search

LapsTimeOFF / DigiFlag_F1MV

Adding a DigiFlag functionality to MultiViewer For F1
MIT License
19 stars 2 forks source link

Pixoo64 Configuration #285

Open AlexWHughes opened 1 week ago

AlexWHughes commented 1 week ago

Hello,

Is there any documentation for the setup for the Pixoo64? I assume it just needs to be on the correct wifi network but I can't seem to get it to work.

image

TheBaconCat commented 1 week ago

So I found the manual for Pixoo 64 https://fcc.report/FCC-ID/A8IPIXOO64/5371128.pdf as far as I know you need to download the smartphone app to upgrade the Pixoo firmware and connect it to WiFi. It needs to be on the same WiFi network as Multiviewer. You can go to this URL in your browser on your home network where your Pixoo is and it should list your Pixoo device. This is the same URL that I’m polling for Pixoo 64 devices https://app.divoom-gz.com/Device/ReturnSameLANDevice So try downloading the app and updating the Pixoo firmware. Rebooting the Pixoo a few times and let me know if that works or if you have any other issues.

AlexWHughes commented 3 days ago

My issue turns out to be Digiflag latching onto the IP address of the VPN I am using. Is there any way to get it to force it to use a certain IP/interface?