Debian 12 Lintian Errors

[jethornton]

You can't always use the out of date Debian version of LinuxCNC. I built master using my instructions https://gnipsel.com/linuxcnc/debian-12-emc.html When building a deb on Debian 12 I had these Lintian issues.

Now running lintian linuxcnc_2.9.0~pre0_amd64.changes ...
E: linuxcnc source: duplicate-globbing-patterns 2 (lines 214 214 214) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns GPL (lines 214 214 214) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns License: (lines 214 214 214) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns Version (lines 214 214 214) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns src/emc/linuxcnc.h (lines 214 344) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns src/hal/hal_lib.c (lines 214 339) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns src/hal/hal_priv.h (lines 214 339) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns src/libnml/nml/* (lines 362 374) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns the (lines 384 384) [debian/copyright]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/bldc.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/lineardeltakins.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/maxkins.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/pentakins.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/plasmac.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/rosekins.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/rotarydeltakins.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/rotatekins.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/scorbot-kins.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/siggen.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/tpmod.so]
E: linuxcnc-uspace: library-not-linked-against-libc [usr/lib/linuxcnc/modules/tripodkins.so]
E: linuxcnc source: source-is-missing [configs/sim/craftsman/screens/gcodes.htm]
E: linuxcnc source: source-is-missing [configs/sim/craftsman/screens/mcodes.htm]
E: linuxcnc source: source-is-missing [share/qtvcp/screens/woodpecker/images/QTvcp Widgets.html]
E: linuxcnc source: source-is-missing [share/qtvcp/screens/woodpecker/images/QTvcp Widgets_files/blank.html]
W: linuxcnc source: debian-rules-uses-unnecessary-dh-argument dh ... --parallel [debian/rules:39]
W: linuxcnc source: debian-watch-file-in-native-package [debian/watch]
W: linuxcnc-doc-en: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-documentation.desktop]
W: linuxcnc-doc-en: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-gettingstarted.desktop]
W: linuxcnc-doc-en: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-integratorinfo.desktop]
W: linuxcnc-doc-en: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-manualpages.desktop]
W: linuxcnc-doc-es: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-documentation_es.desktop]
W: linuxcnc-doc-es: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-gcoderef_es.desktop]
W: linuxcnc-doc-es: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-gettingstarted_es.desktop]
W: linuxcnc-doc-fr: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-gcoderef_fr.desktop]
W: linuxcnc-doc-fr: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-gettingstarted_fr.desktop]
W: linuxcnc-doc-fr: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-halmanual_fr.desktop]
W: linuxcnc-doc-fr: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-integratormanual_fr.desktop]
W: linuxcnc-doc-fr: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-usermanual_fr.desktop]
W: linuxcnc-doc-zh-cn: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-gettingstarted_zh_CN.desktop]
W: linuxcnc-uspace: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-gcoderef.desktop]
W: linuxcnc-uspace: desktop-command-not-in-package xdg-open [usr/share/applications/linuxcnc-gcoderef_vi.desktop]
W: linuxcnc-uspace: elevated-privileges 4755 root/root [usr/bin/linuxcnc_module_helper]
W: linuxcnc-uspace: elevated-privileges 4755 root/root [usr/bin/rtapi_app]
W: linuxcnc-uspace: executable-not-elf-or-script [usr/lib/python3/dist-packages/qtvcp/lib/mdi_text.py]
W: linuxcnc-uspace: executable-not-elf-or-script [usr/lib/tcltk/linuxcnc/bin/cbutton.tcl]
W: linuxcnc-uspace: executable-not-elf-or-script [usr/share/doc/linuxcnc/examples/sample-configs/sim/craftsman/easygui.py]
W: linuxcnc-uspace: groff-message 19: can't open '../man/images/toggle.ps': No such file or directory [usr/share/man/man9/toggle.9.gz:1]
W: linuxcnc-uspace: groff-message 28: can't open '../man/images/toggle2nist.ps': No such file or directory [usr/share/man/man9/toggle2nist.9.gz:1]
W: linuxcnc-uspace: lacks-unversioned-link-to-shared-library example: usr/lib/libpyplugin.so [usr/lib/libpyplugin.so.0]
W: linuxcnc source: mismatched-override debian-rules-uses-unnecessary-dh-argument dh ... --parallel (line 32) [debian/source/lintian-overrides:5]
W: linuxcnc-doc-en: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-documentation.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-en:2]
W: linuxcnc-doc-en: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-gettingstarted.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-en:3]
W: linuxcnc-doc-en: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-integratorinfo.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-en:4]
W: linuxcnc-doc-en: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-manualpages.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-en:5]
W: linuxcnc-doc-es: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-documentation_es.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-es:1]
W: linuxcnc-doc-es: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-gcoderef_es.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-es:3]
W: linuxcnc-doc-es: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-gettingstarted_es.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-es:2]
W: linuxcnc-doc-fr: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-gcoderef_fr.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-fr:2]
W: linuxcnc-doc-fr: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-gettingstarted_fr.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-fr:3]
W: linuxcnc-doc-fr: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-halmanual_fr.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-fr:4]
W: linuxcnc-doc-fr: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-integratormanual_fr.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-fr:5]
W: linuxcnc-doc-fr: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-usermanual_fr.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-fr:6]
W: linuxcnc-doc-zh-cn: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-gettingstarted_zh_CN.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-doc-zh-cn:1]
W: linuxcnc-uspace: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-gcoderef.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-uspace:13]
W: linuxcnc-uspace: mismatched-override desktop-command-not-in-package usr/share/applications/linuxcnc-gcoderef_vi.desktop xdg-open [usr/share/lintian/overrides/linuxcnc-uspace:12]
W: linuxcnc-uspace: mismatched-override elevated-privileges usr/bin/linuxcnc_module_helper 4755 root/root [usr/share/lintian/overrides/linuxcnc-uspace:8]
W: linuxcnc-uspace: mismatched-override elevated-privileges usr/bin/rtapi_app 4755 root/root [usr/share/lintian/overrides/linuxcnc-uspace:9]
W: linuxcnc-uspace: mismatched-override groff-message usr/share/man/man9/toggle.9.gz (line 1) 17: can't open '../man/images/toggle.ps': No such file or directory [usr/share/lintian/overrides/linuxcnc-uspace:19]
W: linuxcnc-uspace: mismatched-override groff-message usr/share/man/man9/toggle2nist.9.gz (line 1) 26: can't open '../man/images/toggle2nist.ps': No such file or directory [usr/share/lintian/overrides/linuxcnc-uspace:20]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/bldc.so [usr/share/lintian/overrides/linuxcnc-uspace:23]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/lineardeltakins.so [usr/share/lintian/overrides/linuxcnc-uspace:24]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/maxkins.so [usr/share/lintian/overrides/linuxcnc-uspace:25]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/pentakins.so [usr/share/lintian/overrides/linuxcnc-uspace:26]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/plasmac.so [usr/share/lintian/overrides/linuxcnc-uspace:27]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/rosekins.so [usr/share/lintian/overrides/linuxcnc-uspace:28]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/rotarydeltakins.so [usr/share/lintian/overrides/linuxcnc-uspace:29]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/rotatekins.so [usr/share/lintian/overrides/linuxcnc-uspace:30]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/scorbot-kins.so [usr/share/lintian/overrides/linuxcnc-uspace:31]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/siggen.so [usr/share/lintian/overrides/linuxcnc-uspace:32]
W: linuxcnc-uspace: mismatched-override library-not-linked-against-libc usr/lib/linuxcnc/modules/tripodkins.so [usr/share/lintian/overrides/linuxcnc-uspace:33]
W: linuxcnc source: missing-debian-source-format
W: linuxcnc-uspace: no-manual-page [usr/bin/melfagui]
W: linuxcnc-uspace: no-manual-page [usr/bin/millturngui]
W: linuxcnc-uspace: no-manual-page [usr/bin/qtplasmac_gcode]
W: linuxcnc-uspace: no-manual-page [usr/bin/tool_mmap_read]
W: linuxcnc-uspace: no-manual-page [usr/bin/tool_watch]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/boss_plc.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/charge_pump.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/corexykins.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/counter.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/debounce.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/encoder.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/encoder_ratio.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hal_gm.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hm2_7i43.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hm2_7i90.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hm2_pci.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hm2_test.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/homecomp.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/homemod.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/matrix_kb.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/mesa_7i65.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/modmath.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/multiswitch.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/mux_generic.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/pid.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/pwmgen.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/sampler.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/scope_rt.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/serport.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/sim_encoder.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/stepgen.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/streamer.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/supply.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/thc.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/thcud.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/threads.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/tpcomp.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/watchdog.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/weighted_sum.so]
W: linuxcnc source: superfluous-file-pattern BSD [debian/copyright:384]
W: linuxcnc source: superfluous-file-pattern Widgets_files/asciidoc.js [debian/copyright:355]
W: linuxcnc source: superfluous-file-pattern code [debian/copyright:384]
W: linuxcnc source: superfluous-file-pattern is [debian/copyright:384]
W: linuxcnc source: superfluous-file-pattern lib/python/gladevcp/iconview.py: [debian/copyright:384]
W: linuxcnc source: superfluous-file-pattern license [debian/copyright:384]
W: linuxcnc source: superfluous-file-pattern original [debian/copyright:384]
W: linuxcnc source: superfluous-file-pattern qtvcp/screens/woodpecker/images/QTvcp [debian/copyright:355]
W: linuxcnc source: superfluous-file-pattern share/qtvcp/images/widgets/writer/icons [debian/copyright:409]
W: linuxcnc source: superfluous-file-pattern src/emc/canterp/canterp.cc:* [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/emc/sai/driver.cc:* [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/emc/sai/saicanon.cc:* [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/hal/classicladder/README.txt [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtai_rtapi.c [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtai_ulapi.c [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi_common.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi_list.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi_proc.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi_vsnprintf.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern under [debian/copyright:384]
W: linuxcnc source: upstream-metadata-in-native-source [debian/upstream/metadata]
N: 0 hints overridden; 31 unused overrides
Finished running lintian.

[petterreinholdtsen]

Here is the latest list of lintian messages:

E: linuxcnc source: duplicate-globbing-patterns src/emc/linuxcnc.h (lines 214 344) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns src/hal/hal_lib.c (lines 214 339) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns src/hal/hal_priv.h (lines 214 339) [debian/copyright]
E: linuxcnc source: duplicate-globbing-patterns src/libnml/nml/* (lines 362 374) [debian/copyright]
E: linuxcnc-uspace: package-installs-python-pycache-dir [usr/share/qtvcp/screens/qtplasmac/__pycache__/]
E: linuxcnc source: source-is-missing [configs/sim/craftsman/screens/gcodes.htm]
E: linuxcnc source: source-is-missing [configs/sim/craftsman/screens/mcodes.htm]
E: linuxcnc source: source-is-missing [share/qtvcp/screens/woodpecker/images/QTvcp Widgets.html]
E: linuxcnc source: source-is-missing [share/qtvcp/screens/woodpecker/images/QTvcp Widgets_files/blank.html]
W: linuxcnc source: debian-watch-file-in-native-package [debian/watch]
W: linuxcnc-uspace: executable-not-elf-or-script [usr/lib/python3/dist-packages/qtvcp/lib/mdi_text.py]
W: linuxcnc-uspace: executable-not-elf-or-script [usr/lib/tcltk/linuxcnc/bin/cbutton.tcl]
W: linuxcnc-uspace: executable-not-elf-or-script [usr/lib/tcltk/linuxcnc/linuxcnc.tcl]
W: linuxcnc-uspace: lacks-unversioned-link-to-shared-library example: usr/lib/libpyplugin.so [usr/lib/libpyplugin.so.0]
W: linuxcnc source: missing-debian-source-format
W: linuxcnc-uspace: no-manual-page [usr/bin/melfagui]
W: linuxcnc-uspace: no-manual-page [usr/bin/millturngui]
W: linuxcnc-uspace: no-manual-page [usr/bin/qtplasmac_gcode]
W: linuxcnc-uspace: no-manual-page [usr/bin/tool_mmap_read]
W: linuxcnc-uspace: no-manual-page [usr/bin/tool_watch]
W: linuxcnc source: odd-historical-debian-changelog-version 2.9.0~pre0+git20220402.2500863908-4 (for native) [debian/changelog:7]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/boss_plc.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/charge_pump.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/corexykins.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/counter.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/debounce.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/encoder.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/encoder_ratio.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hal_gm.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hm2_7i43.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hm2_7i90.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hm2_pci.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/hm2_test.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/homecomp.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/homemod.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/matrix_kb.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/mesa_7i65.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/modmath.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/multiswitch.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/mux_generic.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/pid.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/pwmgen.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/sampler.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/scope_rt.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/serport.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/sim_encoder.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/stepgen.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/streamer.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/supply.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/thc.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/thcud.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/threads.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/watchdog.so]
W: linuxcnc-uspace: shared-library-lacks-prerequisites [usr/lib/linuxcnc/modules/weighted_sum.so]
W: linuxcnc source: superfluous-file-pattern "share/qtvcp/screens/woodpecker/images/QTvcp [debian/copyright:355]
W: linuxcnc source: superfluous-file-pattern Widgets_files/asciidoc.js" [debian/copyright:355]
W: linuxcnc source: superfluous-file-pattern share/qtvcp/images/widgets/writer/icons [debian/copyright:409]
W: linuxcnc source: superfluous-file-pattern src/hal/classicladder/README.txt [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/hal/utils/halcmd_commands.c [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtai_rtapi.c [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtai_ulapi.c [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi_common.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi_list.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi_proc.h [debian/copyright:214]
W: linuxcnc source: superfluous-file-pattern src/rtapi/rtapi_vsnprintf.h [debian/copyright:214]
W: linuxcnc source: upstream-metadata-in-native-source [debian/upstream/metadata]