Closed SloMusti closed 8 years ago
Smoothieware is definately the 'default'. Second best is Grbl Third is marlin TinyG status is 'coming soon'
Smoothieware is the only one the does laser power as a variable function of acceleration, makes for much better cuts and engraves.
In all cases gcode generation is working perfectly fine. Serial sending is the WIP. On 23 May 2016 19:10, "SloMusti" notifications@github.com wrote:
I am in the process of testing LaserWeb and am choosing the controller firmware had hardware, however there do not seem to be any clear directions yet.
Based on tickets support for Marlin/Smoothieware/Grbl is under development and thus would be a good idea to nicely display what id the default, most operational path.
Happy to prepare this, just ping your replies which firmware should be the best choice.
— You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub https://github.com/openhardwarecoza/LaserWeb2/issues/56
I am in the process of testing LaserWeb and am choosing the controller firmware had hardware, however there do not seem to be any clear directions yet.
Based on tickets support for Marlin/Smoothieware/Grbl is under development and thus would be a good idea to nicely display what id the default, most operational path.
Happy to prepare this, just ping your replies which firmware should be the best choice.