motors off button

[adeebshihadeh]

personally, I use M18/M84 a lot. would be convenient to have it above the jog buttons. I can add it myself, but would other people find this useful? maybe it can be a single macro button that exists on the jogging panel so it can be configured for laser fire or whatever

[maudette01432]

I thing taking a page from usgs would make a lot of people happy. There is a pane of several customizable macro buttons which will send what ever command(s) the user has programmed for the macro.

[adeebshihadeh]

I know about the macro panel, but it would be convenient to have macro button 0 for example appear in the jogging pane. I frequently use motors off to move the carriage out of the way or for rough positioning.

[cojarbi]

We already have a macro panel. Why dont you place that motor off on the end gcode?

On Sat, Nov 19, 2016 at 4:26 PM, quillford notifications@github.com wrote:

I know about the macro panel, but it would be convenient to have macro button 0 for example appear in the jogging pane. I frequently use motors off to move the carriage out of the way or for rough positioning.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/LaserWeb/LaserWeb3/issues/185#issuecomment-261740692, or mute the thread https://github.com/notifications/unsubscribe-auth/APrsFkIBIJ1D3Jd0gNOM_wb6cNa5DX27ks5q_2mRgaJpZM4K3WiV .

Ariel Yahni

[ghost]

Well, the limitation a while back was 'please don't add anything more to the jog panel, since @FabCreator wants to run off a 1024x800 7" Pi Monitor, and we dont want to have a scrollbar for their users.

Since then, i talked them into not using Pi+7"tft. They are now running on a Pipo X9S - lookup the specs of the screen and just test that we still fit nice and finger touchable sizes in their resolution (dev tools - view port) and you are welcome to add some more!

On Nov 19, 2016 11:44 PM, "Ariel Yahni" notifications@github.com wrote:

We already have a macro panel. Why dont you place that motor off on the end gcode?

On Sat, Nov 19, 2016 at 4:26 PM, quillford notifications@github.com wrote:

I know about the macro panel, but it would be convenient to have macro button 0 for example appear in the jogging pane. I frequently use motors off to move the carriage out of the way or for rough positioning.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <https://github.com/LaserWeb/LaserWeb3/issues/185#issuecomment-261740692 , or mute the thread https://github.com/notifications/unsubscribe-auth/APrsFkIBIJ1D3Jd0gNOM_ wb6cNa5DX27ks5q_2mRgaJpZM4K3WiV .

Ariel Yahni

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/LaserWeb/LaserWeb3/issues/185#issuecomment-261741684, or mute the thread https://github.com/notifications/unsubscribe-auth/AHVr25JxASOK4gcHr9hBknM1dOb_QB-Vks5q_23PgaJpZM4K3WiV .

[ghost]

Oh just one more thing, but please do a check if we are connected to Smoothie before showing such a hard coded button, since Grbl doesnt have a Motors off command (only motor off after delay)

On Sun, Nov 20, 2016 at 7:49 AM, Peter van der Walt (Gmail) < peter.plaaswerf@gmail.com> wrote:

Well, the limitation a while back was 'please don't add anything more to the jog panel, since @FabCreator wants to run off a 1024x800 7" Pi Monitor, and we dont want to have a scrollbar for their users.

Since then, i talked them into not using Pi+7"tft. They are now running on a Pipo X9S - lookup the specs of the screen and just test that we still fit nice and finger touchable sizes in their resolution (dev tools - view port) and you are welcome to add some more!

On Nov 19, 2016 11:44 PM, "Ariel Yahni" notifications@github.com wrote:

We already have a macro panel. Why dont you place that motor off on the end gcode?

On Sat, Nov 19, 2016 at 4:26 PM, quillford notifications@github.com wrote:

I know about the macro panel, but it would be convenient to have macro button 0 for example appear in the jogging pane. I frequently use motors off to move the carriage out of the way or for rough positioning.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/LaserWeb/LaserWeb3/issues/185#issuecomme nt-261740692, or mute the thread https://github.com/notifications/unsubscribe-auth/ APrsFkIBIJ1D3Jd0gNOM_wb6cNa5DX27ks5q_2mRgaJpZM4K3WiV .

Ariel Yahni

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/LaserWeb/LaserWeb3/issues/185#issuecomment-261741684, or mute the thread https://github.com/notifications/unsubscribe-auth/AHVr25JxASOK4gcHr9hBknM1dOb_QB-Vks5q_23PgaJpZM4K3WiV .

[adeebshihadeh]

then maybe it should be configurable so macro 0 from the macro panel appears on the jog panel instead of a fixed motors off, especially since it seems motors off isn't too widely used

[FabCreator]

For smoothie users moving the motors is not a good idea too fast and you will damage the drivers. I would recommend avoiding it and jogging.

Perhaps the jogging options could pop up like the number pad does as an option?

Sent from my Samsung device

-------- Original message -------- From: quillford notifications@github.com Date: 20/11/2016 5:10 p.m. (GMT+01:00) To: LaserWeb/LaserWeb3 LaserWeb3@noreply.github.com Cc: Info info@Fabcreator.com, Mention mention@noreply.github.com Subject: Re: [LaserWeb/LaserWeb3] motors off button (#185)

then maybe it should be configurable so macro 0 from the macro panel appears on the jog panel instead of a fixed motors off, especially since it seems motors off isn't too widely used

You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/LaserWeb/LaserWeb3/issues/185#issuecomment-261787119, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ASVw1dU1Oa0_4MBkbAtkVytVYCHt_iwRks5rAHDUgaJpZM4K3WiV.

[ghost]

Done!