LesserSpottedAustralianSquirel
commented
2 years ago Pg 4, b_drive_frame_upper.stl: I have it on pg 38.
Correct, updated as directed.
Pg 5, z_rear_extrusionbracket_right.stl: I have it on pg 55.
Correct, updated as directed.
Pg 8-10: The XY Joints & Carriage are weird. They have a line drawing exactly like the photo on pg 98. Not sure why, but I'd ignore it and have the following notations:
I have to agree with you. Not happy.
xy_joint_left_lower_MGN12.stl on pg 106 xy_joint_left_upper_MGN12.stl on pg 105 xy_joint_right_lower_MGN12.stl on pg 102 xy_joint_right_upper_MGN12.stl on pg 101 x_carriage_frame_left.stl on pg 100 x_carriage_frame_right.stl on pg 100
Done as requested. Reordered.
Pg 10, last item: Yep that looks like the thermal fuse, I'd delete this entry.
Thanks for confirmation. I am going to leave it in as I did 3 table scans of the stls before I realised that it was a thermal fuse. If I made the mistake. Then I would like to save someone else the frustration. But you are right it should not be here.
Pg 14, blower_housing_rear.stl: I have it on pg 166 (it's the fans that are colored blue, but the part makes its first appearance here)
Correct, updated as directed. Also Reordered.
Pg 14, hotend_fan_mount.stl: Same as above. I have it on pg 166.
Correct, updated as directed. Also Reordered.
Pg 15, cable_frame_anchor_x6.stl: I think this is the wrong item. Should be deck_support_3mm.stl or deck_support_4mm.stl from the Panels directory.
I originally had the parts you describe in this block. Can you confirm this correction? Ie have you built this far? I am on page 100 and yet to have the privilege. Action: Added the parts you describe with a question to whether it is correct. I am going to leave this as a question but I am 99% sure you are right. Also will need to find where this part does come up.
Thanks
Pg 16, raspberrypi_bracket.stl: I have it on pg 189. (typo?)
Correct, updated as directed.
Pg 17, lrs_psu_bracket_x2.stl: This is the wrong item. Should be rs_25_psu_bracket.stl.
I am looking at them side by side and I have to say "how can you tell?" On the other hand it does say, quite clearly, RS25-5 psu Differed to obviously greater intelligence. Updated as directed.
Pg 17: Missing the parts from ElectronicsBay/Controller_Board for pg 193.
Differed to obviously greater intelligence. updated as directed.
Pg 17: The springloaded part isn't printed.
I am going to leave it in as I did 5 table scans of the stls before I considered it was not a STL. If I made the mistake. Then I would like to save someone else the frustration. But you are right it should not be here.
Pg 17: raspberrypi_bracket.stl: Not needed, this is just installing the Pi. Part was seen earlier. Delete entry.
Done
Pg 17: Pg 202 reference: Yes, this is installing the controller board. Delete entry.
Differed to obviously greater intelligence. updated as directed.
Pg 19, LED screen pg 234. Not a printed part. Delete entry.
The part was [a]_mini12864_case_front_insert.stl and I found it. Added to doco Thanks for bringing this to my attention.
Pg 19, "round thing" is the encoder knob that comes with the 12864 screen. Delete entry (though it's sad to lose the joke).
Item deleted. No really it's gone. Honestly. You can trust me. No need to check.
Pg 21: missing entry for side_skirt_b_250.stl seen on pg 242.
Wrong directory to. STLs/Skirt changed to STLs/Skirt/250 Yep. Now I understand. Thanks. Change added
Pg 21: missing entry for bottom_panel_clip_4mm_x8.stl seen on pg 250.
Sorry, can't see it. File not found. the only entry with "bottom_panel" is ./Panels/bottom_panel_clip_x4.stl I am going with that. Please advise if I have it right. Entry added. Possibly the wrong one.
Pg 23, latch_x2.stl: Duplicate entry, delete.
Done. Grin.
Paris In The The spring
Extra: Any idea where [a]_y_endstop_housing.stl goes from STLs/Gantry/AB_Drive_Units. Can't find in manual. Looks important. Page number from official manual would be great.
Extra: added you to the credits. - thanks for your help.
claudermilk
Found discrepancies in the PDF: Pg 4, b_drive_frame_upper.stl: I have it on pg 38. Pg 5, z_rear_extrusionbracket_right.stl: I have it on pg 55. Pg 8-10: The XY Joints & Carriage are weird. They have a line drawing exactly like the photo on pg 98. Not sure why, but I'd ignore it and have the following notations: xy_joint_left_lower_MGN12.stl on pg 106 xy_joint_left_upper_MGN12.stl on pg 105 xy_joint_right_lower_MGN12.stl on pg 102 xy_joint_right_upper_MGN12.stl on pg 101 x_carriage_frame_left.stl on pg 100 x_carriage_frame_right.stl on pg 100 Pg 10, last item: Yep that looks like the thermal fuse, I'd delete this entry. Pg 14, blower_housing_rear.stl: I have it on pg 166 (it's the fans that are colored blue, but the part makes its first appearance here) Pg 14, hotend_fan_mount.stl: Same as above. I have it on pg 166. Pg 15, cable_frame_anchor_x6.stl: I think this is the wrong item. Should be deck_support_3mm.stl or deck_support_4mm.stl from the Panels directory. Pg 16, raspberrypi_bracket.stl: I have it on pg 189. (typo?) Pg 17, lrs_psu_bracket_x2.stl: This is the wrong item. Should be rs_25_psu_bracket.stl. Pg 17: Missing the parts from ElectronicsBay/Controller_Board for pg 193. Pg 17: The springloaded part isn't printed. Pg 17: raspberrypi_bracket.stl: Not needed, this is just installing the Pi. Part was seen earlier. Delete entry. Pg 17: Pg 202 reference: Yes, this is installing the controller board. Delete entry. Pg 19, LED screen pg 234. Not a printed part. Delete entry. Pg 19, "round thing" is the encoder knob that comes with the 12864 screen. Delete entry (though it's sad to lose the joke). Pg 21: missing entry for side_skirt_b_250.stl seen on pg 242. Pg 21: missing entry for bottom_panel_clip_4mm_x8.stl seen on pg 250. Pg 23, latch_x2.stl: Duplicate entry, delete.