OpenTherm Settings inputs rollback to default after refresh

[Quiss]

Hello @Laxilef, Thank you for the work, everything is just great.

I encountered a problem where after entering the settings - they are saved on the device, but reset in the settings panel to default values while other parameters remain unchanged. For example, in GPIO I use 7 / out 8, but after saving - I see 13 and 15 again, but the adjustment starts working!

This also applies to switches. It would be convenient to "modify" instead of entering again. Thank you!

Version: | 1.4.2 Env: nodemcu_8266 Date: Jun 15 2024 03:05:50 Core/SDK: 3.1.2

[Laxilef]

Hi @Quiss, thanks! GPIO 7 and 8 is not valid for nodemcu 8266, see pinout:

Invalid values are not saved. Most likely you meant D7 and D8, which are equal to GPIO 13 and 15?

[Quiss]

@Laxilef why? (I don't understand microcontrollers)

When specifying 7 8 everything works, but as I said above - it resets to the default value

SmartTherm usage 7 and 8 https://drive.google.com/file/d/1Wv_77LTP45Vh3wCga1CM9oiGG6yuRg94/view

[Laxilef]

Hi @Quiss,

See pinout D7 = GPIO13 D8 = GPIO15

When specifying 7 8 everything works, but as I said above - it resets to the default value

They are not reset, they are not saved because the values 7 and 8 are not valid for your board. Use values 13 and 15.

[Quiss]

@Laxilef I'll have to learn this, Thanks!)