Closed Zahnpasta83 closed 1 year ago
No one who can help me? 😟
This is normal and needed for system stability as of Victron. Unfortunately I cannot find the question in the Victron Community anymore. If you want further details ask this question there and post the link here, so I can link it in the FAQ.
Okay, and why does the system fully ignore the set „max charging current“ ?
Because system stability has a higher priority.
If you want further details ask this question there and post the link here, so I can link it in the FAQ.
Describe the problem
I have got a 3 phase Multiplus 2 5000 and a 2 batterie 18S system.
As soon as the set voltage is reached and DC feed in is active, the power constantly fluctuates between approx. 300w charging and then 300w discharging again. the battery never goes to rest, is that normal? There is a constant fluctuation between charging and discharging.
When the set voltage is more like 0.1 - 0.2V above the set MAX_CELL_VOLTAGE, Victrons start to discharge ramping up to almost full power depending on voltage above the set value.
Driver version
latest
Venus OS device type
Raspberry Pi
Venus OS version
latest
BMS type
Smart BMS (LLT, JBD, Overkill Solar)
Cell count
2 x 18
Connection type
Serial USB adapter to RS485
Config file
Relevant log output