Closed keramist closed 4 years ago
well, the "verbose" (or debug) log of the peer node may have shown. But likely the requested config was simply missing on that peer. You have to have similar (usually: identical) csync2 config files on all peers. Closing -- issue was 2.5 years old already.
csync2 2.0 do not work with command csync2 -vx -C xxx csync2 -vx -C xxx
centos 7.2 iptables close or open when use csync2 -vx all works with node name centos20 //centos30
//////////////////////
/etc/csync2/csync2.cfg
nossl ; group centos { host centos10; host centos20; host centos30; key /etc/csync2/csync2.key; include /home/data/wwwroot/www.antbay.com; exclude ~ .; auto younger; } ////////////////////
/etc/csync2/csync2_centos10.cfg is same above also other node
but when use csync2 -vx -C centos10 Connecting to host centos30 (PLAIN) ... Connect to 192.168.1.30:30865 (centos30). Config command failed. ERROR: Connection to remote host `centos30' failed. Host stays in dirty state. Try again later...
can you resolve it?
/etc/xinetd.d/csync2
default: on
description: csync2
service csync2 //////////////////////// { disable = no flags = REUSE IPv4 socket_type = stream wait = no user = root group = root server = /usr/sbin/csync2 server_args = -i -l
log_on_failure += USERID
}
////////////////////
i add IPv4 on flags if not it listening on ipv6 no ipv4
use rpm or compile all the same problem