LmHandlerInit causing some current leakage till the first tx

[AD-NCD]

Hello, i was making power profiling and i found there is always a leakage before first Transmission "doesn't matter it's a join or anything else". After first transmission everything turns to be fine. I am using LmHandlerInit to init mac, i found that after setting public network param leakage occurs which seems to be writing on radio and radio doesn't go to sleep after it when i removed this part issue solved. . Here's the code line 328:

mibReq.Type = MIB_PUBLIC_NETWORK;
mibReq.Param.EnablePublicNetwork = LmHandlerParams->PublicNetworkEnable;
LoRaMacMibSetRequestConfirm(&mibReq);

I think the solution is to sleep radio at the end of LmHandlerInit. 2 images attached for the power profiling. Power seems to be higher than usual because i am having some extra hw connected

[AD-NCD]

After tracing. In loramac.c file line 4686: case MIB_PUBLIC_NETWORK: { Nvm.MacGroup2.PublicNetwork = mibSet->Param.EnablePublicNetwork; Radio.SetPublicNetwork( Nvm.MacGroup2.PublicNetwork ); break; } setting this command in radio wakes it up so we should be sleeping radio after this Same on Restoring NVM line 3512: // The public/private network flag may change upon reloading MacGroup2 // from NVM and we thus need to synchronize the radio. The same function // is invoked in LoRaMacInitialization. Radio.SetPublicNetwork( Nvm.MacGroup2.PublicNetwork ); If i added Radio.sleep() Everything works fine

[lff5]

I have the same issue with Restoring from NVM. Radio.sleep() must be called afterwards.

[AD-NCD]

Still not solved!