Auto load gcode viewer

[shiftylilbastrd]

Description

It would be great is the gcode viewer would automatically load. Currently I have to switch to the Gcode tab so octoprint analyzes the file and loads the preview and then I'm able to switch to multicamview to be able to monitor the print. A minor inconvenience but I want to saw it used to do it automatically before the 1.9 update.

Describe your problem? What is the problem? Can you recreate it? Did you try disabling plugins? Did you remember to update the subject?**

---

Plugins installed

• UI Customizer[uicustomizer] v0.1.9.4
• Timelapse Purger[timelapsepurger] v0.1.4
• Cura Thumbnails[UltimakerFormatPackage] v1.0.2
• Simple Emergency Stop[simpleemergencystop] v1.0.5
• PrintTimeGenius Plugin[PrintTimeGenius] v2.3.0
• Obico for OctoPrint[obico] v2.3.9
• Navbar Temperature Plugin[navbartemp] v0.15
• MultiCamView[multicamview] v0.1.0
• MultiCam[multicam] v0.3.1
• Exclude Region[excluderegion] v0.3.2
• DisplayLayerProgress Plugin[DisplayLayerProgress] v1.28.0

UI Customizer settings

• addWebCamZoom: true
• centerTopIcons: true
• compactMenu: true
• compressTempControls: true
• disableTermInactive: false
• filesFullHeight: true
• fixedFooter: false
• fixedHeader: true
• fluidLayout: true
• gcodeFullWidth: false
• hideGraphBackground: true
• hideMainCam: false
• mainTabsCustomize: true
• navbarplugintempfix: false
• responsiveMode: true
• saveAccordions: true
• themeLocal: false

Software versions

• OctoPrint 1.9.0
• Python 3.9.2
• OctoPi 1.0.0

Browser

• Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/114.0.0.0 Safari/537.36

[LazeMSS]

Will look into it.

[LazeMSS]

My guess is something breaks because of one the multicam plugins - try disabling them and run again

[shiftylilbastrd]

Disabled both and no change. Still doesn't analyze the file unless I click on the Viewer tab.

On Tue, Jun 13, 2023 at 8:43 AM LazeMSS @.***> wrote:

My guess is something breaks because of one the multicam plugins - try disabling them and run again

— Reply to this email directly, view it on GitHub https://github.com/LazeMSS/OctoPrint-UICustomizer/issues/294#issuecomment-1589573970, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJLKC76P3UQX76QRZ2M6PRTXLCDCPANCNFSM6AAAAAAY6SZPTA . You are receiving this because you authored the thread.Message ID: @.***>

[loroff]

bonjours j ai exactement le meme probleme octoprint 1.9.1 python 3.9.2 octopi 1.0.0 alors que cela marché tres bien avec la precedente version d octoprint je n utilise que le plug in "classic webcam"

[7s3]

I had this working, and all of a sudden it broke. Now I have to manually go to the "GCode Viewer" Main Tab in order for it to start rendering in the GCode Viewer module that I have in one of the 3 Layout columns.

[LazeMSS]

Should be fixed in: https://github.com/LazeMSS/OctoPrint-UICustomizer/releases/tag/0.1.9.8

Please check and reopen if not working - thank you...

[7s3]

Should be fixed in: https://github.com/LazeMSS/OctoPrint-UICustomizer/releases/tag/0.1.9.8

Please check and reopen if not working - thank you...

Thanks, I think it's working correctly now in 0.1.9.8

[loroff]

merci beaucoup cela refonctionne correctement

[LazeMSS]

agréable à entendre - bonne soirée