REPIT interrupted due to battery running out on Nook HD+ (ovation)

[Lanchon]

hi @helpme12,

this won't work unless i'm able to understand you. i can't understand your english. you'll need to write SHORT AND CORRECT SENTENCES.

what i understand:

• contrary to instructions, you didn't charge the battery before running REPIT.
• REPIT was interrupted because you ran out of battery.
• your device doesn't boot.
• you don't have the REPIT log.

in order to help you, i need you to add the following information to this issue:

• the exact REPIT version and the exact REPIT zip name that you were flashing when the issue happened.
• describe why this happened:
  • state of battery when starting REPIT.
  • was it plugged in?
  • to a charger or to a PC?
• what do you want me to help you with: a) you want to recover your device to a usable state. b) you want to recover your device AND ALSO RECOVER YOUR DATA PARTITION.
• in case you want "b) ALSO RECOVER DATA", you also need to tell me what did you do AFTER the issue:
  • did you try formats and wipes?
  • EXACTLY WHAT DID YOU DO?
  • which EXACT buttons you pressed in TWRP?
  • which commands did you run on the command line?

---

help me my nook

I worked on the standard.

The work went well. Nook HD +'s eMMC would have worked hard

However, while I was fighting the feces, the battery of 'nook hd +' was discharged. (It is assumed that the charger output is insufficient. If the brightness was set at 10% in the recovery, this work went smoothly. I am very, very regretful, self - righteous, and impeach me. )

F UCK F UCK F * UCK

There was no mother.

Maybe it happened during expansion of the / data partition.

Immediately after this happens, I only have CWM recovery after charging the battery properly.

The / system and / cache partitions are well formatted.

However, other partitions do not do anything.

I could save this phrase. "I wish I could just take an EMMC device image and use" dd "to restore the entire device.

Formatting / data I: Formatting unknown device. W: failed to mount /dev/block/platform/omap/omap_hsmmc.1/by-name/userdata (Invalid argument) Error mounting / data! Skipping format ... Done. I: Can not partition non-vfat: datamedia I: Can not partition non-vfat: auto I: Can not format unknown volume: emmc

The state of the partitions that I tried to reformat were: / Bootdata can not mount or format / Data can not mount or format

/ Cache is fine / System is fine "

I hope you do not ignore me that you do not have a LOG file.

Let's have a conversation.

[Lanchon]

btw, i speak english and spanish.

[helpme12]

You have understood it correctly.

I will not say anything strange.

Let 's talk briefly about the work from now on.

1. you understand is true.

2. I removed the REPIT log. I understood it to be meaningless. am so sorry The log is being recovered. 2.1 However, the REPIT log is generated on the SD card. 2.2 SD cards are Transcend's products and can be restored with a recovery tool. 2.3 I did not use the SD card after my 'Nook HD +' became a brick. 2.4 The probability of recovery will be high. 2.5 The log has been restored. -> Then I will tell you by comment. 2.6 Fail ;;;;; OTZ What the Hxxx

3. The REPIT version is '20161119'

4. The battery is charging to the USB of the computer. Its battery level is 37%.

5. I want to restore the device to a usable state.

6. I tried formatting and recovery. Verrygreen's noMMC version is now up and works. I miss using the built-in 'eMMC'.

kernel ' 3.0.31-green+hd@hd-succulent #1 Wed Apr 2 10:44:13 CDT 2014 ' CM ver ' ovation_11.0_02APR2014_HD_SDC_NOEMMC ' Build date ' Wed Apr 2 10:26:43 CDT 2014 ' build number ' cm_ovation-userdebug 4.4.2 KVT49L 1e391d116ea test-key SELinux ' used '

7. I first installed 'delete-backup-of-stock-rom-ovation.zip'. 7.1 Secondly, I pressed 'lanchon-repit-20161119-factory = 32M-system = 1G-cache = 32M + wipe-data = max-ovation.zip' to install. It was warm for a very long time. (0.1hour) 7.2 I went to Nook HD + to fight against feces. 7.3 Nuclear power screen was dark. He implied that he was dead.

Listen Tank you very much.

[helpme12]

Leave a comment I can see that / system partition works.

When I tried to boot, the Android operating system booted up normally. But, the encrypted error screen will appear, prompting you to press any button.

Press the button on the screen to boot into TWRP recovery. And I try to reset the factory I tried without trying.

I think this script is a stupid script. If a person using CM operating system does not know how to initialize the / data, / cache partitions, will it boot?

If you know that this error will pop up /dev/block/platform/omap/omap_hsmmc.1/by-name/userdata (Invalid argument) Error mounting / data!

The / data partition of the eMMC will evaporate (it will be damaged by software) and it will not be mounted. It will not be resolved by factory reset.

[helpme12]

Leave a comment

At present, there are a lot of tablets in 2016 that are superior in all respects than Nook HD +.

However, the 'Nook HD +' unique display and ultra low power consumption in the standby state seem to have failed to catch up with other tablets.

I LOVE OMAP 4470

I think the OMAP 4470 is a processor with immature 'big-little' technology. The Cortex M3 dual-core processor is battery friendly and good. The performance of the Cortex A9 dual-core processor is disappointing. The combination of the Cortex A15 architecture's dual-core processor and the Cortex M3 architecture would be a great OMAP 4470.

Anyway, it is hard to get a tablet with OMAP 4470, so I hope that I can find a way to recover it with affection.

There are many hardships today. Lanchon Thank you. Please work hard.

[Lanchon]

hi,

i'll try one last time...

YOU NEED TO STOP TALKING. YOU NEED TO ANSWER EXACTLY WHAT I ASK, AND NOTHING MORE.

DON'T DO ANYTHING UNLESS I TELL YOU TO DO IT !!! STOP DOING RANDOM STUFF, YOU ONLY DO WHAT I TELL YOU TO, AND NOTHING MORE !!!

do you agree to these terms?

i you break these terms I WILL STOP HELPING YOU, so please don't. my time is limited and valuable to me.

---

what do you want me to help you with? a) you want to recover your device to a usable state. b) you want to recover your device AND ALSO RECOVER YOUR DATA PARTITION.

---

information about your external sdcard:

• your external sdcard (the one that you can remove from the device) was not modified by REPIT.
• the REPIT log is never created on the external sdcard.
• i will not help you with problems that you may have with your external sdcard. if you have problems, they were NOT caused by REPIT.

[helpme12]

do you agree to these terms? -> I will agree with your proposal.

i you break these terms I WILL STOP HELPING YOU, so please don't. my time is limited and valuable to me. -> I am grateful that you have given me your time.

i you break these terms I WILL STOP HELPING YOU, so please don't. my time is limited and valuable to me. -> I'm like you. That's right.

what do you want me to help you with? a) you want to recover your device to a usable state. -> It was already available. But, I want to boot through eMMC. (I want to use 64GB SDCARD. -> My important intormation! )

b) you want to recover your device AND ALSO RECOVER YOUR DATA PARTITION. -> Yes. Well done. Please make eMMC usable. (I do not know why the / system partition is fine ...)

information about your external sdcard:

SD card information available for recovery. (You can buy new if you sell!) Partition format: MBR Capacity: 1910MB Unallocated space: 27MB Reserved space: 0MB

  (Nothing on Windows operating system) 675MB   (Nothing on the Windows operating system) 1012MB (BOOT H :) 196MB

your external sdcard (the one that you can remove from the device) was not modified by REPIT. the REPIT log is never created on the external sdcard. i will not help you with problems that you may have with your external sdcard. if you have problems, they were NOT caused by REPIT. -> REPIT is no problem.

I had to fully charge the battery before doing this. It went well. Then the battery would have run out. (USB power supply is 2.5W ...)

But, it takes too long. I think the device is stalled.   I would like REPIT to indicate the progress of the work.

YEEESS!! TANK YOU!!

[Lanchon]

i still don't understand you !!! forget the external sdcard. please don't mention it again.

you still haven't told me what you want to do.

i will help you make your device boot again. (WITHOUT THE EXTERNAL SDCARD!) but your device will be wiped: data you had on your phone before will be lost.

is this ok with you?

[helpme12]

I will reply briefly. I give up everything. If only NuK's eMMC is alive. The data stored in Nuke can be destroyed. Thank you very much.

• ata you had on your phone before will be lost. -> Fine tank you. data lost OK!

Conclusion: YES

---

Google Translator has recently replaced it with a neural network circuit. But performance is not good.

[Lanchon]

don't worry, we will recover your device.

do this:

1) download REPIT for ovation to the PC: https://www.androidfilehost.com/?fid=457095661767117147 2) rename the file to: lanchon-repit-20161119-factory=32M-system=1G-cache=32M+wipe-data=max+wipe-ovation.zip 3) boot into TWRP, go to "MOUNT" menu, click "Disable MTP" once. 4) reboot TWRP, connect to PC. 5) from the PC, run this command: adb push lanchon-repit-20161119-factory=32M-system=1G-cache=32M+wipe-data=max+wipe-ovation.zip /tmp/ 6) using TWRP, flash REPIT from /tmp

7) success?

• if success: boot android, it should work.
• if failure: obtain the REPIT log via adb from the PC, then post it here: adb pull /tmp/lanchon-repit.log

[helpme12]

Okay, let's do it.

But I think it sounds like I need a log. O,o (I tried REPIT several times ..)

Thanks for your cooperation.

[Lanchon]

did you do what i ask? yes or no? what was the result?

[helpme12]

It does not mean no! It is !! Once installed in the embedded eMMC TWRP.

12:50 -> TWRP was installed.

[Lanchon]

i don't understand.

did you follow the steps? what was the result?

[helpme12]

3. boot into TWRP, go to "MOUNT" menu, click "Disable MTP" once. -> TWRP is required to do this. But, I already have Verrygreen's CWM installed. So I installed TWRP. Https://notredame.app.box.com/s/26a4bygh9vbaw7jjq08xr5evomvaw5ww/1/3332706778 3.0.1.0 TWRP

---

17:00 I was unexpectedly vacated when I was doing my job. It is related to my survival. occupation. It is a thing to do to eat. I am sorry to have vacated my seat while helping me. (I think the translator will make a mistake. So, it is not my job to 'eat' thing.)

---

17:25 I have tried, but the problem occurs at number 4.

If you reboot after pressing 'Disable MTP', it seems that the TWRP settings are initialized. This is the log immediately after booting.

The computer displays 'null' and does not recognize Nook HD +.

'Disable MTP' was pressed. And I did a reboot. After rebooting, it says 'Activate MTP'. Ignore it and connect it to the computer. The ADB on the computer emits a message.

The computer message is like this. (We will upload soon.)

---

18:16 When I reboot, it floats like this. It will be reset every time you reboot. TWRP screen brightness, 'disable MTP options'

/ Tmp Upload everything that was on the partition. I have Notepad ++. But I can only see, I can not interpret.

tmp.zip

[Lanchon]

yes, TWRP configuration resets because /data is corrupted.

1) boot TWRP 2) press WIPE 3) press FORMAT DATA 4) type 'yes' 5) reboot TWRP

now do this: https://github.com/Lanchon/REPIT/issues/60#issuecomment-265758196

[helpme12]

I've already tried that. But because it was not, I asked you for help. By the way, I went on a business trip. I do not have a nuke right now. I do not have a 'non-secure desktop computer' device that I can personally use to import. This is also written by smartphone from the outside for security.

[helpme12]

I can not approach my nuke for two days. Do not forget me!

[Lanchon]

i wont be able to help you.

• you don't do what i ask you to do.
• you don't post the results: the TWRP or REPIT log, or a picture of the log at least.

unless you do, i can't help you any more. i'll be waiting for logs or pics.

"I've already tried that." is not the response i need.

[helpme12]

I am sorry for medium.

I'll show you the log and the screen.

21:01 The fact is this.

bionic_open_tzdata: couldn't find any tzdata when looking for localtime! bionic_open_tzdata: couldn't find any tzdata when looking for GMT! __bionic_open_tzdata: couldn't find any tzdata when looking for posixrules! Starting TWRP 3.0.1-0 on Mon Dec 12 12:06:45 2016 (pid 109) TW_NO_REBOOT_RECOVERY := true TW_NO_REBOOT_BOOTLOADER := true RECOVERY_SDCARD_ON_DATA := true I:CPU temperature file '/sys/class/thermal/thermal_zone0/temp' not found, disabling CPU temp. I:Lun file '/sys/devices/virtual/android_usb/android0/f_mass_storage/lun/file' TW_INCLUDE_CRYPTO := true I:TW_BRIGHTNESS_PATH := /sys/class/backlight/lcd-backlight/brightness I:Found brightness file at '/sys/class/backlight/lcd-backlight/brightness' I:TWFunc::Set_Brightness: Setting brightness control to 254 I:LANG: en Starting the UI...setting DRM_FORMAT_BGRA8888 and GGL_PIXEL_FORMAT_BGRA_8888 cannot find/open a drm device: No such file or directory fb0 reports (possibly inaccurate): vi.bits_per_pixel = 32 vi.red.offset = 16 .length = 8 vi.green.offset = 8 .length = 8 vi.blue.offset = 0 .length = 8 setting GGL_PIXEL_FORMAT_BGRA_8888 double buffered RECOVERY_BGRA framebuffer: 0 (1920 x 1280) Using fbdev graphics. I:TWFunc::Set_Brightness: Setting brightness control to 254 I:Loading package: splash (/twres/splash.xml) I:Load XML directly I:PageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly I:Checking resolution... I:Scaling theme width 1.000000x and height 1.066667x, offsets x: 0 y: 0 I:Loading resources... I:Loading variables... I:Loading mouse cursor... I:Loading pages... I:Loading page splash I:Switching packages (splash) => Linking mtab Renaming regular /etc/recovery.fstab -> /etc/recovery.fstab.bak Moving /etc/twrp.fstab -> /etc/recovery.fstab => Processing recovery.fstab I:Processing '/data' I:Setting up '/data' as data/media emulated storage. I:Created '/emmc' folder. I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' E:Primary block device '/dev/block/platform/omap/omap_hsmmc.1/by-name/userdata' for mount point '/data' is not present! Failed to mount '/data' (Invalid argument) I:Actual block device: '', current file system: 'f2fs' Unable to recreate /data/media folder. I:Processing '/cache' I:Processing '/system' I:Processing '/boot' I:Processing '/recovery' I:Processing '/external_sd' I:Created '/external_sd' folder. I:Backup folder set to '/data/media/TWRP/BACKUPS/3024720009774308' I:Settings storage is '/data/media' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' Updating partition details... Failed to mount '/data' (Invalid argument) I:Actual block device: '', current file system: 'f2fs' I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd bionic_open_tzdata: couldn't find any tzdata when looking for localtime! bionic_open_tzdata: couldn't find any tzdata when looking for GMT! bionic_open_tzdata: couldn't find any tzdata when looking for posixrules! bionic_open_tzdata: couldn't find any tzdata when looking for GMT! __bionic_open_tzdata: couldn't find any tzdata when looking for posixrules! WARN: volume was not unmounted cleanly. ...done I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' Unable to mount storage I:Unmounting main partitions...

Partition Logs: /data | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Symlink_Path: /data/media Symlink_Mount_Point: /emmc Primary_Block_Device: /dev/block/platform/omap/omap_hsmmc.1/by-name/userdata Length: -16384 Display_Name: Data Storage_Name: Internal Storage Backup_Path: /data Backup_Name: data Backup_Display_Name: Data Storage_Path: /data/media Current_File_System: f2fs Fstab_File_System: f2fs Backup_Method: files Mount_Flags=0x 0, Mount_Options=inline_xattr MTP_Storage_ID: 65537

/cache | /dev/block/mmcblk0p9 | Size: 31MB Used: 4MB Free: 26MB Backup Size: 4MB Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Primary_Block_Device: /dev/block/mmcblk0p9 Display_Name: Cache Storage_Name: Cache Backup_Path: /cache Backup_Name: cache Backup_Display_Name: Cache Storage_Path: /cache Current_File_System: ext4 Fstab_File_System: ext4 Backup_Method: files

/system | /dev/block/mmcblk0p8 | Size: 1007MB Used: 635MB Free: 372MB Backup Size: 635MB Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent Primary_Block_Device: /dev/block/mmcblk0p8 Display_Name: System Storage_Name: System Backup_Path: /system Backup_Name: system Backup_Display_Name: System Storage_Path: /system Current_File_System: ext4 Fstab_File_System: ext4 Backup_Method: files

/boot | /dev/block/mmcblk0p4 | Size: 16MB Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img Primary_Block_Device: /dev/block/mmcblk0p4 Display_Name: Boot Storage_Name: boot Backup_Path: /boot Backup_Name: boot Backup_Display_Name: Boot Storage_Path: /boot Current_File_System: emmc Fstab_File_System: emmc Backup_Method: dd

/recovery | /dev/block/mmcblk0p3 | Size: 15MB Flags: IsPresent Can_Flash_Img Primary_Block_Device: /dev/block/mmcblk0p3 Display_Name: Recovery Storage_Name: recovery Backup_Path: /recovery Backup_Name: recovery Backup_Display_Name: Recovery Storage_Path: /recovery Current_File_System: emmc Fstab_File_System: emmc Backup_Method: dd

/external_sd | /dev/block/mmcblk1p1 | Size: 61487MB Used: 15375MB Free: 46111MB Backup Size: 15375MB Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage Primary_Block_Device: /dev/block/mmcblk1p1 Alternate_Block_Device: /dev/block/mmcblk1 Display_Name: Micro SDcard Storage_Name: Micro SDcard Backup_Path: /external_sd Backup_Name: external_sd Backup_Display_Name: Micro SDcard Storage_Path: /external_sd Current_File_System: exfat Fstab_File_System: vfat Backup_Method: files MTP_Storage_ID: 65538

I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' Failed to mount '/data' (Invalid argument) I:Actual block device: '', current file system: 'f2fs' I:Unable to mount /data/media during GUI startup. I:Loading package: TWRP (/twres/ui.xml) I:Load XML directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/uk.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/tr.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sv.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sl.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sk.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/ru.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/pt_BR.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/pl.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/nl.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/it.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/hu.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/fr.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/es.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/de.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/cz.xml' directly I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly parsing languageFile parsing languageFile done I:PageManager::LoadFileToBuffer loading filename: '/twres/ui.xml' directly I:Checking resolution... I:Scaling theme width 1.000000x and height 1.066667x, offsets x: 0 y: 0 I:Loading resources... I:Failed to load image from indeterminate013, error -1 I:Loading variables... I:Loading mouse cursor... I:Loading pages... I:Including file: /twres/landscape.xml... I:PageManager::LoadFileToBuffer loading filename: '/twres/landscape.xml' directly I:Loading resources... I:Loading variables... I:Loading mouse cursor... I:Loading pages... I:Loading page main I:Loading page main2 I:Loading page install I:Unable to open '/sdcard' I:Unable to open '/sdcard' I:Unable to open '/sdcard' I:Loading page flash_confirm I:Loading page flash_zip I:Loading page flash_done I:Loading page flashimage_confirm I:Loading page clear_vars I:Loading page confirm_action I:Loading page action_page I:Loading page singleaction_page I:Loading page action_complete I:Loading page filecheck I:Loading page rebootcheck I:Loading page wipe I:Loading page advancedwipe I:Loading page formatdata I:Loading page formatdata_confirm I:Loading page checkpartitionlist I:Loading page partitionoptions I:Loading page refreshfilesystem I:Loading page selectfilesystem I:Loading page backup I:Loading page backupname1 I:Loading page backupname2 I:Loading page backupencryption I:Loading page backupencryption2 I:Loading page checkbackuppassword I:Loading page backup_run I:Loading page restore I:Unable to open '/data/media/TWRP/BACKUPS/3024720009774308' I:Loading page restore_read I:Loading page restore_decrypt I:Loading page try_restore_decrypt I:Loading page restore_select I:Loading page renamebackup I:Loading page restore_run I:Loading page mount I:Loading page usb_mount I:Loading page usb_umount I:Loading page system_readonly_check I:Loading page reboot I:Loading page system_readonly I:Loading page settings I:Loading page settings_timezone I:Loading page settings_screen I:Loading page settings_vibration I:Loading page settings_language I:Loading page advanced I:Loading page partsdcardsel I:Loading page partsdcardcheck I:Loading page partsdcard I:Loading page htcdumlock I:Loading page lock I:Loading page filemanagerlist I:Loading page filemanageroptions I:Loading page choosedestinationfolder I:Loading page filemanagerrenamefile I:Loading page filemanagerrenamefolder I:Loading page filemanagerchmod I:Loading page filemanagerconfirm I:Loading page filemanageraction I:Loading page decrypt I:Loading page decrypt_pattern I:Loading page trydecrypt I:Loading page terminalcommand I:Loading page sideload I:Loading page fixcontexts I:Loading page installsu I:Loading page slideout I:Loading page select_storage I:Loading page select_language I:Set page: 'clear_vars' I:Set page: 'main2' I:Switching packages (TWRP) SELinux contexts loaded from /file_contexts Full SELinux support is present. I:Not using /misc, not defined in fstab. I:Not using /misc, not defined in fstab. Startup Commands: ro.bq.gpu_to_cpu_unsupported=1 ro.cm.build.version.plat.rev=0 ro.cm.build.version.plat.sdk=5 ro.cm.device=ovation ro.cm.display.version=13.0-20160402-UNOFFICIAL-ovation ro.cm.version=13.0-20160402-UNOFFICIAL-ovation ro.cm.releasetype=UNOFFICIAL ro.nf.level=512 ro.nf.profile=2 ro.sf.hwrotation=270 ro.sf.lcd_density=260 ro.com.google.clientidbase=android-google ro.com.google.networklocation=1 ro.com.google.locationfeatures=1 ro.com.android.dateformat=MM-dd-yyyy ro.com.android.dataroaming=false ro.com.android.wifi-watchlist=GoogleGuest ro.cwm.forbid_format=/bootloader,/xloader,/factory,/rom ro.ksm.default=1 ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html ro.boot.console=ttyO0 ro.boot.selinux=permissive ro.boot.hardware=ovation ro.boot.serialno=3024720009774308 ro.boot.bootloader=U-Boot_1.1.4 ro.twrp.boot=1 ro.twrp.version=3.0.1-0 ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1 ro.wifi.channels= ro.allow.mock.location=1 ro.board.platform=omap4 ro.build.id=MHC19J ro.build.date=Sat Apr 2 15:30:37 EDT 2016 ro.build.date.utc=1459625437 ro.build.host=alchemy ro.build.tags=test-keys ro.build.type=eng ro.build.user=dmaces ro.build.flavor=cm_ovation-eng ro.build.display.id=cm_ovation-eng 6.0.1 MHC19J 160402 test-keys ro.build.product=ovation ro.build.selinux=1 ro.build.version.sdk=23 ro.build.version.base_os= ro.build.version.release=6.0.1 ro.build.version.codename=REL ro.build.version.incremental=160402 ro.build.version.preview_sdk=0 ro.build.version.all_codenames=REL ro.build.version.security_patch=2016-03-01 ro.build.description=cm_ovation-eng 6.0.1 MHC19J 160402 test-keys ro.build.fingerprint=Android/cm_ovation/ovation:6.0.1/MHC19J/160402:eng/test-keys ro.build.characteristics=tablet ro.config.alarm_alert=Helium.ogg ro.config.notification_sound=Argon.ogg ro.crypto.state=unencrypted ro.dalvik.vm.native.bridge=0 ro.kernel.android.checkjni=1 ro.secure=0 ro.zygote=zygote32 ro.carrier=wifi-only ro.cmlegal.url=https://cyngn.com/legal/privacy-policy ro.product.cpu.abi=armeabi-v7a ro.product.cpu.abi2=armeabi ro.product.cpu.abilist=armeabi-v7a,armeabi ro.product.cpu.abilist32=armeabi-v7a,armeabi ro.product.cpu.abilist64= ro.product.name=cm_ovation ro.product.board=ovation ro.product.brand=Android ro.product.model=BN NookHD+ ro.product.device=ovation ro.product.locale=en-US ro.product.manufacturer=Barnes & Noble ro.baseband=unknown ro.bootmode=unknown ro.hardware=ovation ro.opengles.version=131072 ro.revision=0 ro.serialno=3024720009774308 ro.bootimage.build.date=Sat Apr 2 15:30:58 EDT 2016 ro.bootimage.build.date.utc=1459625458 ro.bootimage.build.fingerprint=Android/cm_ovation/ovation:6.0.1/MHC19J/160402:eng/test-keys ro.bootloader=U-Boot_1.1.4 ro.debuggable=1 ro.modversion=13.0-20160402-UNOFFICIAL-ovation ro.rommanager.developerid=cyanogenmod ro.recovery_id=0x3f4cbdbe8a58116eb32d98aebf344a0e5de78d03000000000000000000000000 ro.setupwizard.enterprise_mode=1 ro.additionalmounts=/mnt/emmc;/mnt/usbdisk ro.disableWifiApFirmwareReload=true com.ti.omap_enhancement=true net.bt.name=Android net.change=net.bt.name usb.vendor=2080 usb.product.adb=0005 usb.product.mtpadb=0005 init.svc.adbd=running init.svc.healthd=running init.svc.ueventd=running init.svc.recovery=running init.svc.set_permissive=stopped omap.audio.mic.sub=AMic1 omap.audio.mic.main=AMic0 omap.audio.power=PingPong omap.enhancement=true twrp.crash_counter=0 twrp.action_complete=0 debug.hwui.render_dirty_regions=false debug.atrace.tags.enableflags=0 media.sf.omx-plugin=libffmpeg_omx.so media.sf.extractor-plugin=libffmpeg_extractor.so media.stagefright.cache-params=18432/20480/15 config.disable_atlas=true dalvik.vm.isa.arm.variant=cortex-a9 dalvik.vm.isa.arm.features=default dalvik.vm.usejit=true dalvik.vm.heapsize=256m dalvik.vm.lockprof.threshold=500 dalvik.vm.dex2oat-Xms=64m dalvik.vm.dex2oat-Xmx=512m dalvik.vm.heapmaxfree=8m dalvik.vm.heapminfree=512k dalvik.vm.dex2oat-flags=--no-watch-dog dalvik.vm.heapstartsize=8m dalvik.vm.dex2oat-filter=verify-at-runtime dalvik.vm.heapgrowthlimit=128m dalvik.vm.stack-trace-file=/data/anr/traces.txt dalvik.vm.image-dex2oat-Xms=64m dalvik.vm.image-dex2oat-Xmx=64m dalvik.vm.image-dex2oat-filter=verify-at-runtime dalvik.vm.heaptargetutilization=0.75 persist.hwc.mirroring.transform=2 persist.sys.dun.override=0 persist.sys.usb.config=mtp,adb persist.sys.dalvik.vm.lib.2=libart.so persist.sys.root_access=3 service.adb.root=1 keyguard.no_require_sim=true telephony.sms.send=false

Running boot script... mkdir: can't create directory '/bootdata': File exists mount: mounting /dev/block/mmcblk0p6 on /bootdata failed: Device or resource busy 4+0 records in 4+0 records out 4 bytes (4B) copied, 0.000153 seconds, 25.5KB/s 1088+0 records in 1088+0 records out 1088 bytes (1.1KB) copied, 0.005341 seconds, 198.9KB/s I:/sbin/postrecoveryboot.sh process ended with RC=0 Done. I:Copying file /cache/recovery/log to /cache/recovery/last_log tw_get_context failed to get selinux context I:Failed to get default contexts and file mode for storage files. I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' Unable to mount /data/media/TWRP/.twrps I:Attempt to load settings from settings file... I:InfoManager file '/data/media/TWRP/.twrps' not found. I:Backup folder set to '/data/media/TWRP/BACKUPS/3024720009774308' I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab I:Version number saved to '/cache/recovery/.version' I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd bionic_open_tzdata: couldn't find any tzdata when looking for localtime! bionic_open_tzdata: couldn't find any tzdata when looking for GMT! bionic_open_tzdata: couldn't find any tzdata when looking for posixrules! bionic_open_tzdata: couldn't find any tzdata when looking for GMT! bionic_open_tzdata: couldn't find any tzdata when looking for posixrules! bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0! __bionic_open_tzdata: couldn't find any tzdata when looking for posixrules! I:TWFunc::Set_Brightness: Setting brightness control to 254 I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly parsing languageFile parsing languageFile done I:Translating partition display names I:Backup folder set to '/data/media/TWRP/BACKUPS/3024720009774308' I:Enabling MTP during startup I:Starting MTP Starting MTP I:sending message to add 65538 '/external_sd' 'Micro SDCard' I:Message sent, add storage ID: 65538 MTP Enabled I:Switching packages (TWRP) I:Set page: 'system_readonly' created new mtpserver object MtpServer::run fd: 18 mtppipe add storage 65538 '/external_sd' MtpStorage id: 65538 path: /external_sd I:Is_Mounted: Unable to find partition for path '/vendor' I:operation_start: 'Toggle System Mount' I:operation_end - status=1 I:Set page: 'main' I:Set page: 'clear_vars' I:Set page: 'main2' I:Set page: 'main' I:Set page: 'clear_vars' I:Set page: 'main2' I:Switching packages (TWRP) I:Set page: 'main' I:Set page: 'clear_vars' I:Set page: 'main2' I:Set page: 'reboot' I:Set page: 'main' I:Set page: 'clear_vars' I:Set page: 'main2' I:Set page: 'settings' I:Set page: 'settings_screen' I:TWFunc::Set_Brightness: Setting brightness control to 114 I:Set page: 'main' I:Set page: 'clear_vars' I:Set page: 'main2' I:Set page: 'advanced' I:Set page: 'main' I:Set page: 'clear_vars' I:Set page: 'main2' I:Set page: 'wipe' I:Set page: 'formatdata' I:Set page: 'formatdata_confirm' I:Set page: 'action_page' I:operation_start: 'Format' Unable to open '' to wipe crypto key Formatting Data using mkfs.f2fs... Error: Device not specified

Usage: mkfs.f2fs [options] device [sectors] [options]: -a heap-based allocation [default:1] -d debug level [default:0] -e [extension list] e.g. "mp3,gif,mov" -l label -o overprovision ratio [default:5] -O set feature -q quiet mode -s # of segments per section [default:1] -z # of sections per zone [default:1] -t 0: nodiscard, 1: discard [default:1] -r reserved_bytes [default:0] (use only device_size-reserved_bytes for filesystem) sectors: number of sectors. [default: determined by device size] mkfs.f2fs -t 0 -r 16384 process ended with ERROR: 1 Unable to wipe Data. Unable to format to remove encryption. I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' Updating partition details... Failed to mount '/data' (Invalid argument) I:Actual block device: '', current file system: 'f2fs' ...done I:Unable to mount '/data' I:Actual block device: '', current file system: 'f2fs' Unable to mount storage I:Set page: 'action_complete' I:operation_end - status=1 I:Set page: 'clear_vars' I:Set page: 'main2' I:Set page: 'advanced' I:Set page: 'confirm_action' I:Set page: 'action_page' I:operation_start: 'Copy Log' Failed to mount '/data' (Invalid argument) I:Actual block device: '', current file system: 'f2fs' I:Copying file /tmp/recovery.log to /data/media/recovery.log Copied recovery log to /data/media. I:Set page: 'action_complete' I:operation_end - status=0 I:Set page: 'clear_vars' I:Set page: 'advanced' I:Set page: 'filemanagerlist' I:Set page: 'filemanageroptions' I:Set page: 'choosedestinationfolder' I:Set page: 'filemanagerconfirm' I:Set page: 'filemanageraction' I:operation_start: 'Command' I:Running command: 'cp "/tmp/recovery.log" "/external_sd"'

[Lanchon]

ok, thanks. we'll do a different thing now.

1) download REPIT for ovation to the PC: https://www.androidfilehost.com/?fid=457095661767117147 2) rename the file to: lanchon-repit-20161119-factory=32M-system=1G-cache=32M+wipe-data=max+wipe-ovation.zip 3) copy the file to an external sdcard that works. 4) boot into TWRP. do not connect ovation to PC at any moment. 5) flash REPIT from the sdcard. it will probably fail. 6) in TWRP, go to MOUNT and unmount everything there. 7) flash REPIT again from /tmp

8) success?

• if success: boot android, it should work.
• if failure: obtain the REPIT log or take a picture of the TWRP log and post here

[helpme12]

I just read it. We will run and report the result.

People, eMMC is restored!

13:29 Wow! succeded. I'm glad this is. So I tried to record the logs of this process and leave it as a record. I took the screenshot hard, but I was so glad I forgot. forget Mounting SD card ;; (Feeling missing a historic monument?)

The result was a great success !!! EMMC works! (New partitioning ?!)

Thank you for your help so far.

How about this one? People who abandoned the use of built-in eMMC due to the "TRIM bug" at CM11. Could it be done in this way?

Many Nook HD + users I know gave up using the embedded eMMC. I'm living with an external SD card. (And it was forgotten and forgotten ..)

It is a breakthrough when it comes to reviving the dead eMMC. Nook HD + has a long and long life. (I feel the sign that the eMMC component will be running until it does not work.)

[Lanchon]

glad it worked! now you need to change the /data partition to F2FS if you want (it is currently ext4).

this has nothing to do with brickbug emmc. and yes, brickbug (assuming it is really brickbug) can be fixed by following a procedure similar to this one. for all i know it has never been attempted.

[Lanchon]

and yes lol, your nook has the new partition layout now.

[helpme12]

I'm glad that I made my Nuke. I hope that everything you do will flow smoothly.

ps. The / system partition grows to 1G and is comfortable.