Closed pilnikov closed 6 years ago
I apologize for my delay. Below I will reply to your question. The display model is: 2.4" ST7789V LCD Button keys: pin 37 pin 38 pin39 Of course, the pin map has been placed in readme.md Again apologize for my negligence. hope this helps. best wishes
I would have values the info here that you will need to pull-down Pin0 for flashing. Schematic list '[1]: GPIO0' and could also mention 'Boot'/'Flash'
Publish please the type (controller) of the display & the schematic diagram (pinout) of its connection to the ESP. And also the ports to which the buttons are connected. thanks