Open xcancerberox opened 4 years ago
Change C6, C57-C59, C75, C110, C111, C116, C124 from "0.1uF" to "0.1uF, 10V".
So we can use same component as C5, C10-C13, C21, C30, C33-C35, C37, C42, C62, C71, C72, C91, C92, C102, C103, C137
For C40, C41, C49 (10nF, 2KV) I only found
https://eu.mouser.com/ProductDetail/Yageo/CC1812JKX7RDBB103?qs=tS%2FAHvPQ%2F55AosBJ0y7d0A%3D%3D
We can change the 2kV to a more common value >500V
For C18, C27, C43, that are defined as Nichicon_6.6x7.7 a taller replacement will be used:
https://www.digikey.com/product-detail/en/nichicon/UCM1A471MCL1GS/493-14524-6-ND/5800270
Inductors L2-L5, L8 part number lead me to https://www.datasheets360.com/part/detail/swpa6045s6r8mt/-8277091879156552518/
With thous characteristics I found:
https://www.digikey.com/product-detail/en/abracon-llc/ASPI-6045S-6R8M-T/535-13046-6-ND/5413867
This is ok?
Leftover from #53:
There are some components that are not defined at all and we need to ask to the designer.
2G_WLAN1, 5G_WLAN1, P4_1000, STATUS1 -> 3mm/GREEN
P3_100, P4_100, PWR1 -> 3mm/RED
5G_WLAN0, P3_1000, USB_LED1 -> 3mm/BLUE
D3, D4, D6-D11 -> BS05C
EARTH1 -> M4
P1-P8 -> 3R420L
S2 -> push_switch_SH
SIM_CARD_CON_6MICRO0 ->SIM_Card
T1-> QT48A03
U12 -> USB_HUB_FE1.1S
V1-> BC301N-D
In the original BOM this components are "domestic / made in china":
S2 -> push_switch_SH
SIM_CARD_CON_6MICRO0 ->SIM_Card
EARTH1
All Leds
The BOM is not fully defined.
We will copy the components that are defined in the eagle design and define thous that are not.