search

LRuesink-WebArray / homey-matic

Homematic App for Homey
MIT License
19 stars 15 forks source link

HomematicIP HmIP-SWD doesn't connect #15

Closed reinhardjurk closed 3 years ago

reinhardjurk commented 5 years ago

Hi Timo, don't know whether you are interested in such things, but I recently got a homey and tried to connect a HmIP-SWD, but no success. Is there any log I could assess? I'm a little familiar with software... Thanks. Reinhard

twendt commented 5 years ago

Hi Reinhard, can you give some more details? Is that the first device you are connecting? Have you been able to connect it, but it doesn't work? Does the app crash? Do get error messages you would need to run the app manually using the athom-cli on your PC.

reinhardjurk commented 5 years ago

Hi Timo,

thanks for the reply, I'm using a Homematic IP Wassersensor - 151694A0 https://www.amazon.de/gp/product/B07CF567ZK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 and have a HM-CFG-LAN adapter, however, I wasn't able to connect the HomematicIP to the HM-CFG-LAN (confirmed by EQ3, doesn't work).

Meanwhile I suspect, that I need a CCU2/CCU3 to connect to HomematicIP devices, as you state in your doc.

I was just wondering, why the Homey can't connect directly to the Homematic/HomematicIP ecosystem, I mean, that's the USP they are making (having various RF technologies within their device).

Thanks, Reinhard

On Tue, Apr 16, 2019 at 8:22 AM twendt notifications@github.com wrote:

Hi Reinhard, can you give some more details? Is that the first device you are connecting? Have you been able to connect it, but it doesn't work? Does the app crash? Do get error messages you would need to run the app manually using the athom-cli on your PC.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/twendt/homey-matic/issues/15#issuecomment-483527039, or mute the thread https://github.com/notifications/unsubscribe-auth/AHIUW6FRHWHRZIQZDHXPVSTPQVWARANCNFSM4HGCPQZA .

-- Please use PGP for secure communication. PGP Public Key: here https://keyserver.pgp.com/vkd/DownloadKey.event?keyid=0x0FF5B23D6BDA0C5F PGP Fingerprint: CF65 BF41 B032 8562 8523 5EF7 0FF5 B23D 6BDA 0C5F

twendt commented 5 years ago

For Homematic IP the Homey will never be able to connect directly to the devices. There is a hardware key required. For the standard Homematic devices I tried if the Homey would receive soething via the 868MHz chicp, but it doesn't. Homey does not support all devices connected to 868MHz. I tried to record the signal from a Homematic device and it did not receive anything. Therefore it is not possible to connect directly.

If you don't want to get the CCU3 then you can also use the official module for the Raspberry Pi and use RaspberryMatic. That works just fine.

reinhardjurk commented 5 years ago

hi timo, I got myself the rapberrymatic with the ccu2 module now, does show the device when trying to add one, but then does say "no new devices". any logfiles to send ? where would I find them? thanks!

twendt commented 5 years ago

Did you get this fixed?

philippweller commented 4 years ago

I have the same issue, most recent firmwares of Homey Pro, Raspberry Matic, RedMatic, Mosquitto enabled and configured according to the WIKI. I have a Homematic IP installation with approx. 12 devices. CCU is found (IP address is shown), however, the "next" button results in no new devices. What am I doing wrong?

twendt commented 4 years ago

So you are not able to add any devices?

philippweller commented 4 years ago

Correct, it does show the CCU (but seems to have found the Hue hub IP), if I click next, the system states "no devices found"

twendt commented 4 years ago

Would you be able to add some debug nodes in the Node Red flow to see if any data is being received?