search

LintangWisesa / RobotDyn_UnoWiFi_Favoriot

A simple IoT experiment, using a RobotDyn Uno+WiFi board to monitor MQ-2 & DHT22 sensor, via Favoriot IoT platform.
https://www.youtube.com/watch?v=sfttFMhgwxA
10 stars 5 forks source link

DIP Switch #1

Open riskiadi opened 5 years ago

riskiadi commented 5 years ago

what is your DIP switch settings for this project?

JohnBerd commented 5 years ago

I am interested by this too!

gtgunarathna commented 5 years ago

please answer

riskiadi commented 5 years ago

Hei guys. if you want communicate UNO with ESP (retrieve value from sensor then send sensor data through ESP) you can use "HARDWARE SERIAL COMMUNICATION", just play with your DIP SWITCH. ESP[5,6,7] , UNO[3,4].

gtgunarathna commented 5 years ago

i can't see any data reads from analog pins, i'm running 5,6 ON

CptAdventure commented 1 year ago

This is another example of someone who thinks they are helping by posting a project, but then only gives half of the solution or answers. This leaves people frustrated that you really think your helping......your not!

anerathil commented 9 months ago

what is your DIP switch settings for this project?

also interested

tehniq3 commented 6 months ago

is not clear for me.. you upload the sketch just in ESP8266 ? how read the state of digital pin D2 and analog pin A0 connected to ATMega328? not enough info .. clear not just with switches....

CptAdventure commented 6 months ago

can not understand ....poor english

On Thu, Apr 4, 2024 at 2:44 AM Nicu FLORICA (niq_ro) < @.***> wrote:

is not clear for me.. you upload the sketch just in ESP8266 ? how control digital pin D2 and A0 connected to ATMega328? not enough info ..

— Reply to this email directly, view it on GitHub https://github.com/LintangWisesa/RobotDyn_UnoWiFi_Favoriot/issues/1#issuecomment-2036562253, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOZVTZDFAIRZTHKQMMWMCN3Y3UHH5AVCNFSM4GGV3LAKU5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TEMBTGY2TMMRSGUZQ . You are receiving this because you commented.Message ID: @.***>

tehniq3 commented 6 months ago

you post a sketch just for ESP8266.. but in sketch you added D2 and A0 ... that pins are electrical connected just at ATMega328, as in schematic (photo).. so, how ESP8266 receive the info from ATMega ? please check also https://www.instructables.com/UNO-R3-WIFI-ESP8266-CH340G-Arduino-and-WIFI-a-Vers/ and also schemtic from https://www.avrfreaks.net/sfc/servlet.shepherd/document/download/0693l00000VJNomAAH