I updated from 1.1.4-AC to Geforce8a-AC (resetting EEPROM and re-calibrating everything) and printed a gcode file I printed numerous times before.
The model features several fillets with different radii. The smaller fillets with radii up to 5mm print fine. It has one fillet with a 28mm radius that came out smooth before and now is a zig-zag instead. I assume there is a change in the firmware that i didn't enable or missed to enable interpolation(?) or round movements in an arc.
This is a section of the finished print prior to updating the firmware.
I stopped the print for the same model but I think you can clearly see what I tried to describe above.
Please let me know if you need more information. I also attached my current configuration files.
I updated from 1.1.4-AC to Geforce8a-AC (resetting EEPROM and re-calibrating everything) and printed a gcode file I printed numerous times before.
The model features several fillets with different radii. The smaller fillets with radii up to 5mm print fine. It has one fillet with a 28mm radius that came out smooth before and now is a zig-zag instead. I assume there is a change in the firmware that i didn't enable or missed to enable interpolation(?) or round movements in an arc.
This is a section of the finished print prior to updating the firmware.
I stopped the print for the same model but I think you can clearly see what I tried to describe above.
Please let me know if you need more information. I also attached my current configuration files.