Closed mennodegraaf closed 7 months ago
I don't know if its important, but just checked whats under the cover and it's ESP-WROOM-32 not D1 Mini.
Upload the board photo
Please note that this firmware is still being tested. 1.4.0-rc.5.zip
Thanks! Everything works now!
This issue is stale because it has been open 15 days with no activity. Remove stale label or comment or this will be closed in 5 days.
This issue was closed because it has been stalled for 5 days with no activity.
Great project! I would love to make it run on my Diyless Thermostat, which uses a Wemos D1 Mini ESP32. After adjusting the
platformio.ini
file to usewemos_d1_mini32
it compiles. I have adjusted the pin mapping to useOT_IN_PIN_DEFAULT=21
,OT_OUT_PIN_DEFAULT=22
andSENSOR_INDOOR_PIN_DEFAULT=18
, which should be correct as I have tested it with https://github.com/diyless/esp32-wifi-thermostat.I noticed some issues however:
USE_TELNET=1
does not work at all (exception after startup)Can you point me in some direction what I can try to get it to work?