 12:12:38,851 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [58]: Default machine actions have been added for machine definition [prusa_i3], do nothing. 2021-01-27 12:12:38,855 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [189]: Extruder [prusa_i3_extruder_0 #3] has already been added to this stack [Prusa i3 Factory] 2021-01-27 12:12:38,870 - INFO - [MainThread] UM.Logger.info [122]: Initializing Active Machine... 2021-01-27 12:12:38,886 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [196]: Could not find output device with id duetrrf-print to remove 2021-01-27 12:12:38,890 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [196]: Could not find output device with id duetrrf-simulate to remove 2021-01-27 12:12:38,893 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [196]: Could not find output device with id duetrrf-upload to remove 2021-01-27 12:12:38,894 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFPlugin._checkDuetRRFOutputDevices [140]: DuetRRF is active for printer: id:Prusa i3 Factory, name:HICTOP Prusa i3 MK1 2021-01-27 12:12:38,894 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [109]: New duetrrf-print DuetRRFOutputDevice created | URL: http://192.168.4.22/ | Duet password: set | HTTP Basic Auth: user:, password: 2021-01-27 12:12:38,895 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._resetState [481]: called 2021-01-27 12:12:38,896 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [109]: New duetrrf-simulate DuetRRFOutputDevice created | URL: http://192.168.4.22/ | Duet password: set | HTTP Basic Auth: user:, password: 2021-01-27 12:12:38,897 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._resetState [481]: called 2021-01-27 12:12:38,897 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.init [109]: New duetrrf-upload DuetRRFOutputDevice created | URL: http://192.168.4.22/ | Duet password: set | HTTP Basic Auth: user:, password: 2021-01-27 12:12:38,898 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._resetState [481]: called 2021-01-27 12:15:44,494 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [205]: Filename set to: PI3_556Funnel_w_arc.gcode 2021-01-27 12:15:44,495 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._onWriteStarted [114]: 'info/send_slice_info' is turned off. 2021-01-27 12:15:44,983 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [218]: Loading gcode... 2021-01-27 12:15:45,065 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [229]: Connecting... 2021-01-27 12:15:45,098 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onUploadReady [254]: Uploading... 2021-01-27 12:15:48,598 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onUploadDone [280]: Upload done 2021-01-27 12:15:48,598 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onReadyToPrint [328]: Ready to print 2021-01-27 12:15:48,598 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onReadyToPrint [331]: Sending gcode:M32 "0:/gcodes/PI3_556Funnel_w_arc.gcode" 2021-01-27 12:15:48,630 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onPrintStarted [350]: Print started 2021-01-27 12:15:48,632 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._resetState [481]: called 2021-01-27 14:16:37,107 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [205]: Filename set to: PI3_556Funnel-inside_out.gcode 2021-01-27 14:16:37,108 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._onWriteStarted [114]: 'info/send_slice_info' is turned off. 2021-01-27 14:16:37,733 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [218]: Loading gcode... 2021-01-27 14:16:37,817 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onFilenameAccepted [229]: Connecting... 2021-01-27 14:16:37,853 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onUploadReady [254]: Uploading... 2021-01-27 14:16:42,195 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onUploadDone [280]: Upload done 2021-01-27 14:16:42,196 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onReadyToPrint [328]: Ready to print 2021-01-27 14:16:42,196 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onReadyToPrint [331]: Sending gcode:M32 "0:/gcodes/PI3_556Funnel-inside_out.gcode" 2021-01-27 14:16:42,212 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice.onPrintStarted [350]: Print started 2021-01-27 14:16:42,214 - DEBUG - [MainThread] DuetRRFPlugin.DuetRRFOutputDevice._resetState [481]: called

Kriechi / Cura-DuetRRFPlugin

can't print unless selecting another printer and then back again after update to latest plugin version from marketplace #36