Add modus Power/Hybrid/Green

[BliXem1]

Dear developer, can you add these modus so we can change it directly via Home Assistant?

[mtarjoianu]

Dear BliXem1, Yes, we are working to add this feature. It will be available for setting EM and 3EM devices that control the charger 1p7k. The work is in progress, I'll announce you here when the release is made.

[Redrex85]

Dear developer , in this update you will also add the energy meter entity : Active power W - Current A - Voltage V? so as to use it also as a simple shelly EM

Tnx

[mtarjoianu]

Dear Redrex85, Yes. We will add these entities for the EM device.

[mtarjoianu]

Dear BliXem1 and Redrex85,

A new release (v.1.1.10-beta) is up now and it supports Lektrico's EM device. The entities for EM are:

• LB mode
• Current
• Voltage
• Power
• Breaker current
• PF
• Reboot

[Redrex85]

I installed version 1.1.10, but I still see only 20 entities, looking for the ones you told me among the entities, they are not there

[mtarjoianu]

Dear Redrex85, My colleagues confirmed me that you have a Lektrico EM device that controls your charger. Please try to add it and you'll see there the EM's entities. Also please update to Home Assistant 2023.3.3.

[mtarjoianu]

Dear BliXem1 and Redrex85,

A new release (v.1.1.10-beta) is up now and it supports Lektrico's EM device. The entities for EM are:

• LB mode
• Current
• Voltage
• Power
• Breaker current
• PF
• Reboot

Please update to Home Assistant 2023.3.3.

[Redrex85]

Good evening, come fare per add it and you'll see there the EM's entities. i have version 2023.3.3, do i need to use shelly integration? I went from 1.1.9 to 1.1.10 directly from HACS, do I have to delete and reinstall again?

[BliXem1]

I think you need to add the EM like you add the charger via HACS, check the IP address and then add it? This is only a guess :)

[mtarjoianu]

Yes, you add the EM device like you added the Lektrico charger.

There are now 2 ways:

1. with zeroconf discovery Go to Settings -> Devices&Services If the device is discovered, you will see it there like this:

2. manually, like you added the charger: Obtain the ip of your EM device Go to Settings -> Devices&Services -> Add Integration button -> search for Lektrico -> select Lektrico integration -> add friendly name and the ip.

[mtarjoianu]

I went from 1.1.9 to 1.1.10 directly from HACS, do I have to delete and reinstall again? No

[Redrex85]

thanks I realized that in the component custom folder there are 2 lektrico folders

/config/custom_components/lektrico/ /config/custom_components/lektrico_custom/

before the update it was only called lektrico, now there is custom nearby, which one should I delete? in case tonight I delete everything and do it again

[mtarjoianu]

I think you should delete /config/custom_components/lektrico/

[BigBugz]

Hi, I tried to add the EM Monitor and it's not working for me (v 1.1). message : Unable to connect. The IP Address is correct and connected to the same wifi ssid than the EV Charger.

Also, i have a second issue. The Instant Power of the EV charger is setup in kW in HA but the value is in W (ex. 2500kW instead 2.5kW or 2500 W).

[Tatanu]

@BigBugz , @Redrex85 you must use the EM provided by the manufacturer that integrates with the original application. it doesn't work with shelly em.

@BigBugz It is fixed in v.1.1.9-beta

[BigBugz]

@Tatanu I use the module sold by lektrico and working properly with the lektrico charger with 3 modes :)

thanks for the second issue 👍

[Tatanu]

@BigBugz then instal the latest v1.1.10 -beta and both problem will be solved.

[BigBugz]

@Tatanu I confirm, all its ok now :) thanks for your work👌

[Tatanu]

we thank @mtarjoianu for his work 👍

[BliXem1]

This works like a charm! Within two weeks the installation is done so I can use my charger to test it out. For now fixed.

[Redrex85]

perfect everything working, I had to delete the lektrico folder. but now the sensors are 19 and not 20 and with different names