search

LarsK1 / hass_solvis_control

Solvis Control Integration for HomeAssistant
GNU General Public License v3.0
1 stars 2 forks source link

Home Assistant failed to connect #6

Closed ThomasWollstadt closed 5 days ago

ThomasWollstadt commented 6 days ago

Latest version of solvis control is installed. HomeAssistant-Version latest is installed running on a PI4 Solvis VC3 is connected via LAN and communicates properly with Solvis portal. It is connected via a switch with my Fritzbox. IP Address and port 502 is set properly in the configuration of Solvis Control

Nevertheless I get a failed to connect after reboot of heating system or Homeassistant every time.

Any idea where to search for the root cause?

LarsK1 commented 5 days ago

Hi @ThomasWollstadt , did you enable the modbus interface one the Solvis in the "Installateur"-Menu?

ThomasWollstadt commented 5 days ago

… yes…

Interestingly: I switched from LAN to WLAN connection on the SOLVIS side yesterday and now it works without any other adaptations… not sure how to inteprete this…

Von: Lars Kusch @.> Gesendet: Donnerstag, 27. Juni 2024 10:03 An: LarsK1/hass_solvis_control @.> Cc: ThomasWollstadt @.>; Mention @.> Betreff: Re: [LarsK1/hass_solvis_control] Home Assistant failed to connect (Issue #6)

Hi @ThomasWollstadt https://github.com/ThomasWollstadt , did you enable the modbus interface one the Solvis in the "Installateur"-Menu?

— Reply to this email directly, view it on GitHub https://github.com/LarsK1/hass_solvis_control/issues/6#issuecomment-2194048652 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AZFRA2GU6R6CB6QAQ44KZ53ZJPBKVAVCNFSM6AAAAABJ5L2LA2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOJUGA2DQNRVGI . You are receiving this because you were mentioned.Message ID: @.***>

LarsK1 commented 5 days ago

Hi, never experienced such an issue. I'm personally using my Solvis over LAN without any troubles...