search

Kulim13 / alt-f

Automatically exported from code.google.com/p/alt-f
0 stars 0 forks source link

Cannot access STATUS/LOGIN page....but, box appears to be running #148

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1.Fixed IP Addy - I enter it...browser says page cannot be found
2.I have attached a copy of the LOG for your reference.  Any thoughts or 
suggestions would be appreciated.
3.  Tried restarting...no change.  Almost like something is not loading.

What is the expected output? What do you see instead?    nothing

What Alt-F version are you using? Have you flashed it?  RC3  Flashed

What is the box hardware revision level? A1, B1 or C1? (look at the label
at the box bottom)     B1

What is your disk configuration? Standard, RAID (what level)... Standard

What operating system are you using on your computer? Using what browser?   
WIN8  using CHROME, MONZILLA and IE

Please provide any additional information below.

Original issue reported on code.google.com by jbqu...@gmail.com on 16 Aug 2013 at 6:43

Attachments:

GoogleCodeExporter commented 9 years ago 
The box is using DHCP, it received the IP 10.0.1.213 from the 10.0.1.1 router 
and configured itself OK as you can see in lines 409 and following.

Samba, and NFS, is working, you should be able access your files.

The issue is that inetd is not starting, see line 357. And it controls httpd, 
ssh, telnet, ftp and other services, so you have none of these.
This is most likely caused by a corrupted configuration file (/etc/inetd.conf).
The default file is attached -- tabs and unix aware, don't edit under MS-W.

The easiest way to recover is to reset all configuration files to default 
values, read the "About Leds and Buttons" wiki:

Recovery Actions
The back button also has two recovery actions if the "Enable Recovery" checkbox 
in Services->System->sysctrl->Configure is checked:

4.1 If you keep the back button pressed for more than ten seconds, you can 
telnet the box at port 26, as root and without password. This is a safeguard in 
case you forget the password.

4.2 As a last safeguard, if you press the back button for more that twenty 
seconds, all the settings saved in flash will be erased, and the box will do a 
controlled reboot. This is a last resort safeguard, in case you mess the box 
configuration so much that you can't do anything with it; after the reboot the 
box will behave as if no settings has ever been saved, and you have to struggle 
to find its IP (if you have a DHCP server enabled in your network, the box will 
use it).

All settings will be erased, hope that you have saved a copy in your desktop 
computer, otherwise you will have to perform a full reconfiguration.

Original comment by whoami.j...@gmail.com on 16 Aug 2013 at 11:02

Attachments:

GoogleCodeExporter commented 9 years ago 
Jose - Thanks!  I have been a user of ALT-F for several years and on 3 
different boxes.  I would totally be lost without your firmware...or, at least 
close to broke trying to invest in hardware.

Thanks a million.

Original comment by jbqu...@gmail.com on 17 Aug 2013 at 3:16

GoogleCodeExporter commented 9 years ago 
Not really an Alt-F issue (although inetd.conf got somehow corrupted)

Original comment by whoami.j...@gmail.com on 17 Aug 2013 at 1:56