CSI Camera does not work when manually compiling buildroot

[fredsco]

When I manually compile the build root no /dev/video0 is available and no files in /userdata/ is present. When using the images from google drive the camera does work. Do I need to enable something in kernel menu config?

E.g do I need to enable something in build root config?:

./build.sh buildrootconfig

[luckfox-eng33]

Except for Ultra/Ultra W, all other boards are turned on by default, and you don’t need to do anything else.

[fredsco]

@luckfox-eng33 Hi I recompiled again and the camera is simply not working. If I use the img files from the google drive link everything works fine. I have the pico Mini B.

I think during compilation the drivers are not loaded.

How Can I ensure it is on in the luck fox-pico SDK?

[luckfox-eng33]

If you can adb or ssh into the luckfox pico system, you can try luckfox config (the quick configuration tool we provide) and turn on CSI For details on how to use it, you can check the wiki

[fredsco]

@luckfox-eng33 Thanks for the tip. Since I have successfully setup wlan0 I indeed can SSH into the device. I have done so and ran the Luckfox-config command.

I have enabled CSI but I still do not see any files in /userdata/

The files such as video0 etc. do show up when I use the image files from the google drive link....

[luckfox-eng33]

1. Please provide complete system log information, such as "dmesg"
2. Based on your questions on other issues, I reasonably doubt whether you have used root permissions and modified other files at will. I suggest you re-pull the sdk and recompile to test it.

[fredsco]

I have done the following things:

1. clone the pico SDK.
2. set USB to host mode using the following instructions: https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-USB
3. add export RK_ENABLE_WIFI=y to BoardConfig-SD_CARD-Buildroot-RV1103_Luckfox_Pico_Mini_B-IPC.mk
4. run sudo ./build.sh buildrootconfig select right board, SD Card, build root -> and enable wpa_supplicant , dhcpcd, dnsmasq
5. lastly run sudo ./build.sh
6. output/image is generated and I use the SoC toolkit to create SD card.

Dmesg output:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.110 (root@kitty) (arm-rockchip830-linux-uclibcgnueabihf-gcc (crosstool-NG 1.24.0) 8.3.0, GNU ld (crosstool-NG 1.24.0) 2.32) #1 Tue Sep 3 22:24:34 CEST 2024
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Luckfox Pico Mini B
[    0.000000] Memory policy: Data cache writeback
[    0.000000] cma: Reserved 24576 KiB at 0x02800000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: user_debug=31 storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normal  rootwait earlycon=uart8250,mmio32,0xff4c0000 console=ttyFIQ0 snd_soc_core.prealloc_buffer_size_kbytes=16 coherent_pool=0 root=/dev/mmcblk1p7 rootfstype=ext4 rk_dma_heap_cma=24M blkdevparts=mmcblk1:32K(env),512K@32K(idblock),256K(uboot),32M(boot),512M(oem),256M(userdata),6G(rootfs),-(media)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 33000K/65536K available (4236K kernel code, 367K rwdata, 1980K rodata, 196K init, 149K bss, 7960K reserved, 24576K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x1fb/0x360 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000017] Switching to timer-based delay loop, resolution 41ns
[    0.000409] Console: colour dummy device 80x30
[    0.000455] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.000473] pid_max: default: 4096 minimum: 301
[    0.000642] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000655] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001269] CPU: Testing write buffer coherency: ok
[    0.001782] Setting up static identity map for 0x81c0 - 0x81f8
[    0.002185] devtmpfs: initialized
[    0.008906] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.009097] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.009122] futex hash table entries: 16 (order: -5, 192 bytes, linear)
[    0.009209] pinctrl core: initialized pinctrl subsystem
[    0.010037] NET: Registered protocol family 16
[    0.010484] DMA: failed to allocate 0 KiB pool for atomic coherent allocation
[    0.011262] thermal_sys: Registered thermal governor 'step_wise'
[    0.011272] thermal_sys: Registered thermal governor 'user_space'
[    0.011520] cpuidle: using governor menu
[    0.011557] Registered FIQ tty driver
[    0.023712] rockchip-gpio ff380000.gpio: probed /pinctrl/gpio@ff380000
[    0.024478] rockchip-gpio ff530000.gpio: probed /pinctrl/gpio@ff530000
[    0.025211] rockchip-gpio ff550000.gpio: probed /pinctrl/gpio@ff550000
[    0.025854] rockchip-gpio ff560000.gpio: probed /pinctrl/gpio@ff560000
[    0.025956] rockchip-pinctrl pinctrl: probed pinctrl
[    0.035799] fiq_debugger fiq_debugger.0: IRQ uart_irq not found
[    0.035824] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    0.036095] printk: console [ttyFIQ0] enabled
[    0.036284] Registered fiq debugger ttyFIQ0
[    0.038332] SCSI subsystem initialized
[    0.038596] usbcore: registered new interface driver usbfs
[    0.038644] usbcore: registered new interface driver hub
[    0.038693] usbcore: registered new device driver usb
[    0.038914] mc: Linux media interface: v0.10
[    0.038954] videodev: Linux video capture interface: v2.00
[    0.040044] Advanced Linux Sound Architecture Driver Initialized.
[    0.040901] rockchip-cpuinfo cpuinfo: SoC            : 11031000
[    0.040933] rockchip-cpuinfo cpuinfo: Serial         : 21f0fea480be6310
[    0.041328] rockchip,rknpor-powergood ff000000.syscon:rknpor-powergood: probe success!
[    0.042086] clocksource: Switched to clocksource arch_sys_counter
[    0.049264] NET: Registered protocol family 2
[    0.049458] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.049950] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.049990] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.050013] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.050030] TCP: Hash tables configured (established 1024 bind 1024)
[    0.050162] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.050200] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.050327] NET: Registered protocol family 1
[    0.050817] RPC: Registered named UNIX socket transport module.
[    0.050838] RPC: Registered udp transport module.
[    0.050845] RPC: Registered tcp transport module.
[    0.050852] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.053071] Initialise system trusted keyrings
[    0.053301] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    0.057269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.058055] NFS: Registering the id_resolver key type
[    0.058109] Key type id_resolver registered
[    0.058126] Key type id_legacy registered
[    0.058175] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.058647] Key type asymmetric registered
[    0.058687] Asymmetric key parser 'x509' registered
[    0.058713] io scheduler mq-deadline registered
[    0.059194] rockchip-usb2phy ff3e0000.usb2-phy: IRQ index 0 not found
[    0.064105] dma-pl330 ff420000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.064149] dma-pl330 ff420000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.064980] rockchip-pvtm ff240000.pvtm: pvtm@0 probed
[    0.065157] rockchip-pvtm ff390000.pvtm: pvtm@0 probed
[    0.065742] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.070449] random: fast init done
[    0.070744] random: crng init done
[    0.081365] brd: module loaded
[    0.087833] loop: module loaded
[    0.090183] spi-nand spi2.0: unknown raw ID 00000000
[    0.090235] spi-nand: probe of spi2.0 failed with error -524
[    0.091441] usbcore: registered new interface driver rtl8192cu
[    0.091529] usbcore: registered new interface driver rtl8xxxu
[    0.095675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.096119] phy phy-ff3e0000.usb2-phy.0: illegal mode
[    0.096157] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.096206] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    0.096436] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000022010010
[    0.096513] xhci-hcd xhci-hcd.0.auto: irq 55, io mem 0xffb00000
[    0.097473] hub 1-0:1.0: USB hub found
[    0.097535] hub 1-0:1.0: 1 port detected
[    0.097910] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.097948] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    0.098040] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    0.098152] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.098884] hub 2-0:1.0: USB hub found
[    0.098945] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    0.099370] usbcore: registered new interface driver usb-storage
[    0.100713] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[    0.100750] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers
[    0.101223] i2c /dev entries driver
[    0.102717] i2c i2c-4: 1 i2c clients have been registered at 0x30
[    0.103150] i2c i2c-4: 2 i2c clients have been registered at 0x30
[    0.104309] usbcore: registered new interface driver uvcvideo
[    0.104331] USB Video Class driver (1.1.1)
[    0.105640] rockchip-thermal ff3c8000.tsadc: tsadc is probed successfully!
[    0.107110] cpu cpu0: failed to register system monitor
[    0.107597] Synopsys Designware Multimedia Card Interface Driver
[    0.108566] dwmmc_rockchip ffaa0000.mmc: IDMAC supports 32-bit address mode.
[    0.108623] dwmmc_rockchip ffaa0000.mmc: Using internal DMA controller.
[    0.108639] dwmmc_rockchip ffaa0000.mmc: Version ID is 270a
[    0.108686] dwmmc_rockchip ffaa0000.mmc: DW MMC controller at irq 45,32 bit host data width,256 deep fifo
[    0.109939] dtbocfg: 0.1.0
[    0.110017] dtbocfg: OK
[    0.110102] usbcore: registered new interface driver prism2_usb
[    0.112416] rv1106-acodec ff480000.acodec: current soc_id: rv1103
[    0.112546] rv1106-acodec ff480000.acodec: Use pa_ctl_gpio and pa_ctl_delay_ms: 0
[    0.114442] NET: Registered protocol family 17
[    0.114562] Key type dns_resolver registered
[    0.115619] Loading compiled-in X.509 certificates
[    0.116286]
[    0.116326] ********************************************************************
[    0.116334] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    0.116340] **                                                                **
[    0.116346] **  WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[    0.116351] **                                                                **
[    0.116357] ** This means that this kernel is built to expose clk operations  **
[    0.116362] ** such as parent or rate setting, enabling, disabling, etc.      **
[    0.116368] ** to userspace, which may compromise security on your system.    **
[    0.116373] **                                                                **
[    0.116379] ** If you see this message and you are not debugging the          **
[    0.116385] ** kernel, report this immediately to your vendor!                **
[    0.116390] **                                                                **
[    0.116395] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    0.116402] ********************************************************************
[    0.119187] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    0.136999] input: adc-keys as /devices/platform/adc-keys/input/input0
[    0.184202] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0)
[    0.184359] mmc1: new high speed SDHC card at address aaaa
[    0.185336] mmcblk1: mmc1:aaaa SC32G 29.7 GiB
[    0.206318]  mmcblk1: p1(env) p2(idblock) p3(uboot) p4(boot) p5(oem) p6(userdata) p7(rootfs) p8(media)
[    0.210365] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    0.213198] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    0.213363] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    0.213381] cfg80211: failed to load regulatory.db
[    0.214209] ALSA device list:
[    0.214248]   #0: rv-acodec
[    0.227156] EXT4-fs (mmcblk1p7): INFO: recovery required on readonly filesystem
[    0.227187] EXT4-fs (mmcblk1p7): write access will be enabled during recovery
[    0.330129] EXT4-fs (mmcblk1p7): recovery complete
[    0.332348] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: (null)
[    0.332508] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
[    0.339474] devtmpfs: mounted
[    0.339716] Freeing unused kernel memory: 196K
[    0.339726] Kernel memory protection not selected by kernel config.
[    0.339767] Run /sbin/init as init process
[    0.339778]   with arguments:
[    0.339783]     /sbin/init
[    0.339786]   with environment:
[    0.339790]     HOME=/
[    0.339793]     TERM=linux
[    0.339797]     user_debug=31
[    0.339800]     storagemedia=sd
[    0.339803]     earlycon=uart8250,mmio32,0xff4c0000
[    0.344670] process '/bin/busybox' started with executable stack
[    0.345461] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    0.443990] EXT4-fs (mmcblk1p7): re-mounted. Opts: (null)
[    0.489016] rtl8192cu: Chip version 0x11
[    0.541198] rtl8192cu: Board Type 0
[    0.541344] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[    0.541446] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[    0.541508] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    0.543286] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw_TMSC.bin failed with error -2
[    0.543393] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2
[    0.543419] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
[    0.543428] rtlwifi: Selected firmware is not available
[    0.804428] udevd[88]: starting version 3.2.7
[    0.810667] udevd[88]: specified group 'input' unknown
[    0.811796] udevd[88]: specified group 'kvm' unknown
[    0.844012] udevd[89]: starting eudev-3.2.7
[    1.959303] EXT4-fs (mmcblk1p5): recovery complete
[    1.959348] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
[    1.974925] EXT4-fs (mmcblk1p6): recovery complete
[    1.974973] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
[    2.404638] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
[    2.632657] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
[    2.996850] rtl8192cu: MAC auto ON okay!
[    3.013046] rtl8192cu: Tx queue select: 0x05
[    3.574380] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006.
[    3.574407] rtl8192c_common: Firmware is not ready to run!
[    4.346638] file system registered
[    4.376150] using random self ethernet address
[    4.376189] using random host ethernet address
[    4.399858] Mass Storage Function, version: 2009/09/11
[    4.399971] LUN: removable file: (no medium)
[    4.512548] read descriptors
[    4.512664] read strings

luckfox_pico_defconfig file in buildroot/buildroot-2023.02.6/configs

BR2_arm=y
BR2_cortex_a7=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_PATH="../../../../tools/linux/toolchain/arm-rockchip830-linux-uclibcgnueabihf"
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-rockchip830-linux-uclibcgnueabihf"
BR2_TOOLCHAIN_EXTERNAL_GCC_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_10=y
BR2_TOOLCHAIN_EXTERNAL_WCHAR=y
BR2_TOOLCHAIN_EXTERNAL_HAS_SSP=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_PRIMARY_SITE="http://sources.buildroot.net"
BR2_OPTIMIZE_3=y
BR2_TARGET_GENERIC_HOSTNAME="luckfox pico"
BR2_TARGET_GENERIC_ISSUE="Welcome to luckfox pico"
BR2_TARGET_GENERIC_ROOT_PASSWD="luckfox"
BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
BR2_PACKAGE_PYTHON3_SSL=y
BR2_PACKAGE_PYTHON_AIOHTTP=y
BR2_PACKAGE_PYTHON_CLICK=y
BR2_PACKAGE_PYTHON_ITSDANGEROUS=y
BR2_PACKAGE_PYTHON_JINJA2=y
BR2_PACKAGE_PYTHON_PERIPHERY=y
BR2_PACKAGE_PYTHON_PILLOW=y
BR2_PACKAGE_PYTHON_SERIAL=y
BR2_PACKAGE_PYTHON_SETUPTOOLS=y
BR2_PACKAGE_PYTHON_SMBUS_CFFI=y
BR2_PACKAGE_PYTHON_SPIDEV=y
BR2_PACKAGE_PYTHON_WERKZEUG=y
BR2_PACKAGE_DTC=y
BR2_PACKAGE_DTC_PROGRAMS=y
BR2_PACKAGE_LIBV4L=y
BR2_PACKAGE_LIBV4L_UTILS=y
BR2_PACKAGE_DHCPCD=y
BR2_PACKAGE_DNSMASQ=y
BR2_PACKAGE_HOSTAPD=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_LRZSZ=y
BR2_PACKAGE_NTP=y
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_SAMBA4=y
BR2_PACKAGE_WGET=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_WEXT=y
BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY=y
BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING=y
BR2_PACKAGE_WPA_SUPPLICANT_WPA3=y
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO=y
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
BR2_PACKAGE_OPKG=y
BR2_PACKAGE_OPKG_GPG_SIGN=y
BR2_PACKAGE_OPKG_UTILS=y
BR2_PACKAGE_BASH_LOADABLE_EXAMPLES=y
BR2_PACKAGE_DIALOG=y
BR2_PACKAGE_TIME=y
BR2_PACKAGE_HTOP=y
BR2_PACKAGE_NANO=y
BR2_PACKAGE_HOST_DTC=y

.config file in buildroot/buildroot-2023.02.6

#
# Automatically generated file; DO NOT EDIT.
# Buildroot -ge79fd2197-dirty Configuration
#
BR2_HAVE_DOT_CONFIG=y
BR2_HOST_GCC_AT_LEAST_4_9=y
BR2_HOST_GCC_AT_LEAST_5=y
BR2_HOST_GCC_AT_LEAST_6=y
BR2_HOST_GCC_AT_LEAST_7=y
BR2_HOST_GCC_AT_LEAST_8=y
BR2_HOST_GCC_AT_LEAST_9=y

#
# Target options
#
BR2_USE_MMU=y
# BR2_arcle is not set
# BR2_arceb is not set
BR2_arm=y
# BR2_armeb is not set
# BR2_aarch64 is not set
# BR2_aarch64_be is not set
# BR2_i386 is not set
# BR2_m68k is not set
# BR2_microblazeel is not set
# BR2_microblazebe is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_mips64 is not set
# BR2_mips64el is not set
# BR2_nios2 is not set
# BR2_or1k is not set
# BR2_powerpc is not set
# BR2_powerpc64 is not set
# BR2_powerpc64le is not set
# BR2_riscv is not set
# BR2_s390x is not set
# BR2_sh is not set
# BR2_sparc is not set
# BR2_sparc64 is not set
# BR2_x86_64 is not set
# BR2_xtensa is not set
BR2_ARCH_HAS_TOOLCHAIN_BUILDROOT=y
BR2_ARCH="arm"
BR2_NORMALIZED_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_ABI="aapcs-linux"
BR2_GCC_TARGET_CPU="cortex-a7"
BR2_GCC_TARGET_FPU="vfpv4-d16"
BR2_GCC_TARGET_FLOAT_ABI="hard"
BR2_GCC_TARGET_MODE="arm"
BR2_BINFMT_SUPPORTS_SHARED=y
BR2_READELF_ARCH_NAME="ARM"
BR2_ARM_CPU_HAS_NEON=y
BR2_ARM_CPU_HAS_FPU=y
BR2_ARM_CPU_HAS_VFPV2=y
BR2_ARM_CPU_HAS_VFPV3=y
BR2_ARM_CPU_HAS_VFPV4=y
BR2_ARM_CPU_HAS_ARM=y
BR2_ARM_CPU_HAS_THUMB2=y
BR2_ARM_CPU_ARMV7A=y

#
# armv4 cores
#
# BR2_arm920t is not set
# BR2_arm922t is not set
# BR2_fa526 is not set
# BR2_strongarm is not set

#
# armv5 cores
#
# BR2_arm926t is not set
# BR2_xscale is not set

#
# armv6 cores
#
# BR2_arm1136j_s is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set
# BR2_arm11mpcore is not set

#
# armv7a cores
#
# BR2_cortex_a5 is not set
BR2_cortex_a7=y
# BR2_cortex_a8 is not set
# BR2_cortex_a9 is not set
# BR2_cortex_a12 is not set
# BR2_cortex_a15 is not set
# BR2_cortex_a15_a7 is not set
# BR2_cortex_a17 is not set
# BR2_cortex_a17_a7 is not set
# BR2_pj4 is not set

#
# armv7m cores
#
# BR2_cortex_m3 is not set
# BR2_cortex_m4 is not set
# BR2_cortex_m7 is not set

#
# armv8 cores
#
# BR2_cortex_a32 is not set
# BR2_cortex_a35 is not set
# BR2_cortex_a53 is not set
# BR2_cortex_a57 is not set
# BR2_cortex_a57_a53 is not set
# BR2_cortex_a72 is not set
# BR2_cortex_a72_a53 is not set
# BR2_cortex_a73 is not set
# BR2_cortex_a73_a35 is not set
# BR2_cortex_a73_a53 is not set
# BR2_exynos_m1 is not set
# BR2_xgene1 is not set

#
# armv8.1a cores
#

#
# armv8.2a cores
#
# BR2_cortex_a76 is not set
# BR2_cortex_a76_a55 is not set
# BR2_neoverse_n1 is not set

#
# armv8.4a cores
#
# BR2_ARM_EABI is not set
BR2_ARM_EABIHF=y
# BR2_ARM_FPU_VFPV2 is not set
# BR2_ARM_FPU_VFPV3 is not set
# BR2_ARM_FPU_VFPV3D16 is not set
# BR2_ARM_FPU_VFPV4 is not set
BR2_ARM_FPU_VFPV4D16=y
# BR2_ARM_FPU_NEON is not set
# BR2_ARM_FPU_NEON_VFPV4 is not set
BR2_ARM_INSTRUCTIONS_ARM=y
# BR2_ARM_INSTRUCTIONS_THUMB2 is not set
BR2_BINFMT_ELF=y

#
# Toolchain
#
BR2_TOOLCHAIN=y
BR2_TOOLCHAIN_USES_UCLIBC=y
# BR2_TOOLCHAIN_BUILDROOT is not set
BR2_TOOLCHAIN_EXTERNAL=y

#
# Toolchain External Options
#
# BR2_TOOLCHAIN_EXTERNAL_ARM_ARM is not set
# BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM is not set

#
# Sourcery CodeBench toolchains available for the EABI ABI
#
# BR2_TOOLCHAIN_EXTERNAL_BOOTLIN is not set
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
# BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD is not set
BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y
BR2_TOOLCHAIN_EXTERNAL_PATH="../../../../tools/linux/toolchain/arm-rockchip830-linux-uclibcgnueabihf"
BR2_TOOLCHAIN_EXTERNAL_UCLIBC=y
BR2_PACKAGE_HAS_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_PROVIDES_TOOLCHAIN_EXTERNAL="toolchain-external-custom"
BR2_TOOLCHAIN_EXTERNAL_PREFIX="arm-rockchip830-linux-uclibcgnueabihf"
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-rockchip830-linux-uclibcgnueabihf"
# BR2_TOOLCHAIN_EXTERNAL_GCC_12 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_11 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_10 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_9 is not set
BR2_TOOLCHAIN_EXTERNAL_GCC_8=y
# BR2_TOOLCHAIN_EXTERNAL_GCC_7 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_6 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_5 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_4_9 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_4_8 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_4_7 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_4_6 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_4_5 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_4_4 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_4_3 is not set
# BR2_TOOLCHAIN_EXTERNAL_GCC_OLD is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_6_1 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_6_0 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_19 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_18 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_17 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_16 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_15 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_14 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_13 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_12 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_11 is not set
BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_10=y
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_9 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_8 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_7 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_6 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_5 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_4 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_3 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_2 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_1 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_0 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_20 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_19 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_18 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_17 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_16 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_15 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_14 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_13 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_12 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_11 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_10 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_9 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_8 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_7 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_6 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_5 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_4 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_3 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_2 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_1 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_0 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_19 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_18 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_17 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_16 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_15 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_14 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_13 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_12 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_11 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_9 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_8 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_7 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_6 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_5 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_4 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_3 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_2 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_1 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_0 is not set
# BR2_TOOLCHAIN_EXTERNAL_HEADERS_REALLY_OLD is not set
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC=y
# BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC is not set
# BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL is not set
BR2_TOOLCHAIN_EXTERNAL_WCHAR=y
# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
BR2_TOOLCHAIN_EXTERNAL_HAS_SSP=y
# BR2_TOOLCHAIN_EXTERNAL_HAS_SSP_STRONG is not set
# BR2_TOOLCHAIN_EXTERNAL_INET_RPC is not set
BR2_TOOLCHAIN_EXTERNAL_CXX=y
# BR2_TOOLCHAIN_EXTERNAL_DLANG is not set
# BR2_TOOLCHAIN_EXTERNAL_FORTRAN is not set
# BR2_TOOLCHAIN_EXTERNAL_OPENMP is not set
# BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY is not set
BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS=y

#
# Host GDB Options
#
# BR2_PACKAGE_HOST_GDB is not set

#
# Toolchain Generic Options
#
BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS=y
BR2_TOOLCHAIN_SUPPORTS_VARIADIC_MI_THUNK=y
BR2_USE_WCHAR=y
BR2_INSTALL_LIBSTDCPP=y
BR2_TOOLCHAIN_HAS_THREADS=y
BR2_TOOLCHAIN_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_HAS_THREADS_NPTL=y
BR2_TOOLCHAIN_HAS_SSP=y
BR2_TOOLCHAIN_HAS_SSP_STRONG=y
BR2_TOOLCHAIN_HAS_UCONTEXT=y
BR2_TOOLCHAIN_SUPPORTS_PIE=y
BR2_TOOLCHAIN_EXTRA_LIBS=""
BR2_TARGET_OPTIMIZATION=""
BR2_TARGET_LDFLAGS=""
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_4=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_6=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_9=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_16=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_17=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_18=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_19=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_1=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_2=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_3=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_6=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_7=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_8=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_9=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_10=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_11=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_12=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_14=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_16=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_17=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_18=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_19=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_2=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_3=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_5=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_7=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_8=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_9=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_10=y
BR2_TOOLCHAIN_HEADERS_AT_LEAST="5.10"
BR2_TOOLCHAIN_GCC_AT_LEAST_4_3=y
BR2_TOOLCHAIN_GCC_AT_LEAST_4_4=y
BR2_TOOLCHAIN_GCC_AT_LEAST_4_5=y
BR2_TOOLCHAIN_GCC_AT_LEAST_4_6=y
BR2_TOOLCHAIN_GCC_AT_LEAST_4_7=y
BR2_TOOLCHAIN_GCC_AT_LEAST_4_8=y
BR2_TOOLCHAIN_GCC_AT_LEAST_4_9=y
BR2_TOOLCHAIN_GCC_AT_LEAST_5=y
BR2_TOOLCHAIN_GCC_AT_LEAST_6=y
BR2_TOOLCHAIN_GCC_AT_LEAST_7=y
BR2_TOOLCHAIN_GCC_AT_LEAST_8=y
BR2_TOOLCHAIN_GCC_AT_LEAST="8"
BR2_TOOLCHAIN_HAS_MNAN_OPTION=y
BR2_TOOLCHAIN_HAS_SYNC_1=y
BR2_TOOLCHAIN_HAS_SYNC_2=y
BR2_TOOLCHAIN_HAS_SYNC_4=y
BR2_TOOLCHAIN_ARM_HAS_SYNC_8=y
BR2_TOOLCHAIN_HAS_SYNC_8=y
BR2_TOOLCHAIN_HAS_LIBATOMIC=y
BR2_TOOLCHAIN_HAS_ATOMIC=y

#
# Build options
#

#
# Commands
#
BR2_WGET="wget --passive-ftp -nd -t 3"
BR2_SVN="svn --non-interactive"
BR2_BZR="bzr"
BR2_GIT="git"
BR2_CVS="cvs"
BR2_LOCALFILES="cp"
BR2_SCP="scp"
BR2_SFTP="sftp"
BR2_HG="hg"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_XZCAT="xzcat"
BR2_LZCAT="lzip -d -c"
BR2_TAR_OPTIONS=""
BR2_DEFCONFIG="/home/fredsco/dev/luckfox-pico/sysdrv/source/buildroot/buildroot-2023.02.6/configs/luckfox_pico_defconfig"
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_HOST_DIR="$(BASE_DIR)/host"

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE="http://sources.buildroot.net"
# BR2_PRIMARY_SITE_ONLY is not set
BR2_BACKUP_SITE="http://sources.buildroot.net"
BR2_KERNEL_MIRROR="https://cdn.kernel.org/pub"
BR2_GNU_MIRROR="http://ftpmirror.gnu.org"
BR2_LUAROCKS_MIRROR="http://rocks.moonscript.org"
BR2_CPAN_MIRROR="https://cpan.metacpan.org"
BR2_JLEVEL=0
# BR2_CCACHE is not set
# BR2_ENABLE_DEBUG is not set
# BR2_ENABLE_RUNTIME_DEBUG is not set
BR2_STRIP_strip=y
BR2_STRIP_EXCLUDE_FILES=""
BR2_STRIP_EXCLUDE_DIRS=""
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
BR2_OPTIMIZE_3=y
# BR2_OPTIMIZE_G is not set
# BR2_OPTIMIZE_S is not set
# BR2_OPTIMIZE_FAST is not set
# BR2_ENABLE_LTO is not set
# BR2_GOOGLE_BREAKPAD_ENABLE is not set
# BR2_STATIC_LIBS is not set
BR2_SHARED_LIBS=y
# BR2_SHARED_STATIC_LIBS is not set
BR2_PACKAGE_OVERRIDE_FILE="$(CONFIG_DIR)/local.mk"
BR2_GLOBAL_PATCH_DIR=""

#
# Advanced
#
# BR2_FORCE_HOST_BUILD is not set
# BR2_REPRODUCIBLE is not set
# BR2_PER_PACKAGE_DIRECTORIES is not set

#
# Security Hardening Options
#
BR2_PIC_PIE_ARCH_SUPPORTS=y
BR2_PIC_PIE=y
# BR2_SSP_NONE is not set
# BR2_SSP_REGULAR is not set
BR2_SSP_STRONG=y
# BR2_SSP_ALL is not set
BR2_SSP_OPTION="-fstack-protector-strong"
# BR2_RELRO_NONE is not set
# BR2_RELRO_PARTIAL is not set
BR2_RELRO_FULL=y
BR2_FORTIFY_SOURCE_ARCH_SUPPORTS=y

#
# Fortify Source needs a glibc toolchain and optimization
#

#
# System configuration
#
BR2_ROOTFS_SKELETON_DEFAULT=y
# BR2_ROOTFS_SKELETON_CUSTOM is not set
BR2_TARGET_GENERIC_HOSTNAME="luckfox pico"
BR2_TARGET_GENERIC_ISSUE="Welcome to luckfox pico"
BR2_TARGET_GENERIC_PASSWD_SHA256=y
# BR2_TARGET_GENERIC_PASSWD_SHA512 is not set
BR2_TARGET_GENERIC_PASSWD_METHOD="sha-256"
BR2_INIT_BUSYBOX=y
# BR2_INIT_SYSV is not set
# BR2_INIT_OPENRC is not set

#
# systemd needs a glibc toolchain w/ SSP, headers >= 3.15, host and target gcc >= 5
#
# BR2_INIT_NONE is not set
# BR2_ROOTFS_DEVICE_CREATION_STATIC is not set
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV is not set
BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt"
# BR2_ROOTFS_DEVICE_TABLE_SUPPORTS_EXTENDED_ATTRIBUTES is not set
# BR2_ROOTFS_MERGED_USR is not set
BR2_TARGET_ENABLE_ROOT_LOGIN=y
BR2_TARGET_GENERIC_ROOT_PASSWD="luckfox"
BR2_SYSTEM_BIN_SH_BUSYBOX=y
# BR2_SYSTEM_BIN_SH_BASH is not set
# BR2_SYSTEM_BIN_SH_DASH is not set
# BR2_SYSTEM_BIN_SH_MKSH is not set
# BR2_SYSTEM_BIN_SH_ZSH is not set
# BR2_SYSTEM_BIN_SH_NONE is not set
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="console"
BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP=y
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200 is not set
BR2_TARGET_GENERIC_GETTY_BAUDRATE="0"
BR2_TARGET_GENERIC_GETTY_TERM="vt100"
BR2_TARGET_GENERIC_GETTY_OPTIONS=""
BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
BR2_SYSTEM_DHCP=""
BR2_SYSTEM_DEFAULT_PATH="/bin:/sbin:/usr/bin:/usr/sbin"
BR2_ENABLE_LOCALE_PURGE=y
BR2_ENABLE_LOCALE_WHITELIST="C en_US"
# BR2_SYSTEM_ENABLE_NLS is not set
# BR2_TARGET_TZ_INFO is not set
BR2_ROOTFS_USERS_TABLES=""
BR2_ROOTFS_OVERLAY=""
BR2_ROOTFS_PRE_BUILD_SCRIPT=""
BR2_ROOTFS_POST_BUILD_SCRIPT=""
BR2_ROOTFS_POST_FAKEROOT_SCRIPT=""
BR2_ROOTFS_POST_IMAGE_SCRIPT=""

#
# Kernel
#
# BR2_LINUX_KERNEL is not set

#
# Target packages
#
BR2_PACKAGE_BUSYBOX=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox.config"
BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES=""
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
# BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES is not set
# BR2_PACKAGE_BUSYBOX_WATCHDOG is not set
BR2_PACKAGE_SKELETON=y
BR2_PACKAGE_HAS_SKELETON=y
BR2_PACKAGE_PROVIDES_SKELETON="skeleton-init-sysv"
BR2_PACKAGE_SKELETON_INIT_COMMON=y
BR2_PACKAGE_SKELETON_INIT_SYSV=y

#
# Audio and video applications
#
# BR2_PACKAGE_ALSA_UTILS is not set
# BR2_PACKAGE_ATEST is not set
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_BLUEZ_ALSA is not set
# BR2_PACKAGE_DVBLAST is not set
# BR2_PACKAGE_DVDAUTHOR is not set
# BR2_PACKAGE_DVDRW_TOOLS is not set
# BR2_PACKAGE_ESPEAK is not set
# BR2_PACKAGE_FAAD2 is not set
BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS=y
# BR2_PACKAGE_FFMPEG is not set
# BR2_PACKAGE_FLAC is not set
# BR2_PACKAGE_FLITE is not set
# BR2_PACKAGE_FLUID_SOUNDFONT is not set
# BR2_PACKAGE_FLUIDSYNTH is not set
# BR2_PACKAGE_GMRENDER_RESURRECT is not set
# BR2_PACKAGE_GSTREAMER1 is not set
# BR2_PACKAGE_JACK1 is not set
# BR2_PACKAGE_JACK2 is not set
BR2_PACKAGE_KODI_ARCH_SUPPORTS=y

#
# kodi needs python3 w/ .py modules, a uClibc or glibc toolchain w/ C++, threads, wchar, dynamic library, gcc >= 4.9
#

#
# kodi needs udev support for gbm
#

#
# kodi needs an OpenGL EGL backend with OpenGL or GLES support
#
# BR2_PACKAGE_LAME is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MIMIC is not set
# BR2_PACKAGE_MINIMODEM is not set

#
# miraclecast needs systemd and a glibc toolchain w/ threads and wchar
#
# BR2_PACKAGE_MJPEGTOOLS is not set
# BR2_PACKAGE_MODPLUGTOOLS is not set
# BR2_PACKAGE_MOTION is not set
# BR2_PACKAGE_MPD is not set
# BR2_PACKAGE_MPD_MPC is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPV is not set
# BR2_PACKAGE_MULTICAT is not set
# BR2_PACKAGE_MUSEPACK is not set

#
# ncmpc needs a toolchain w/ C++, wchar, threads, gcc >= 10
#
# BR2_PACKAGE_OPUS_TOOLS is not set
# BR2_PACKAGE_PIPEWIRE is not set
BR2_PACKAGE_PULSEAUDIO_HAS_ATOMIC=y
# BR2_PACKAGE_PULSEAUDIO is not set
# BR2_PACKAGE_SOX is not set
# BR2_PACKAGE_SPEECHD is not set
# BR2_PACKAGE_SQUEEZELITE is not set
# BR2_PACKAGE_TINYCOMPRESS is not set
# BR2_PACKAGE_TOVID is not set
# BR2_PACKAGE_TSTOOLS is not set
# BR2_PACKAGE_TWOLAME is not set
# BR2_PACKAGE_UDPXY is not set
# BR2_PACKAGE_UPMPDCLI is not set
# BR2_PACKAGE_V4L2GRAB is not set

#
# v4l2loopback needs a Linux kernel to be built
#
# BR2_PACKAGE_VLC is not set
# BR2_PACKAGE_VORBIS_TOOLS is not set
# BR2_PACKAGE_WAVPACK is not set
# BR2_PACKAGE_YAVTA is not set
# BR2_PACKAGE_YMPD is not set
# BR2_PACKAGE_ZYNADDSUBFX is not set

#
# Compressors and decompressors
#
# BR2_PACKAGE_BROTLI is not set
# BR2_PACKAGE_BZIP2 is not set
# BR2_PACKAGE_GZIP is not set
# BR2_PACKAGE_LRZIP is not set
# BR2_PACKAGE_LZIP is not set
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_P7ZIP is not set
# BR2_PACKAGE_PIGZ is not set
# BR2_PACKAGE_PIXZ is not set
# BR2_PACKAGE_UNRAR is not set
# BR2_PACKAGE_UNZIP is not set
# BR2_PACKAGE_XZ is not set
# BR2_PACKAGE_ZIP is not set
# BR2_PACKAGE_ZSTD is not set

#
# Debugging, profiling and benchmark
#
# BR2_PACKAGE_BABELTRACE2 is not set
# BR2_PACKAGE_BLKTRACE is not set
# BR2_PACKAGE_BONNIE is not set
# BR2_PACKAGE_CACHE_CALIBRATOR is not set

#
# clinfo needs an OpenCL provider
#

#
# clpeak needs an OpenCL provider, a toolchain w/ C++, gcc >= 4.8
#
# BR2_PACKAGE_COREMARK is not set
# BR2_PACKAGE_COREMARK_PRO is not set

#
# dacapo needs OpenJDK
#
# BR2_PACKAGE_DHRYSTONE is not set
# BR2_PACKAGE_DIEHARDER is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_DROPWATCH is not set
# BR2_PACKAGE_DSTAT is not set
# BR2_PACKAGE_DT is not set
# BR2_PACKAGE_DUMA is not set
# BR2_PACKAGE_FIO is not set
BR2_PACKAGE_FWTS_ARCH_SUPPORTS=y

#
# fwts needs a glibc toolchain w/ wchar, threads, dynamic library
#
BR2_PACKAGE_GDB_ARCH_SUPPORTS=y
# BR2_PACKAGE_GDB is not set
BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS=y
# BR2_PACKAGE_GOOGLE_BREAKPAD is not set
# BR2_PACKAGE_IOZONE is not set
# BR2_PACKAGE_KEXEC is not set
BR2_PACKAGE_KVM_UNIT_TESTS_ARCH_SUPPORTS=y
# BR2_PACKAGE_KVM_UNIT_TESTS is not set
# BR2_PACKAGE_LATENCYTOP is not set
# BR2_PACKAGE_LIBBPF is not set
# BR2_PACKAGE_LMBENCH is not set
# BR2_PACKAGE_LSOF is not set
BR2_PACKAGE_LTP_TESTSUITE_ARCH_SUPPORTS=y
# BR2_PACKAGE_LTP_TESTSUITE is not set
BR2_PACKAGE_LTRACE_ARCH_SUPPORTS=y
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_LTTNG_BABELTRACE is not set

#
# lttng-modules needs a Linux kernel to be built
#
# BR2_PACKAGE_LTTNG_TOOLS is not set
# BR2_PACKAGE_MBW is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NETPERF is not set
# BR2_PACKAGE_NETSNIFF_NG is not set

#
# nmon needs a glibc toolchain
#
BR2_PACKAGE_OPROFILE_ARCH_SUPPORTS=y
# BR2_PACKAGE_OPROFILE is not set
# BR2_PACKAGE_PAX_UTILS is not set
BR2_PACKAGE_PERFTEST_ARCH_SUPPORTS=y
# BR2_PACKAGE_PERFTEST is not set

#
# piglit needs a glibc or musl toolchain w/ C++
#
BR2_PACKAGE_PLY_ARCH_SUPPORTS=y
# BR2_PACKAGE_PLY is not set
# BR2_PACKAGE_POKE is not set
BR2_PACKAGE_PTM2HUMAN_ARCH_SUPPORTS=y
# BR2_PACKAGE_PTM2HUMAN is not set
# BR2_PACKAGE_PV is not set
# BR2_PACKAGE_RAMSMP is not set
# BR2_PACKAGE_RAMSPEED is not set
# BR2_PACKAGE_RT_TESTS is not set
# BR2_PACKAGE_RWMEM is not set

#
# sentry-native needs a glibc toolchain with w/ wchar, thread, C++, gcc >= 4.8
#
# BR2_PACKAGE_SIGNAL_ESTIMATOR is not set
# BR2_PACKAGE_SPIDEV_TEST is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_STRESS is not set
# BR2_PACKAGE_STRESS_NG is not set

#
# sysdig needs a glibc toolchain w/ C++, threads, gcc >= 5, dynamic library, a Linux kernel, and luajit or lua 5.1 to be built
#
# BR2_PACKAGE_TCF_AGENT is not set
BR2_PACKAGE_TCF_AGENT_ARCH="arm"
BR2_PACKAGE_TCF_AGENT_ARCH_SUPPORTS=y
# BR2_PACKAGE_TINYMEMBENCH is not set
# BR2_PACKAGE_TRACE_CMD is not set
BR2_PACKAGE_TRINITY_ARCH_SUPPORTS=y
# BR2_PACKAGE_TRINITY is not set
# BR2_PACKAGE_UCLIBC_NG_TEST is not set
BR2_PACKAGE_UFTRACE_ARCH_SUPPORTS=y
# BR2_PACKAGE_UFTRACE is not set
BR2_PACKAGE_VALGRIND_ARCH_SUPPORTS=y
# BR2_PACKAGE_VALGRIND is not set
# BR2_PACKAGE_VMTOUCH is not set
# BR2_PACKAGE_WHETSTONE is not set

#
# Development tools
#
# BR2_PACKAGE_AVOCADO is not set
# BR2_PACKAGE_BATS_CORE is not set
# BR2_PACKAGE_BINUTILS is not set
# BR2_PACKAGE_BITWISE is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CHECK is not set
BR2_PACKAGE_CMAKE_ARCH_SUPPORTS=y
# BR2_PACKAGE_CMAKE_CTEST is not set
# BR2_PACKAGE_CPPUNIT is not set
# BR2_PACKAGE_CUKINIA is not set
# BR2_PACKAGE_CUNIT is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_CXXTEST is not set
# BR2_PACKAGE_DIFFUTILS is not set
# BR2_PACKAGE_DOS2UNIX is not set
# BR2_PACKAGE_FINDUTILS is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GAWK is not set
# BR2_PACKAGE_GETTEXT is not set
BR2_PACKAGE_PROVIDES_HOST_GETTEXT="host-gettext-tiny"
# BR2_PACKAGE_GIT is not set
# BR2_PACKAGE_GIT_CRYPT is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_GREP is not set
# BR2_PACKAGE_JO is not set
# BR2_PACKAGE_JQ is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_MAWK is not set
# BR2_PACKAGE_PATCH is not set
# BR2_PACKAGE_PKGCONF is not set
# BR2_PACKAGE_SED is not set
# BR2_PACKAGE_SUBVERSION is not set
# BR2_PACKAGE_TREE is not set

#
# Filesystem and flash utilities
#
# BR2_PACKAGE_ABOOTIMG is not set

#
# aufs-util needs a linux kernel and a toolchain w/ threads
#
# BR2_PACKAGE_AUTOFS is not set
# BR2_PACKAGE_BMAP_TOOLS is not set
# BR2_PACKAGE_BTRFS_PROGS is not set
# BR2_PACKAGE_CIFS_UTILS is not set
# BR2_PACKAGE_CPIO is not set
# BR2_PACKAGE_CRAMFS is not set
# BR2_PACKAGE_CURLFTPFS is not set

#
# davfs2 needs a glibc toolchain
#
# BR2_PACKAGE_DOSFSTOOLS is not set
BR2_PACKAGE_E2FSPROGS=y
# BR2_PACKAGE_E2FSPROGS_DEBUGFS is not set
# BR2_PACKAGE_E2FSPROGS_E2IMAGE is not set

#
# e2scrub needs bash, coreutils, lvm2, and util-linux
#

#
# e4defrag needs a glibc or musl toolchain
#
BR2_PACKAGE_E2FSPROGS_FSCK=y
# BR2_PACKAGE_E2FSPROGS_FUSE2FS is not set
BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
# BR2_PACKAGE_E2TOOLS is not set
# BR2_PACKAGE_ECRYPTFS_UTILS is not set
# BR2_PACKAGE_EROFS_UTILS is not set
# BR2_PACKAGE_EXFAT is not set
# BR2_PACKAGE_EXFAT_UTILS is not set
# BR2_PACKAGE_EXFATPROGS is not set
# BR2_PACKAGE_F2FS_TOOLS is not set
# BR2_PACKAGE_FIRMWARE_UTILS is not set
# BR2_PACKAGE_FLASHBENCH is not set
# BR2_PACKAGE_FSCRYPTCTL is not set
# BR2_PACKAGE_FUSE_OVERLAYFS is not set
# BR2_PACKAGE_FWUP is not set
# BR2_PACKAGE_GENEXT2FS is not set
# BR2_PACKAGE_GENPART is not set
# BR2_PACKAGE_GENROMFS is not set
# BR2_PACKAGE_GOCRYPTFS is not set
# BR2_PACKAGE_IMX_USB_LOADER is not set
# BR2_PACKAGE_MMC_UTILS is not set
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_MTOOLS is not set
# BR2_PACKAGE_NFS_UTILS is not set
# BR2_PACKAGE_NILFS_UTILS is not set
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_SP_OOPS_EXTRACT is not set
# BR2_PACKAGE_SQUASHFS is not set
# BR2_PACKAGE_SSHFS is not set
# BR2_PACKAGE_SUNXI_TOOLS is not set
# BR2_PACKAGE_UDFTOOLS is not set
# BR2_PACKAGE_UNIONFS is not set
# BR2_PACKAGE_XFSPROGS is not set
# BR2_PACKAGE_ZEROFREE is not set

#
# zfs needs a Linux kernel to be built
#

#
# Fonts, cursors, icons, sounds and themes
#

#
# Cursors
#
# BR2_PACKAGE_COMIX_CURSORS is not set
# BR2_PACKAGE_OBSIDIAN_CURSORS is not set

#
# Fonts
#
# BR2_PACKAGE_BITSTREAM_VERA is not set
# BR2_PACKAGE_CANTARELL is not set
# BR2_PACKAGE_DEJAVU is not set
# BR2_PACKAGE_FONT_AWESOME is not set
# BR2_PACKAGE_GHOSTSCRIPT_FONTS is not set
# BR2_PACKAGE_INCONSOLATA is not set
# BR2_PACKAGE_LIBERATION is not set
# BR2_PACKAGE_WQY_ZENHEI is not set

#
# Icons
#
# BR2_PACKAGE_GOOGLE_MATERIAL_DESIGN_ICONS is not set
# BR2_PACKAGE_HICOLOR_ICON_THEME is not set

#
# Sounds
#
# BR2_PACKAGE_SOUND_THEME_BOREALIS is not set
# BR2_PACKAGE_SOUND_THEME_FREEDESKTOP is not set

#
# Themes
#

#
# Games
#
# BR2_PACKAGE_ASCII_INVADERS is not set
# BR2_PACKAGE_CHOCOLATE_DOOM is not set
# BR2_PACKAGE_FLARE_ENGINE is not set
# BR2_PACKAGE_FROTZ is not set
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_LBREAKOUT2 is not set
# BR2_PACKAGE_LTRIS is not set

#
# minetest needs X11 and an OpenGL provider
#
# BR2_PACKAGE_OPENTYRIAN is not set
# BR2_PACKAGE_PRBOOM is not set
# BR2_PACKAGE_SL is not set

#
# solarus needs OpenGL and a toolchain w/ C++, gcc >= 4.9, NPTL, dynamic library, and luajit or lua 5.1
#
# BR2_PACKAGE_STELLA is not set
# BR2_PACKAGE_XORCURSES is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# Graphic applications
#

#
# cage needs udev, EGL w/ Wayland backend and OpenGL ES support
#

#
# cog needs wpewebkit and a toolchain w/ threads
#
# BR2_PACKAGE_FSWEBCAM is not set
# BR2_PACKAGE_GHOSTSCRIPT is not set

#
# glmark2 needs an OpenGL or an openGL ES and EGL backend
#

#
# glslsandbox-player needs openGL ES and EGL driver
#
# BR2_PACKAGE_GNUPLOT is not set
# BR2_PACKAGE_JHEAD is not set

#
# kmscube needs EGL, GBM and OpenGL ES, and a toolchain w/ thread support
#
# BR2_PACKAGE_LIBVA_UTILS is not set
BR2_PACKAGE_MIDORI_ARCH_SUPPORTS=y

#
# midori needs a glibc toolchain w/ C++, wchar, threads, dynamic library, gcc >= 7, host gcc >= 8
#

#
# midori needs libgtk3 w/ X11 or wayland backend
#
BR2_PACKAGE_NETSURF_ARCH_SUPPORTS=y
# BR2_PACKAGE_NETSURF is not set
# BR2_PACKAGE_PNGQUANT is not set
# BR2_PACKAGE_RRDTOOL is not set

#
# stellarium needs Qt5 and an OpenGL provider
#

#
# sway needs systemd, udev, EGL w/ Wayland backend and OpenGL ES support
#
# BR2_PACKAGE_TESSERACT_OCR is not set
# BR2_PACKAGE_TINIFIER is not set

#
# Graphic libraries
#
# BR2_PACKAGE_CEGUI is not set
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FB_TEST_APP is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_FBGRAB is not set
# BR2_PACKAGE_FBSET is not set

#
# fbterm needs a toolchain w/ C++, wchar, locale
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FREERDP is not set
# BR2_PACKAGE_GRAPHICSMAGICK is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_LIBGLVND is not set

#
# linux-fusion needs a Linux kernel to be built
#
# BR2_PACKAGE_MESA3D is not set
# BR2_PACKAGE_OCRAD is not set

#
# ogre needs X11 and an OpenGL provider
#
# BR2_PACKAGE_PSPLASH is not set
# BR2_PACKAGE_SDL is not set
# BR2_PACKAGE_SDL2 is not set
# BR2_PACKAGE_VULKAN_HEADERS is not set

#
# Other GUIs
#
BR2_PACKAGE_QT5_JSCORE_AVAILABLE=y
# BR2_PACKAGE_QT5 is not set
BR2_PACKAGE_QT6_ARCH_SUPPORTS=y
# BR2_PACKAGE_QT6 is not set

#
# tekui needs a Lua interpreter and a toolchain w/ threads, dynamic library
#

#
# weston needs udev and a toolchain w/ locale, threads, dynamic library, headers >= 3.0
#
# BR2_PACKAGE_XORG7 is not set
# BR2_PACKAGE_APITRACE is not set

#
# vte needs a uClibc or glibc toolchain w/ wchar, threads, C++, gcc >= 10
#

#
# vte needs an OpenGL or an OpenGL-EGL/wayland backend
#
# BR2_PACKAGE_XKEYBOARD_CONFIG is not set

#
# Hardware handling
#

#
# Firmware
#
# BR2_PACKAGE_AM33X_CM3 is not set
# BR2_PACKAGE_ARMBIAN_FIRMWARE is not set
# BR2_PACKAGE_B43_FIRMWARE is not set
# BR2_PACKAGE_BRCMFMAC_SDIO_FIRMWARE_RPI is not set
# BR2_PACKAGE_LINUX_FIRMWARE is not set
# BR2_PACKAGE_MURATA_CYW_FW is not set
# BR2_PACKAGE_ODROIDC2_FIRMWARE is not set
# BR2_PACKAGE_QCOM_DB410C_FIRMWARE is not set
# BR2_PACKAGE_RCW_SMARC_SAL28 is not set
# BR2_PACKAGE_RPI_FIRMWARE is not set
# BR2_PACKAGE_SUNXI_BOARDS is not set
# BR2_PACKAGE_TS4900_FPGA is not set
# BR2_PACKAGE_UX500_FIRMWARE is not set
# BR2_PACKAGE_WILC1000_FIRMWARE is not set
# BR2_PACKAGE_WILC3000_FIRMWARE is not set
# BR2_PACKAGE_WILINK_BT_FIRMWARE is not set
# BR2_PACKAGE_ZD1211_FIRMWARE is not set
# BR2_PACKAGE_18XX_TI_UTILS is not set

#
# a10disp needs a Linux kernel to be built
#
# BR2_PACKAGE_ACPICA is not set
# BR2_PACKAGE_ACPID is not set
# BR2_PACKAGE_ACPITOOL is not set
# BR2_PACKAGE_AER_INJECT is not set
# BR2_PACKAGE_ALTERA_STAPL is not set
# BR2_PACKAGE_AM335X_PRU_PACKAGE is not set
# BR2_PACKAGE_APCUPSD is not set
# BR2_PACKAGE_AVRDUDE is not set

#
# bcache-tools needs udev /dev management
#

#
# brickd needs udev /dev management, a toolchain w/ threads, wchar
#
# BR2_PACKAGE_BRLTTY is not set
# BR2_PACKAGE_CBOOTIMAGE is not set
# BR2_PACKAGE_CC_TOOL is not set
# BR2_PACKAGE_CDRKIT is not set
BR2_PACKAGE_CPUBURN_ARM_ARCH_SUPPORTS=y
# BR2_PACKAGE_CPUBURN_ARM is not set
# BR2_PACKAGE_CRUCIBLE is not set
# BR2_PACKAGE_CRYPTSETUP is not set
# BR2_PACKAGE_CWIID is not set

#
# dahdi-linux needs a Linux kernel to be built
#

#
# dahdi-tools needs a toolchain w/ threads and a Linux kernel to be built
#
# BR2_PACKAGE_DAVINCI_BOOTCOUNT is not set
# BR2_PACKAGE_DBUS is not set

#
# dbusbroker needs systemd and a toolchain w/ threads
#
# BR2_PACKAGE_DBUS_CXX is not set
# BR2_PACKAGE_DFU_UTIL is not set
# BR2_PACKAGE_DMRAID is not set

#
# dt-utils needs udev /dev management
#

#
# dtbocfg needs a Linux kernel to be built
#
# BR2_PACKAGE_DTV_SCAN_TABLES is not set
# BR2_PACKAGE_DUMP1090 is not set
# BR2_PACKAGE_DVB_APPS is not set
# BR2_PACKAGE_DVBSNOOP is not set
# BR2_PACKAGE_EDID_DECODE is not set

#
# eudev needs eudev /dev management
#
# BR2_PACKAGE_EVEMU is not set
# BR2_PACKAGE_EVTEST is not set
# BR2_PACKAGE_FAN_CTRL is not set
# BR2_PACKAGE_FCONFIG is not set
BR2_PACKAGE_FLASHROM_ARCH_SUPPORTS=y
# BR2_PACKAGE_FLASHROM is not set
# BR2_PACKAGE_FMTOOLS is not set
# BR2_PACKAGE_FREEIPMI is not set
# BR2_PACKAGE_FREESCALE_IMX is not set
# BR2_PACKAGE_FXLOAD is not set

#
# gcnano-binaries needs a Linux kernel to be built
#

#
# gcnano-binaries needs a glibc toolchain w/ threads, dynamic library
#
# BR2_PACKAGE_GPM is not set
# BR2_PACKAGE_GPSD is not set
# BR2_PACKAGE_GPTFDISK is not set
# BR2_PACKAGE_GVFS is not set
# BR2_PACKAGE_HDDTEMP is not set
# BR2_PACKAGE_HDPARM is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_HWLOC is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
# BR2_PACKAGE_IPMITOOL is not set
# BR2_PACKAGE_IRDA_UTILS is not set
# BR2_PACKAGE_KBD is not set
# BR2_PACKAGE_LCDPROC is not set
# BR2_PACKAGE_LIBIEC61850 is not set
# BR2_PACKAGE_LIBMANETTE is not set
# BR2_PACKAGE_LIBUBOOTENV is not set
# BR2_PACKAGE_LIBUIO is not set

#
# linux-backports needs a Linux kernel to be built
#
# BR2_PACKAGE_LINUX_SERIAL_TEST is not set
# BR2_PACKAGE_LINUXCONSOLETOOLS is not set
# BR2_PACKAGE_LIRC_TOOLS is not set
# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LSHW is not set
# BR2_PACKAGE_LSSCSI is not set
# BR2_PACKAGE_LSUIO is not set
# BR2_PACKAGE_LUKSMETA is not set
# BR2_PACKAGE_LVM2 is not set

#
# mali-driver needs a Linux kernel to be built
#

#
# mali-t76x needs a glibc toolchain with armhf enabled
#
# BR2_PACKAGE_MBPFAN is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MDEVD is not set

#
# mdio-tools needs a Linux kernel to be built
#
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MEMTOOL is not set
# BR2_PACKAGE_MINICOM is not set
# BR2_PACKAGE_NANOCOM is not set
# BR2_PACKAGE_NEARD is not set
# BR2_PACKAGE_NVIDIA_MODPROBE is not set
# BR2_PACKAGE_NVME is not set
# BR2_PACKAGE_OFONO is not set
# BR2_PACKAGE_OLA is not set
# BR2_PACKAGE_OPEN2300 is not set
# BR2_PACKAGE_OPENFPGALOADER is not set
# BR2_PACKAGE_OPENIPMI is not set
# BR2_PACKAGE_OPENOCD is not set

#
# owl-linux needs a Linux kernel to be built
#

#
# owl-linux is only supported on ARM9 architecture
#

#
# parted needs a toolchain w/ locale, wchar
#
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PDBG is not set
# BR2_PACKAGE_PICOCOM is not set
# BR2_PACKAGE_PIFMRDS is not set
# BR2_PACKAGE_PIGPIO is not set
# BR2_PACKAGE_POWERTOP is not set
# BR2_PACKAGE_PPS_TOOLS is not set
# BR2_PACKAGE_PRU_SOFTWARE_SUPPORT is not set
# BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE is not set
# BR2_PACKAGE_RASPI_GPIO is not set
# BR2_PACKAGE_RDMA_CORE is not set
# BR2_PACKAGE_READ_EDID is not set
# BR2_PACKAGE_RNG_TOOLS is not set

#
# rockchip-mali needs a glibc toolchain w/ C++, threads
#
# BR2_PACKAGE_RPI_USERLAND is not set
# BR2_PACKAGE_RS485CONF is not set
# BR2_PACKAGE_RTC_TOOLS is not set

#
# rtl8188eu needs a Linux kernel to be built
#

#
# rtl8189es needs a Linux kernel to be built
#

#
# rtl8189fs needs a Linux kernel to be built
#

#
# rtl8192eu needs a Linux kernel to be built
#

#
# rtl8723bu needs a Linux kernel to be built
#

#
# rtl8723ds needs a Linux kernel to be built
#
# BR2_PACKAGE_RTL8723DS_BT is not set

#
# rtl8812au-aircrack-ng needs a Linux kernel to be built
#

#
# rtl8821au needs a Linux kernel to be built
#

#
# rtl8821cu needs a Linux kernel to be built
#
# BR2_PACKAGE_SANE_BACKENDS is not set
# BR2_PACKAGE_SDPARM is not set
BR2_PACKAGE_SEDUTIL_ARCH_SUPPORTS=y
# BR2_PACKAGE_SEDUTIL is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SG3_UTILS is not set

#
# sigrok-cli needs a toolchain w/ locale, wchar, threads, dynamic library, gcc >= 4.7
#
# BR2_PACKAGE_SISPMCTL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_SMSTOOLS3 is not set
# BR2_PACKAGE_SPI_TOOLS is not set
# BR2_PACKAGE_SREDIRD is not set
# BR2_PACKAGE_STATSERIAL is not set
# BR2_PACKAGE_STM32FLASH is not set

#
# sunxi-cedarx needs a glibc toolchain
#

#
# sunxi-mali-utgard needs an EABIhf glibc toolchain
#
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_TARGETCLI_FB is not set

#
# ti-gfx needs a glibc toolchain and a Linux kernel to be built
#

#
# ti-sgx-km needs a Linux kernel to be built
#

#
# ti-sgx-um needs udev and a glibc toolchain w/ threads
#
# BR2_PACKAGE_TI_UIM is not set
# BR2_PACKAGE_TI_UTILS is not set
# BR2_PACKAGE_TIO is not set
# BR2_PACKAGE_TRIGGERHAPPY is not set
# BR2_PACKAGE_UBOOT_TOOLS is not set
# BR2_PACKAGE_UBUS is not set

#
# udisks needs udev /dev management
#

#
# udisks needs a toolchain with dynamic library, locale, wchar, threads, gcc >= 7
#
# BR2_PACKAGE_UHUBCTL is not set
# BR2_PACKAGE_UMTPRD is not set

#
# upower needs udev /dev management
#
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USB_MODESWITCH_DATA is not set
# BR2_PACKAGE_USBGUARD is not set

#
# usbmount requires udev to be enabled
#

#
# usbutils needs udev /dev management and toolchain w/ threads, gcc >= 4.9
#
# BR2_PACKAGE_W_SCAN is not set

#
# wf111 needs a Linux kernel to be built
#

#
# wilc kernel module needs a Linux kernel to be built
#
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XORRISO is not set

#
# xr819-xradio driver needs a Linux kernel to be built
#

#
# Interpreter languages and scripting
#
# BR2_PACKAGE_4TH is not set
# BR2_PACKAGE_ENSCRIPT is not set
BR2_PACKAGE_HOST_ERLANG_ARCH_SUPPORTS=y
BR2_PACKAGE_ERLANG_ARCH_SUPPORTS=y
# BR2_PACKAGE_ERLANG is not set
# BR2_PACKAGE_EXECLINE is not set
# BR2_PACKAGE_FICL is not set
BR2_PACKAGE_GAUCHE_ARCH_SUPPORTS=y
# BR2_PACKAGE_GAUCHE is not set
# BR2_PACKAGE_GUILE is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_JANET is not set
# BR2_PACKAGE_JIMTCL is not set
# BR2_PACKAGE_LUA is not set
BR2_PACKAGE_PROVIDES_HOST_LUAINTERPRETER="host-lua"
BR2_PACKAGE_LUAJIT_ARCH_SUPPORTS=y
# BR2_PACKAGE_LUAJIT is not set
# BR2_PACKAGE_MICROPYTHON is not set
# BR2_PACKAGE_MOARVM is not set
BR2_PACKAGE_HOST_MONO_ARCH_SUPPORTS=y
BR2_PACKAGE_MONO_ARCH_SUPPORTS=y
# BR2_PACKAGE_MONO is not set
BR2_PACKAGE_NODEJS_ARCH_SUPPORTS=y
# BR2_PACKAGE_NODEJS is not set

#
# octave needs a toolchain w/ C++ and fortran, gcc >= 4.8
#
BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS=y
BR2_PACKAGE_OPENJDK_ARCH_SUPPORTS=y

#
# openjdk needs X.Org
#

#
# openjdk needs glibc, and a toolchain w/ wchar, dynamic library, threads, C++, gcc >= 4.9, host gcc >= 4.9
#
# BR2_PACKAGE_PERL is not set
BR2_PACKAGE_PHP_ARCH_SUPPORTS=y
# BR2_PACKAGE_PHP is not set
BR2_PACKAGE_PYTHON3=y
# BR2_PACKAGE_PYTHON3_PY_ONLY is not set
BR2_PACKAGE_PYTHON3_PYC_ONLY=y
# BR2_PACKAGE_PYTHON3_PY_PYC is not set

#
# core python3 modules
#

#
# The following modules are unusual or require extra libraries
#
# BR2_PACKAGE_PYTHON3_2TO3 is not set
# BR2_PACKAGE_PYTHON3_BERKELEYDB is not set
# BR2_PACKAGE_PYTHON3_BZIP2 is not set
# BR2_PACKAGE_PYTHON3_CODECSCJK is not set
# BR2_PACKAGE_PYTHON3_CURSES is not set
# BR2_PACKAGE_PYTHON3_DECIMAL is not set
# BR2_PACKAGE_PYTHON3_OSSAUDIODEV is not set
# BR2_PACKAGE_PYTHON3_READLINE is not set
BR2_PACKAGE_PYTHON3_SSL=y
BR2_PACKAGE_PYTHON3_UNICODEDATA=y
# BR2_PACKAGE_PYTHON3_SQLITE is not set
BR2_PACKAGE_PYTHON3_PYEXPAT=y
# BR2_PACKAGE_PYTHON3_XZ is not set
BR2_PACKAGE_PYTHON3_ZLIB=y

#
# External python modules
#
# BR2_PACKAGE_PYTHON_AENUM is not set
# BR2_PACKAGE_PYTHON_AEXPECT is not set
# BR2_PACKAGE_PYTHON_AIOBLESCAN is not set
# BR2_PACKAGE_PYTHON_AIOCOAP is not set
# BR2_PACKAGE_PYTHON_AIOCONSOLE is not set
BR2_PACKAGE_PYTHON_AIODNS=y
# BR2_PACKAGE_PYTHON_AIOFILES is not set
BR2_PACKAGE_PYTHON_AIOHTTP=y
# BR2_PACKAGE_PYTHON_AIOHTTP_CORS is not set
# BR2_PACKAGE_PYTHON_AIOHTTP_DEBUGTOOLBAR is not set
# BR2_PACKAGE_PYTHON_AIOHTTP_JINJA2 is not set
# BR2_PACKAGE_PYTHON_AIOHTTP_MAKO is not set
# BR2_PACKAGE_PYTHON_AIOHTTP_REMOTES is not set
# BR2_PACKAGE_PYTHON_AIOHTTP_SECURITY is not set
# BR2_PACKAGE_PYTHON_AIOHTTP_SESSION is not set
# BR2_PACKAGE_PYTHON_AIOHTTP_SSE is not set
# BR2_PACKAGE_PYTHON_AIOJOBS is not set
# BR2_PACKAGE_PYTHON_AIOLOGSTASH is not set
# BR2_PACKAGE_PYTHON_AIOMONITOR is not set
# BR2_PACKAGE_PYTHON_AIOPROCESSING is not set
# BR2_PACKAGE_PYTHON_AIOREDIS is not set
# BR2_PACKAGE_PYTHON_AIORWLOCK is not set
BR2_PACKAGE_PYTHON_AIOSIGNAL=y
# BR2_PACKAGE_PYTHON_AIOZIPKIN is not set
# BR2_PACKAGE_PYTHON_ALEMBIC is not set
# BR2_PACKAGE_PYTHON_ALSAAUDIO is not set
# BR2_PACKAGE_PYTHON_ANSICOLORS is not set
# BR2_PACKAGE_PYTHON_APISPEC is not set
# BR2_PACKAGE_PYTHON_APPDIRS is not set
# BR2_PACKAGE_PYTHON_ARGH is not set
# BR2_PACKAGE_PYTHON_ARGON2_CFFI is not set
# BR2_PACKAGE_PYTHON_ARGON2_CFFI_BINDINGS is not set
# BR2_PACKAGE_PYTHON_ARROW is not set
# BR2_PACKAGE_PYTHON_ASGIREF is not set
# BR2_PACKAGE_PYTHON_ASN1CRYPTO is not set
# BR2_PACKAGE_PYTHON_ASTTOKENS is not set
# BR2_PACKAGE_PYTHON_ASYNC_GENERATOR is not set
# BR2_PACKAGE_PYTHON_ASYNC_LRU is not set
BR2_PACKAGE_PYTHON_ASYNC_TIMEOUT=y
BR2_PACKAGE_PYTHON_ATTRS=y
# BR2_PACKAGE_PYTHON_AUGEAS is not set
# BR2_PACKAGE_PYTHON_AUTOMAT is not set
# BR2_PACKAGE_PYTHON_AVRO is not set
# BR2_PACKAGE_PYTHON_BABEL is not set
# BR2_PACKAGE_PYTHON_BACKCALL is not set
# BR2_PACKAGE_PYTHON_BEAUTIFULSOUP4 is not set
# BR2_PACKAGE_PYTHON_BIDICT is not set
# BR2_PACKAGE_PYTHON_BITSTRING is not set
# BR2_PACKAGE_PYTHON_BLEAK is not set

#
# python-bluezero needs a glibc toolchain, gcc >= 4.9, host gcc >= 8
#
# BR2_PACKAGE_PYTHON_BOTO3 is not set
# BR2_PACKAGE_PYTHON_BOTOCORE is not set
# BR2_PACKAGE_PYTHON_BOTTLE is not set
# BR2_PACKAGE_PYTHON_BROTLI is not set
# BR2_PACKAGE_PYTHON_BSDIFF4 is not set
# BR2_PACKAGE_PYTHON_CACHED_PROPERTY is not set
# BR2_PACKAGE_PYTHON_CAN is not set
# BR2_PACKAGE_PYTHON_CANOPEN is not set
# BR2_PACKAGE_PYTHON_CBOR is not set
# BR2_PACKAGE_PYTHON_CBOR2 is not set
BR2_PACKAGE_PYTHON_CCHARDET=y
# BR2_PACKAGE_PYTHON_CERTIFI is not set
BR2_PACKAGE_PYTHON_CFFI=y
# BR2_PACKAGE_PYTHON_CHARACTERISTIC is not set
# BR2_PACKAGE_PYTHON_CHARDET is not set
# BR2_PACKAGE_PYTHON_CHARSET_NORMALIZER is not set
# BR2_PACKAGE_PYTHON_CHEETAH is not set
# BR2_PACKAGE_PYTHON_CHEROOT is not set
# BR2_PACKAGE_PYTHON_CHERRYPY is not set
BR2_PACKAGE_PYTHON_CLICK=y
# BR2_PACKAGE_PYTHON_COLORAMA is not set
# BR2_PACKAGE_PYTHON_COLORLOG is not set
# BR2_PACKAGE_PYTHON_COLORZERO is not set
# BR2_PACKAGE_PYTHON_CONFIGSHELL_FB is not set
# BR2_PACKAGE_PYTHON_CONSTANTLY is not set
# BR2_PACKAGE_PYTHON_CONSTRUCT is not set
# BR2_PACKAGE_PYTHON_COUCHDB is not set
# BR2_PACKAGE_PYTHON_CRAYONS is not set
# BR2_PACKAGE_PYTHON_CRC16 is not set
# BR2_PACKAGE_PYTHON_CRCMOD is not set
# BR2_PACKAGE_PYTHON_CRONTAB is not set
# BR2_PACKAGE_PYTHON_CSSSELECT is not set
# BR2_PACKAGE_PYTHON_CSSSELECT2 is not set
# BR2_PACKAGE_PYTHON_CSSUTILS is not set
# BR2_PACKAGE_PYTHON_CYCLER is not set
# BR2_PACKAGE_PYTHON_DAEMON is not set
# BR2_PACKAGE_PYTHON_DAEMONIZE is not set
# BR2_PACKAGE_PYTHON_DATAPROPERTY is not set
# BR2_PACKAGE_PYTHON_DATEUTIL is not set
# BR2_PACKAGE_PYTHON_DBUS_FAST is not set
# BR2_PACKAGE_PYTHON_DBUS_NEXT is not set
# BR2_PACKAGE_PYTHON_DECORATOR is not set
# BR2_PACKAGE_PYTHON_DEFUSEDXML is not set
# BR2_PACKAGE_PYTHON_DIALOG3 is not set
# BR2_PACKAGE_PYTHON_DICTTOXML is not set
# BR2_PACKAGE_PYTHON_DICTTOXML2 is not set
# BR2_PACKAGE_PYTHON_DISTRO is not set
# BR2_PACKAGE_PYTHON_DJANGO is not set
# BR2_PACKAGE_PYTHON_DJANGO_ENUMFIELDS is not set
# BR2_PACKAGE_PYTHON_DNSPYTHON is not set
# BR2_PACKAGE_PYTHON_DOCKER is not set
# BR2_PACKAGE_PYTHON_DOCKER_PYCREDS is not set
# BR2_PACKAGE_PYTHON_DOCKERPTY is not set
# BR2_PACKAGE_PYTHON_DOCOPT is not set
# BR2_PACKAGE_PYTHON_DOCUTILS is not set
# BR2_PACKAGE_PYTHON_DOMINATE is not set
# BR2_PACKAGE_PYTHON_DPKT is not set
# BR2_PACKAGE_PYTHON_DTSCHEMA is not set
# BR2_PACKAGE_PYTHON_ECDSA is not set
# BR2_PACKAGE_PYTHON_ENGINEIO is not set
# BR2_PACKAGE_PYTHON_ENTRYPOINTS is not set
# BR2_PACKAGE_PYTHON_EXECUTING is not set
# BR2_PACKAGE_PYTHON_FALCON is not set
# BR2_PACKAGE_PYTHON_FILELOCK is not set
# BR2_PACKAGE_PYTHON_FIRE is not set
# BR2_PACKAGE_PYTHON_FLASK is not set
# BR2_PACKAGE_PYTHON_FLASK_BABEL is not set
# BR2_PACKAGE_PYTHON_FLASK_CORS is not set
# BR2_PACKAGE_PYTHON_FLASK_EXPECTS_JSON is not set
# BR2_PACKAGE_PYTHON_FLASK_JSONRPC is not set
# BR2_PACKAGE_PYTHON_FLASK_LOGIN is not set
# BR2_PACKAGE_PYTHON_FLASK_SMOREST is not set
# BR2_PACKAGE_PYTHON_FLASK_SQLALCHEMY is not set
# BR2_PACKAGE_PYTHON_FLASK_WTF is not set
# BR2_PACKAGE_PYTHON_FLATBUFFERS is not set
# BR2_PACKAGE_PYTHON_FLUP is not set
# BR2_PACKAGE_PYTHON_FONTTOOLS is not set
BR2_PACKAGE_PYTHON_FROZENLIST=y
# BR2_PACKAGE_PYTHON_FUTURE is not set
# BR2_PACKAGE_PYTHON_GIT is not set
# BR2_PACKAGE_PYTHON_GITDB2 is not set
# BR2_PACKAGE_PYTHON_GNUPG is not set

#
# python-gobject needs a glibc toolchain, gcc >= 4.9, host gcc >= 8
#
# BR2_PACKAGE_PYTHON_GPIOZERO is not set
BR2_PACKAGE_PYTHON_GREENLET_ARCH_SUPPORTS=y
# BR2_PACKAGE_PYTHON_GREENLET is not set
# BR2_PACKAGE_PYTHON_GUNICORN is not set
# BR2_PACKAGE_PYTHON_H11 is not set
# BR2_PACKAGE_PYTHON_H2 is not set
# BR2_PACKAGE_PYTHON_HIREDIS is not set
# BR2_PACKAGE_PYTHON_HKDF is not set
# BR2_PACKAGE_PYTHON_HPACK is not set
# BR2_PACKAGE_PYTHON_HTML5LIB is not set
# BR2_PACKAGE_PYTHON_HTTPLIB2 is not set
# BR2_PACKAGE_PYTHON_HUEPY is not set
# BR2_PACKAGE_PYTHON_HUMANIZE is not set
# BR2_PACKAGE_PYTHON_HYPERFRAME is not set
# BR2_PACKAGE_PYTHON_HYPERLINK is not set
# BR2_PACKAGE_PYTHON_IBMIOTF is not set
BR2_PACKAGE_PYTHON_IDNA=y
# BR2_PACKAGE_PYTHON_IFADDR is not set
# BR2_PACKAGE_PYTHON_INCREMENTAL is not set
# BR2_PACKAGE_PYTHON_INFLECTION is not set
# BR2_PACKAGE_PYTHON_INFLUXDB is not set
# BR2_PACKAGE_PYTHON_INICONFIG is not set
# BR2_PACKAGE_PYTHON_INIPARSE is not set
# BR2_PACKAGE_PYTHON_INTELHEX is not set
# BR2_PACKAGE_PYTHON_IOWAIT is not set
# BR2_PACKAGE_PYTHON_IPDB is not set
# BR2_PACKAGE_PYTHON_IPTABLES is not set
# BR2_PACKAGE_PYTHON_IPY is not set
# BR2_PACKAGE_PYTHON_IPYTHON is not set
# BR2_PACKAGE_PYTHON_IPYTHON_GENUTILS is not set
# BR2_PACKAGE_PYTHON_ISO8601 is not set
BR2_PACKAGE_PYTHON_ITSDANGEROUS=y
# BR2_PACKAGE_PYTHON_JANUS is not set
# BR2_PACKAGE_PYTHON_JARACO_CLASSES is not set
# BR2_PACKAGE_PYTHON_JARACO_FUNCTOOLS is not set
# BR2_PACKAGE_PYTHON_JEDI is not set
BR2_PACKAGE_PYTHON_JINJA2=y
# BR2_PACKAGE_PYTHON_JMESPATH is not set
# BR2_PACKAGE_PYTHON_JSON_SCHEMA_VALIDATOR is not set
# BR2_PACKAGE_PYTHON_JSONMODELS is not set
# BR2_PACKAGE_PYTHON_JSONSCHEMA is not set
# BR2_PACKAGE_PYTHON_KIWISOLVER is not set
# BR2_PACKAGE_PYTHON_LARK is not set
# BR2_PACKAGE_PYTHON_LIBCONFIG is not set
# BR2_PACKAGE_PYTHON_LIBEVDEV is not set
# BR2_PACKAGE_PYTHON_LIBUSB1 is not set
# BR2_PACKAGE_PYTHON_LMDB is not set
# BR2_PACKAGE_PYTHON_LOCKFILE is not set
# BR2_PACKAGE_PYTHON_LOGBOOK is not set
# BR2_PACKAGE_PYTHON_LOGSTASH is not set
# BR2_PACKAGE_PYTHON_LXML is not set
# BR2_PACKAGE_PYTHON_M2CRYPTO is not set
# BR2_PACKAGE_PYTHON_MAGIC_WORMHOLE_TRANSIT_RELAY is not set
# BR2_PACKAGE_PYTHON_MAKO is not set
# BR2_PACKAGE_PYTHON_MARKDOWN is not set
# BR2_PACKAGE_PYTHON_MARKDOWN2 is not set
BR2_PACKAGE_PYTHON_MARKUPSAFE=y
# BR2_PACKAGE_PYTHON_MARSHMALLOW is not set
# BR2_PACKAGE_PYTHON_MARSHMALLOW_SQLALCHEMY is not set

#
# python-matplotlib needs a glibc or musl toolchain w/ C++
#
# BR2_PACKAGE_PYTHON_MBSTRDECODER is not set
# BR2_PACKAGE_PYTHON_MEMORY_PROFILER is not set
# BR2_PACKAGE_PYTHON_MIMEPARSE is not set
# BR2_PACKAGE_PYTHON_MINIMALMODBUS is not set
# BR2_PACKAGE_PYTHON_MISTUNE is not set
# BR2_PACKAGE_PYTHON_MODBUS_TK is not set
# BR2_PACKAGE_PYTHON_MORE_ITERTOOLS is not set
# BR2_PACKAGE_PYTHON_MPD2 is not set
# BR2_PACKAGE_PYTHON_MSGFY is not set
# BR2_PACKAGE_PYTHON_MSGPACK is not set
BR2_PACKAGE_PYTHON_MULTIDICT=y
# BR2_PACKAGE_PYTHON_MUNCH is not set
# BR2_PACKAGE_PYTHON_MUTAGEN is not set
# BR2_PACKAGE_PYTHON_MWCLIENT is not set
# BR2_PACKAGE_PYTHON_MWSCRAPE is not set
# BR2_PACKAGE_PYTHON_MWSCRAPE2SLOB is not set
# BR2_PACKAGE_PYTHON_MYPY_EXTENSIONS is not set
# BR2_PACKAGE_PYTHON_NESTED_DICT is not set
# BR2_PACKAGE_PYTHON_NETADDR is not set
# BR2_PACKAGE_PYTHON_NETIFACES is not set
# BR2_PACKAGE_PYTHON_NETWORKX is not set
BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS=y

#
# python-numpy needs a glibc or musl toolchain w/ C++
#
# BR2_PACKAGE_PYTHON_OAUTHLIB is not set
# BR2_PACKAGE_PYTHON_OUTCOME is not set
# BR2_PACKAGE_PYTHON_PACKAGING is not set
# BR2_PACKAGE_PYTHON_PAHO_MQTT is not set
# BR2_PACKAGE_PYTHON_PARSO is not set
# BR2_PACKAGE_PYTHON_PASSLIB is not set
# BR2_PACKAGE_PYTHON_PATHPY is not set
# BR2_PACKAGE_PYTHON_PATHTOOLS is not set
# BR2_PACKAGE_PYTHON_PATHVALIDATE is not set
BR2_PACKAGE_PYTHON_PERIPHERY=y
# BR2_PACKAGE_PYTHON_PEXPECT is not set
# BR2_PACKAGE_PYTHON_PICKLESHARE is not set
# BR2_PACKAGE_PYTHON_PIEXIF is not set
# BR2_PACKAGE_PYTHON_PIGPIO is not set
BR2_PACKAGE_PYTHON_PILLOW=y
# BR2_PACKAGE_PYTHON_PIP is not set
# BR2_PACKAGE_PYTHON_PLUGGY is not set
# BR2_PACKAGE_PYTHON_PLY is not set
# BR2_PACKAGE_PYTHON_PORTEND is not set
# BR2_PACKAGE_PYTHON_POSIX_IPC is not set
# BR2_PACKAGE_PYTHON_PRIORITY is not set
# BR2_PACKAGE_PYTHON_PROMPT_TOOLKIT is not set
# BR2_PACKAGE_PYTHON_PROTOBUF is not set
# BR2_PACKAGE_PYTHON_PSUTIL is not set
# BR2_PACKAGE_PYTHON_PSYCOPG2 is not set
# BR2_PACKAGE_PYTHON_PTYPROCESS is not set
# BR2_PACKAGE_PYTHON_PUDB is not set
# BR2_PACKAGE_PYTHON_PURE_EVAL is not set
# BR2_PACKAGE_PYTHON_PY is not set
# BR2_PACKAGE_PYTHON_PYAES is not set
# BR2_PACKAGE_PYTHON_PYALSA is not set
# BR2_PACKAGE_PYTHON_PYASN1 is not set
# BR2_PACKAGE_PYTHON_PYASN1_MODULES is not set
# BR2_PACKAGE_PYTHON_PYBIND is not set
# BR2_PACKAGE_PYTHON_PYCAIRO is not set
BR2_PACKAGE_PYTHON_PYCARES=y
BR2_PACKAGE_PYTHON_PYCPARSER=y
# BR2_PACKAGE_PYTHON_PYCRATE is not set
# BR2_PACKAGE_PYTHON_PYCRYPTODOMEX is not set
# BR2_PACKAGE_PYTHON_PYDAL is not set
# BR2_PACKAGE_PYTHON_PYDANTIC is not set
# BR2_PACKAGE_PYTHON_PYDEVMEM is not set
# BR2_PACKAGE_PYTHON_PYDYF is not set
# BR2_PACKAGE_PYTHON_PYELFTOOLS is not set
# BR2_PACKAGE_PYTHON_PYFTPDLIB is not set
# BR2_PACKAGE_PYTHON_PYGAME is not set
# BR2_PACKAGE_PYTHON_PYGMENTS is not set
# BR2_PACKAGE_PYTHON_PYHAMCREST is not set
# BR2_PACKAGE_PYTHON_PYICU is not set
# BR2_PACKAGE_PYTHON_PYINOTIFY is not set
# BR2_PACKAGE_PYTHON_PYJWT is not set
# BR2_PACKAGE_PYTHON_PYLIBFDT is not set
# BR2_PACKAGE_PYTHON_PYLIBFTDI is not set
# BR2_PACKAGE_PYTHON_PYLRU is not set
# BR2_PACKAGE_PYTHON_PYMODBUS is not set

#
# python-pymupdf needs Xorg
#
# BR2_PACKAGE_PYTHON_PYMYSQL is not set
# BR2_PACKAGE_PYTHON_PYNACL is not set
# BR2_PACKAGE_PYTHON_PYNDIFF is not set
# BR2_PACKAGE_PYTHON_PYPARSING is not set

#
# pyparted needs a toolchain w/ locale, wchar
#
# BR2_PACKAGE_PYTHON_PYPHEN is not set
# BR2_PACKAGE_PYTHON_PYQRCODE is not set

#
# python-pyqt5 needs Qt5
#
# BR2_PACKAGE_PYTHON_PYRATEMP is not set
# BR2_PACKAGE_PYTHON_PYROUTE2 is not set
# BR2_PACKAGE_PYTHON_PYRSISTENT is not set
# BR2_PACKAGE_PYTHON_PYSENDFILE is not set
# BR2_PACKAGE_PYTHON_PYSMB is not set
# BR2_PACKAGE_PYTHON_PYSMI is not set
# BR2_PACKAGE_PYTHON_PYSNMP is not set
# BR2_PACKAGE_PYTHON_PYSNMP_MIBS is not set
# BR2_PACKAGE_PYTHON_PYSOCKS is not set
# BR2_PACKAGE_PYTHON_PYTABLEREADER is not set
# BR2_PACKAGE_PYTHON_PYTABLEWRITER is not set
# BR2_PACKAGE_PYTHON_PYTEST is not set
# BR2_PACKAGE_PYTHON_PYTEST_ASYNCIO is not set
# BR2_PACKAGE_PYTHON_PYTRIE is not set
# BR2_PACKAGE_PYTHON_PYTZ is not set

#
# python-pyudev needs udev /dev management
#
# BR2_PACKAGE_PYTHON_PYUSB is not set
# BR2_PACKAGE_PYTHON_PYXB is not set
# BR2_PACKAGE_PYTHON_PYYAML is not set
# BR2_PACKAGE_PYTHON_PYZMQ is not set
# BR2_PACKAGE_PYTHON_QRCODE is not set
# BR2_PACKAGE_PYTHON_RAVEN is not set
# BR2_PACKAGE_PYTHON_REDIS is not set
# BR2_PACKAGE_PYTHON_REEDSOLO is not set
# BR2_PACKAGE_PYTHON_REENTRY is not set
# BR2_PACKAGE_PYTHON_REGEX is not set
# BR2_PACKAGE_PYTHON_REMI is not set
# BR2_PACKAGE_PYTHON_REQUEST_ID is not set
# BR2_PACKAGE_PYTHON_REQUESTS is not set
# BR2_PACKAGE_PYTHON_REQUESTS_OAUTHLIB is not set
# BR2_PACKAGE_PYTHON_REQUESTS_TOOLBELT is not set
# BR2_PACKAGE_PYTHON_RFC3987 is not set
# BR2_PACKAGE_PYTHON_RPI_GPIO is not set
# BR2_PACKAGE_PYTHON_RPI_WS281X is not set
# BR2_PACKAGE_PYTHON_RSA is not set
# BR2_PACKAGE_PYTHON_RTSLIB_FB is not set
# BR2_PACKAGE_PYTHON_RUAMEL_YAML is not set
# BR2_PACKAGE_PYTHON_S3TRANSFER is not set
# BR2_PACKAGE_PYTHON_SCANDIR is not set
# BR2_PACKAGE_PYTHON_SCAPY is not set
# BR2_PACKAGE_PYTHON_SCHEDULE is not set

#
# python-scipy needs toolchain w/ fortran and c++ and glibc or musl
#
# BR2_PACKAGE_PYTHON_SDNOTIFY is not set
# BR2_PACKAGE_PYTHON_SEE is not set
# BR2_PACKAGE_PYTHON_SELENIUM is not set
# BR2_PACKAGE_PYTHON_SEMVER is not set
# BR2_PACKAGE_PYTHON_SENTRY_SDK is not set
BR2_PACKAGE_PYTHON_SERIAL=y
# BR2_PACKAGE_PYTHON_SERIAL_ASYNCIO is not set
# BR2_PACKAGE_PYTHON_SETPROCTITLE is not set
BR2_PACKAGE_PYTHON_SETUPTOOLS=y
# BR2_PACKAGE_PYTHON_SH is not set
# BR2_PACKAGE_PYTHON_SHUTILWHICH is not set
# BR2_PACKAGE_PYTHON_SIMPLEAUDIO is not set
# BR2_PACKAGE_PYTHON_SIMPLEGENERIC is not set
# BR2_PACKAGE_PYTHON_SIMPLEJSON is not set
# BR2_PACKAGE_PYTHON_SIMPLELOGGING is not set
# BR2_PACKAGE_PYTHON_SIMPLESQLITE is not set
# BR2_PACKAGE_PYTHON_SIX is not set
# BR2_PACKAGE_PYTHON_SLOB is not set
BR2_PACKAGE_PYTHON_SMBUS_CFFI=y
# BR2_PACKAGE_PYTHON_SMMAP2 is not set
# BR2_PACKAGE_PYTHON_SNAPPY is not set
# BR2_PACKAGE_PYTHON_SNIFFIO is not set
# BR2_PACKAGE_PYTHON_SOCKETIO is not set
# BR2_PACKAGE_PYTHON_SOCKJS is not set
# BR2_PACKAGE_PYTHON_SORTEDCONTAINERS is not set
# BR2_PACKAGE_PYTHON_SOUPSIEVE is not set
# BR2_PACKAGE_PYTHON_SPAKE2 is not set
BR2_PACKAGE_PYTHON_SPIDEV=y
# BR2_PACKAGE_PYTHON_SQLALCHEMY is not set
# BR2_PACKAGE_PYTHON_SQLITESCHEMA is not set
# BR2_PACKAGE_PYTHON_SQLPARSE is not set
# BR2_PACKAGE_PYTHON_STACK_DATA is not set

#
# python-systemd needs systemd
#
# BR2_PACKAGE_PYTHON_TABLEDATA is not set
# BR2_PACKAGE_PYTHON_TEMPORA is not set
# BR2_PACKAGE_PYTHON_TERMCOLOR is not set
# BR2_PACKAGE_PYTHON_TERMINALTABLES is not set
# BR2_PACKAGE_PYTHON_TEXTTABLE is not set
# BR2_PACKAGE_PYTHON_THRIFT is not set
# BR2_PACKAGE_PYTHON_TINYCSS2 is not set
# BR2_PACKAGE_PYTHON_TINYRPC is not set
# BR2_PACKAGE_PYTHON_TOMAKO is not set
# BR2_PACKAGE_PYTHON_TOML is not set
# BR2_PACKAGE_PYTHON_TOMLI is not set
# BR2_PACKAGE_PYTHON_TORNADO is not set
# BR2_PACKAGE_PYTHON_TQDM is not set
# BR2_PACKAGE_PYTHON_TRAITLETS is not set
# BR2_PACKAGE_PYTHON_TRIO is not set
# BR2_PACKAGE_PYTHON_TRIO_WEBSOCKET is not set
# BR2_PACKAGE_PYTHON_TWISTED is not set
# BR2_PACKAGE_PYTHON_TXAIO is not set
# BR2_PACKAGE_PYTHON_TYPEGUARD is not set
# BR2_PACKAGE_PYTHON_TYPEPY is not set
BR2_PACKAGE_PYTHON_TYPING_EXTENSIONS=y
# BR2_PACKAGE_PYTHON_TYPING_INSPECT is not set
# BR2_PACKAGE_PYTHON_U_MSGPACK is not set
# BR2_PACKAGE_PYTHON_UBJSON is not set
# BR2_PACKAGE_PYTHON_UHID is not set
# BR2_PACKAGE_PYTHON_UJSON is not set
# BR2_PACKAGE_PYTHON_UNITTEST_XML_REPORTING is not set
# BR2_PACKAGE_PYTHON_URLLIB3 is not set
# BR2_PACKAGE_PYTHON_URWID is not set
# BR2_PACKAGE_PYTHON_UVLOOP is not set
# BR2_PACKAGE_PYTHON_VALIDATORS is not set
# BR2_PACKAGE_PYTHON_VERSIONTOOLS is not set
# BR2_PACKAGE_PYTHON_VISITOR is not set
# BR2_PACKAGE_PYTHON_WATCHDOG is not set
# BR2_PACKAGE_PYTHON_WCWIDTH is not set
# BR2_PACKAGE_PYTHON_WEASYPRINT is not set
# BR2_PACKAGE_PYTHON_WEB2PY is not set
# BR2_PACKAGE_PYTHON_WEBARGS is not set
# BR2_PACKAGE_PYTHON_WEBENCODINGS is not set
# BR2_PACKAGE_PYTHON_WEBOB is not set
# BR2_PACKAGE_PYTHON_WEBPY is not set
# BR2_PACKAGE_PYTHON_WEBSOCKET_CLIENT is not set
# BR2_PACKAGE_PYTHON_WEBSOCKETS is not set
BR2_PACKAGE_PYTHON_WERKZEUG=y
# BR2_PACKAGE_PYTHON_WHOOSH is not set
# BR2_PACKAGE_PYTHON_WRAPT is not set
# BR2_PACKAGE_PYTHON_WS4PY is not set
# BR2_PACKAGE_PYTHON_WSACCEL is not set
# BR2_PACKAGE_PYTHON_WSPROTO is not set
# BR2_PACKAGE_PYTHON_WTFORMS is not set
# BR2_PACKAGE_PYTHON_XLIB is not set
# BR2_PACKAGE_PYTHON_XLRD is not set
# BR2_PACKAGE_PYTHON_XLSXWRITER is not set
# BR2_PACKAGE_PYTHON_XLUTILS is not set
# BR2_PACKAGE_PYTHON_XLWT is not set
# BR2_PACKAGE_PYTHON_XMLJSON is not set
# BR2_PACKAGE_PYTHON_XMLTODICT is not set
# BR2_PACKAGE_PYTHON_XMODEM is not set
BR2_PACKAGE_PYTHON_YARL=y
# BR2_PACKAGE_PYTHON_YATL is not set
# BR2_PACKAGE_PYTHON_ZC_LOCKFILE is not set
# BR2_PACKAGE_PYTHON_ZEROCONF is not set

#
# python-zlmdb needs a glibc or musl toolchain w/ C++
#
# BR2_PACKAGE_PYTHON_ZOPE_INTERFACE is not set
# BR2_PACKAGE_PYTHON_ZOPFLI is not set

#
# quickjs needs a glibc or musl toolchain w/ gcc >= 4.9, host gcc >= 4.9, dynamic library
#
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set

#
# Libraries
#

#
# Audio/Sound
#
# BR2_PACKAGE_ALSA_LIB is not set
# BR2_PACKAGE_ALURE is not set
# BR2_PACKAGE_AUBIO is not set
# BR2_PACKAGE_BCG729 is not set
# BR2_PACKAGE_CAPS is not set
BR2_PACKAGE_FDK_AAC_ARCH_SUPPORTS=y
# BR2_PACKAGE_FDK_AAC is not set
# BR2_PACKAGE_LIBAO is not set
# BR2_PACKAGE_LIBASPLIB is not set
# BR2_PACKAGE_LIBBROADVOICE is not set
# BR2_PACKAGE_LIBCDAUDIO is not set
# BR2_PACKAGE_LIBCDDB is not set
# BR2_PACKAGE_LIBCDIO is not set
# BR2_PACKAGE_LIBCDIO_PARANOIA is not set
# BR2_PACKAGE_LIBCODEC2 is not set
# BR2_PACKAGE_LIBCUE is not set
# BR2_PACKAGE_LIBCUEFILE is not set
# BR2_PACKAGE_LIBEBUR128 is not set
# BR2_PACKAGE_LIBG7221 is not set
# BR2_PACKAGE_LIBGSM is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBILBC is not set
# BR2_PACKAGE_LIBLO is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMODPLUG is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBMPDCLIENT is not set
# BR2_PACKAGE_LIBREPLAYGAIN is not set
# BR2_PACKAGE_LIBSAMPLERATE is not set
# BR2_PACKAGE_LIBSIDPLAY2 is not set
# BR2_PACKAGE_LIBSILK is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBSOUNDTOUCH is not set
# BR2_PACKAGE_LIBSOXR is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_LILV is not set
# BR2_PACKAGE_LV2 is not set
# BR2_PACKAGE_MP4V2 is not set
BR2_PACKAGE_OPENAL_ARCH_SUPPORTS=y
# BR2_PACKAGE_OPENAL is not set
# BR2_PACKAGE_OPENCORE_AMR is not set
# BR2_PACKAGE_OPUS is not set
# BR2_PACKAGE_OPUSFILE is not set
# BR2_PACKAGE_PORTAUDIO is not set
# BR2_PACKAGE_SBC is not set
# BR2_PACKAGE_SPANDSP is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_SPEEXDSP is not set
# BR2_PACKAGE_SRATOM is not set
# BR2_PACKAGE_TAGLIB is not set
# BR2_PACKAGE_TINYALSA is not set
# BR2_PACKAGE_TREMOR is not set
# BR2_PACKAGE_VO_AACENC is not set
BR2_PACKAGE_WEBRTC_AUDIO_PROCESSING_ARCH_SUPPORTS=y
# BR2_PACKAGE_WEBRTC_AUDIO_PROCESSING is not set

#
# Compression and decompression
#
BR2_PACKAGE_LIBARCHIVE=y
# BR2_PACKAGE_LIBARCHIVE_BSDTAR is not set
# BR2_PACKAGE_LIBARCHIVE_BSDCPIO is not set
# BR2_PACKAGE_LIBARCHIVE_BSDCAT is not set
# BR2_PACKAGE_LIBDEFLATE is not set
# BR2_PACKAGE_LIBMSPACK is not set
# BR2_PACKAGE_LIBSQUISH is not set
# BR2_PACKAGE_LIBZIP is not set
# BR2_PACKAGE_LZ4 is not set
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_MINIZIP is not set
# BR2_PACKAGE_MINIZIP_ZLIB is not set
# BR2_PACKAGE_SNAPPY is not set
# BR2_PACKAGE_SZIP is not set
# BR2_PACKAGE_ZCHUNK is not set
BR2_PACKAGE_ZLIB_NG_ARCH_SUPPORTS=y
BR2_PACKAGE_ZLIB=y
BR2_PACKAGE_LIBZLIB=y
# BR2_PACKAGE_ZLIB_NG is not set
BR2_PACKAGE_HAS_ZLIB=y
BR2_PACKAGE_PROVIDES_ZLIB="libzlib"
BR2_PACKAGE_PROVIDES_HOST_ZLIB="host-libzlib"
# BR2_PACKAGE_ZZIPLIB is not set

#
# Crypto
#
# BR2_PACKAGE_BEARSSL is not set
# BR2_PACKAGE_BEECRYPT is not set
BR2_PACKAGE_BOTAN_ARCH_SUPPORTS=y
# BR2_PACKAGE_BOTAN is not set
# BR2_PACKAGE_CA_CERTIFICATES is not set

#
# cryptodev needs a Linux kernel to be built
#
# BR2_PACKAGE_CRYPTOPP is not set
# BR2_PACKAGE_GCR is not set
BR2_PACKAGE_GNUTLS=y
# BR2_PACKAGE_GNUTLS_OPENSSL is not set
# BR2_PACKAGE_GNUTLS_TOOLS is not set
# BR2_PACKAGE_GNUTLS_ENABLE_SSL2 is not set
# BR2_PACKAGE_GNUTLS_ENABLE_GOST is not set
# BR2_PACKAGE_LIBARGON2 is not set
BR2_PACKAGE_LIBASSUAN=y
# BR2_PACKAGE_LIBB2 is not set
BR2_PACKAGE_LIBGCRYPT=y
BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS=y
BR2_PACKAGE_LIBGPG_ERROR=y
BR2_PACKAGE_LIBGPG_ERROR_SYSCFG="arm-unknown-linux-gnueabi"
BR2_PACKAGE_LIBGPGME=y
# BR2_PACKAGE_LIBKCAPI is not set
BR2_PACKAGE_LIBKSBA=y
# BR2_PACKAGE_LIBMD is not set
# BR2_PACKAGE_LIBMHASH is not set
# BR2_PACKAGE_LIBNSS is not set
# BR2_PACKAGE_LIBOLM is not set
# BR2_PACKAGE_LIBP11 is not set
# BR2_PACKAGE_LIBSCRYPT is not set
# BR2_PACKAGE_LIBSECRET is not set
# BR2_PACKAGE_LIBSHA1 is not set
# BR2_PACKAGE_LIBSODIUM is not set
# BR2_PACKAGE_LIBSSH is not set
# BR2_PACKAGE_LIBSSH2 is not set
# BR2_PACKAGE_LIBTOMCRYPT is not set
# BR2_PACKAGE_LIBUECC is not set
# BR2_PACKAGE_LIBXCRYPT is not set
# BR2_PACKAGE_MBEDTLS is not set
BR2_PACKAGE_NETTLE=y
BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_LIBOPENSSL=y
BR2_PACKAGE_LIBOPENSSL_TARGET_ARCH="linux-armv4"
# BR2_PACKAGE_LIBOPENSSL_BIN is not set
# BR2_PACKAGE_LIBOPENSSL_ENGINES is not set
BR2_PACKAGE_LIBOPENSSL_ENABLE_CHACHA=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_RC2=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_RC4=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_MD2=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_MD4=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_MDC2=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_BLAKE2=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_IDEA=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_SEED=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_DES=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_RMD160=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_WHIRLPOOL=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_BLOWFISH=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_SSL=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_SSL2=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_SSL3=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_WEAK_SSL=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_PSK=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_CAST=y
BR2_PACKAGE_LIBOPENSSL_UNSECURE=y
BR2_PACKAGE_LIBOPENSSL_DYNAMIC_ENGINE=y
BR2_PACKAGE_LIBOPENSSL_ENABLE_COMP=y
BR2_PACKAGE_HAS_OPENSSL=y
BR2_PACKAGE_PROVIDES_OPENSSL="libopenssl"
BR2_PACKAGE_PROVIDES_HOST_OPENSSL="host-libopenssl"
# BR2_PACKAGE_PKCS11_HELPER is not set
# BR2_PACKAGE_RHASH is not set
# BR2_PACKAGE_TINYDTLS is not set
# BR2_PACKAGE_TPM2_PKCS11 is not set
# BR2_PACKAGE_TPM2_TSS is not set
# BR2_PACKAGE_TROUSERS is not set
# BR2_PACKAGE_USTREAM_SSL is not set
BR2_PACKAGE_WOLFSSL_ASM_SUPPORTS=y
# BR2_PACKAGE_WOLFSSL is not set
# BR2_PACKAGE_WOLFTPM is not set

#
# Database
#
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_GDBM is not set
# BR2_PACKAGE_HIREDIS is not set
# BR2_PACKAGE_KOMPEXSQLITE is not set
# BR2_PACKAGE_LEVELDB is not set
# BR2_PACKAGE_LIBDBI is not set
# BR2_PACKAGE_LIBDBI_DRIVERS is not set
# BR2_PACKAGE_LIBGIT2 is not set
# BR2_PACKAGE_LIBMDBX is not set
# BR2_PACKAGE_LIBODB is not set
BR2_PACKAGE_MONGODB_ARCH_SUPPORTS=y

#
# mongodb needs a glibc toolchain w/ wchar, threads, C++, gcc >= 7
#
# BR2_PACKAGE_MYSQL is not set
# BR2_PACKAGE_POSTGRESQL is not set
# BR2_PACKAGE_REDIS is not set
# BR2_PACKAGE_SQLCIPHER is not set
# BR2_PACKAGE_SQLITE is not set
# BR2_PACKAGE_UNIXODBC is not set

#
# Filesystem
#
# BR2_PACKAGE_GAMIN is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBFUSE is not set
# BR2_PACKAGE_LIBFUSE3 is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBNFS is not set
# BR2_PACKAGE_LIBSYSFS is not set
# BR2_PACKAGE_LOCKDEV is not set
# BR2_PACKAGE_PHYSFS is not set

#
# Graphics
#
# BR2_PACKAGE_ASSIMP is not set

#
# at-spi2-atk depends on X.org
#

#
# at-spi2-core depends on X.org
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_ATKMM is not set
# BR2_PACKAGE_ATKMM2_28 is not set
BR2_PACKAGE_BAYER2RGB_NEON_ARCH_SUPPORTS=y
# BR2_PACKAGE_BAYER2RGB_NEON is not set
# BR2_PACKAGE_BULLET is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_CAIROMM is not set
# BR2_PACKAGE_CAIROMM1_14 is not set

#
# chipmunk needs an OpenGL backend
#
# BR2_PACKAGE_EXEMPI is not set
# BR2_PACKAGE_EXIV2 is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_GD is not set
# BR2_PACKAGE_GDK_PIXBUF is not set
# BR2_PACKAGE_GIFLIB is not set

#
# granite needs libgtk3 and a toolchain w/ wchar, threads, gcc >= 4.9
#
# BR2_PACKAGE_GRAPHITE2 is not set

#
# gtkmm3 needs libgtk3 and a toolchain w/ C++, wchar, threads, gcc >= 4.9
#
# BR2_PACKAGE_HARFBUZZ is not set
# BR2_PACKAGE_IJS is not set
# BR2_PACKAGE_IMLIB2 is not set

#
# irrlicht needs X11 and an OpenGL provider
#
# BR2_PACKAGE_JASPER is not set
# BR2_PACKAGE_JBIG2DEC is not set
BR2_PACKAGE_JPEG_SIMD_SUPPORT=y
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_KMSXX is not set
# BR2_PACKAGE_LCMS2 is not set
# BR2_PACKAGE_LENSFUN is not set
# BR2_PACKAGE_LEPTONICA is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBDMTX is not set
# BR2_PACKAGE_LIBDRM is not set

#
# libepoxy needs an OpenGL and/or OpenGL EGL backend
#
# BR2_PACKAGE_LIBEXIF is not set

#
# libfm needs X.org and a toolchain w/ wchar, threads, C++, gcc >= 4.9
#
# BR2_PACKAGE_LIBFM_EXTRA is not set

#
# libfreeglut depends on X.org and needs an OpenGL backend
#
# BR2_PACKAGE_LIBFREEIMAGE is not set
# BR2_PACKAGE_LIBGEOTIFF is not set

#
# libglew depends on X.org and needs an OpenGL backend
#

#
# libglfw depends on X.org or Wayland and an OpenGL or GLES backend
#

#
# libglu needs an OpenGL backend
#
# BR2_PACKAGE_LIBGTA is not set

#
# libgtk3 needs an OpenGL or an OpenGL-EGL/wayland backend
#
# BR2_PACKAGE_LIBJXL is not set
# BR2_PACKAGE_LIBMEDIAART is not set
# BR2_PACKAGE_LIBMNG is not set
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBQRENCODE is not set
# BR2_PACKAGE_LIBRAW is not set
# BR2_PACKAGE_LIBSVG is not set
# BR2_PACKAGE_LIBSVG_CAIRO is not set
# BR2_PACKAGE_LIBSVGTINY is not set
# BR2_PACKAGE_LIBVA is not set
# BR2_PACKAGE_LIBVIPS is not set

#
# libwpe needs a toolchain w/ C++, dynamic library and an OpenEGL-capable backend
#
# BR2_PACKAGE_MENU_CACHE is not set
# BR2_PACKAGE_OPENCV3 is not set
# BR2_PACKAGE_OPENCV4 is not set
# BR2_PACKAGE_OPENJPEG is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_PANGOMM is not set
# BR2_PACKAGE_PANGOMM2_46 is not set
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_POPPLER is not set
# BR2_PACKAGE_STB is not set
# BR2_PACKAGE_TIFF is not set
# BR2_PACKAGE_WAYLAND is not set
BR2_PACKAGE_WEBKITGTK_ARCH_SUPPORTS=y

#
# webkitgtk needs libgtk3 and a toolchain w/ C++, wchar, threads, dynamic library, gcc >= 9, host gcc >= 4.9
#
# BR2_PACKAGE_WEBP is not set

#
# wlroots needs udev, EGL w/ Wayland backend and OpenGL ES support
#
# BR2_PACKAGE_WOFF2 is not set

#
# wpebackend-fdo needs a toolchain w/ C++, wchar, threads, dynamic library and an OpenEGL-capable Wayland backend
#
BR2_PACKAGE_WPEWEBKIT_ARCH_SUPPORTS=y

#
# wpewebkit needs a toolchain w/ C++, wchar, threads, dynamic library, gcc >= 9, host gcc >= 4.9
#

#
# wpewebkit needs an OpenGL ES w/ EGL-capable Wayland backend
#
# BR2_PACKAGE_ZBAR is not set
# BR2_PACKAGE_ZXING_CPP is not set

#
# Hardware handling
#
# BR2_PACKAGE_ACSCCID is not set
# BR2_PACKAGE_BCM2835 is not set
# BR2_PACKAGE_C_PERIPHERY is not set
# BR2_PACKAGE_CCID is not set
BR2_PACKAGE_DTC=y
BR2_PACKAGE_DTC_PROGRAMS=y
BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS=y
# BR2_PACKAGE_GNU_EFI is not set
# BR2_PACKAGE_HACKRF is not set

#
# hidapi needs udev /dev management and a toolchain w/ NPTL, threads, gcc >= 4.9
#
# BR2_PACKAGE_JITTERENTROPY_LIBRARY is not set
# BR2_PACKAGE_LCDAPI is not set
# BR2_PACKAGE_LET_ME_CREATE is not set
# BR2_PACKAGE_LIBAIO is not set

#
# libatasmart requires udev to be enabled
#

#
# libblockdev needs udev /dev management and a toolchain w/ wchar, threads, dynamic library, locale
#
# BR2_PACKAGE_LIBCEC is not set
# BR2_PACKAGE_LIBFREEFARE is not set
# BR2_PACKAGE_LIBFTDI is not set
# BR2_PACKAGE_LIBFTDI1 is not set
# BR2_PACKAGE_LIBGPHOTO2 is not set
# BR2_PACKAGE_LIBGPIOD is not set

#
# libgudev needs udev /dev handling and a toolchain w/ wchar, threads
#
# BR2_PACKAGE_LIBHID is not set
# BR2_PACKAGE_LIBIIO is not set

#
# libinput needs udev /dev management
#
# BR2_PACKAGE_LIBIQRF is not set
# BR2_PACKAGE_LIBLLCP is not set
# BR2_PACKAGE_LIBMBIM is not set
# BR2_PACKAGE_LIBNFC is not set
# BR2_PACKAGE_LIBPCIACCESS is not set
# BR2_PACKAGE_LIBPHIDGET is not set

#
# libpri needs a Linux kernel to be built
#
# BR2_PACKAGE_LIBQMI is not set
# BR2_PACKAGE_LIBQRTR_GLIB is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_LIBRTLSDR is not set
# BR2_PACKAGE_LIBSERIAL is not set
# BR2_PACKAGE_LIBSERIALPORT is not set

#
# libsigrok needs a toolchain w/ wchar, locale, threads, dynamic library, gcc >= 4.7
#
# BR2_PACKAGE_LIBSIGROKDECODE is not set
# BR2_PACKAGE_LIBSOC is not set

#
# libss7 needs a Linux kernel to be built
#
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LIBUSBGX is not set
BR2_PACKAGE_LIBV4L=y

#
# libv4l JPEG support not enabled
#
BR2_PACKAGE_LIBV4L_UTILS=y
# BR2_PACKAGE_LIBXKBCOMMON is not set
BR2_PACKAGE_MRAA_ARCH_SUPPORTS=y
# BR2_PACKAGE_MRAA is not set
# BR2_PACKAGE_MTDEV is not set
# BR2_PACKAGE_NEARDAL is not set
# BR2_PACKAGE_OPENSC is not set
# BR2_PACKAGE_OWFS is not set
# BR2_PACKAGE_PCSC_LITE is not set
# BR2_PACKAGE_RPI_RGB_LED_MATRIX is not set
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_UHD is not set
# BR2_PACKAGE_URG is not set

#
# Javascript
#
# BR2_PACKAGE_ANGULARJS is not set
# BR2_PACKAGE_BOOTSTRAP is not set
# BR2_PACKAGE_CHARTJS is not set
# BR2_PACKAGE_DATATABLES is not set
# BR2_PACKAGE_DUKTAPE is not set
# BR2_PACKAGE_EXPLORERCANVAS is not set
# BR2_PACKAGE_FLOT is not set
# BR2_PACKAGE_FORGE is not set
# BR2_PACKAGE_JQUERY is not set
# BR2_PACKAGE_JSMIN is not set
# BR2_PACKAGE_JSON_JAVASCRIPT is not set
# BR2_PACKAGE_JSZIP is not set
# BR2_PACKAGE_OPENLAYERS is not set
# BR2_PACKAGE_POPPERJS is not set
# BR2_PACKAGE_VIS_NETWORK is not set
# BR2_PACKAGE_VUEJS is not set

#
# JSON/XML
#
# BR2_PACKAGE_BENEJSON is not set
# BR2_PACKAGE_CJSON is not set
BR2_PACKAGE_EXPAT=y
# BR2_PACKAGE_JANSSON is not set
# BR2_PACKAGE_JOSE is not set
# BR2_PACKAGE_JSMN is not set
# BR2_PACKAGE_JSON_C is not set
# BR2_PACKAGE_JSON_FOR_MODERN_CPP is not set
# BR2_PACKAGE_JSON_GLIB is not set
# BR2_PACKAGE_JSONCPP is not set
# BR2_PACKAGE_LIBBSON is not set
# BR2_PACKAGE_LIBFASTJSON is not set
# BR2_PACKAGE_LIBJSON is not set
# BR2_PACKAGE_LIBROXML is not set
# BR2_PACKAGE_LIBUCL is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXMLPP is not set
# BR2_PACKAGE_LIBXMLRPC is not set
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_LIBYAML is not set
# BR2_PACKAGE_MXML is not set
# BR2_PACKAGE_PUGIXML is not set
# BR2_PACKAGE_RAPIDJSON is not set
# BR2_PACKAGE_RAPIDXML is not set
# BR2_PACKAGE_RAPTOR is not set
# BR2_PACKAGE_SERD is not set
# BR2_PACKAGE_SORD is not set
# BR2_PACKAGE_TINYXML is not set
# BR2_PACKAGE_TINYXML2 is not set
# BR2_PACKAGE_VALIJSON is not set
# BR2_PACKAGE_XERCES is not set
# BR2_PACKAGE_XML_SECURITY_C is not set
# BR2_PACKAGE_YAJL is not set
# BR2_PACKAGE_YAML_CPP is not set

#
# Logging
#
# BR2_PACKAGE_GLOG is not set
# BR2_PACKAGE_HAWKTRACER is not set
# BR2_PACKAGE_LIBLOG4C_LOCALTIME is not set
# BR2_PACKAGE_LIBLOGGING is not set
# BR2_PACKAGE_LOG4CPLUS is not set
# BR2_PACKAGE_LOG4CPP is not set
# BR2_PACKAGE_LOG4CXX is not set

#
# log4qt needs qt5
#
# BR2_PACKAGE_OPENTRACING_CPP is not set
# BR2_PACKAGE_SPDLOG is not set
# BR2_PACKAGE_ULOG is not set
# BR2_PACKAGE_ZLOG is not set

#
# Multimedia
#
# BR2_PACKAGE_BENTO4 is not set
# BR2_PACKAGE_BITSTREAM is not set
# BR2_PACKAGE_DAV1D is not set
# BR2_PACKAGE_KVAZAAR is not set
# BR2_PACKAGE_LIBAACS is not set
# BR2_PACKAGE_LIBASS is not set
# BR2_PACKAGE_LIBBDPLUS is not set
# BR2_PACKAGE_LIBBLURAY is not set
BR2_PACKAGE_LIBCAMERA_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBCAMERA is not set
# BR2_PACKAGE_LIBCAMERA_APPS is not set
# BR2_PACKAGE_LIBDVBCSA is not set
# BR2_PACKAGE_LIBDVBPSI is not set
# BR2_PACKAGE_LIBDVBSI is not set
# BR2_PACKAGE_LIBDVDCSS is not set
# BR2_PACKAGE_LIBDVDNAV is not set
# BR2_PACKAGE_LIBDVDREAD is not set
# BR2_PACKAGE_LIBEBML is not set
# BR2_PACKAGE_LIBHDHOMERUN is not set

#
# libimxvpuapi needs an i.MX platform with VPU support
#
# BR2_PACKAGE_LIBMATROSKA is not set
# BR2_PACKAGE_LIBMMS is not set
# BR2_PACKAGE_LIBMPEG2 is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBOPENAPTX is not set
BR2_PACKAGE_LIBOPENH264_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBOPENH264 is not set
# BR2_PACKAGE_LIBOPUSENC is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIBUDFREAD is not set
# BR2_PACKAGE_LIBVPX is not set
# BR2_PACKAGE_LIBYUV is not set
# BR2_PACKAGE_LIVE555 is not set
# BR2_PACKAGE_MEDIASTREAMER is not set
# BR2_PACKAGE_X264 is not set
# BR2_PACKAGE_X265 is not set

#
# Networking
#
# BR2_PACKAGE_AGENTPP is not set
# BR2_PACKAGE_AZMQ is not set
# BR2_PACKAGE_AZURE_IOT_SDK_C is not set

#
# batman-adv needs a Linux kernel to be built
#
# BR2_PACKAGE_BELLE_SIP is not set
# BR2_PACKAGE_C_ARES is not set
# BR2_PACKAGE_CGIC is not set

#
# cni-plugins needs a glibc or musl toolchain w/ threads
#
# BR2_PACKAGE_CPPZMQ is not set
# BR2_PACKAGE_CURLPP is not set
# BR2_PACKAGE_CZMQ is not set
# BR2_PACKAGE_DAQ is not set
# BR2_PACKAGE_DAQ3 is not set
# BR2_PACKAGE_DAVICI is not set
# BR2_PACKAGE_DHT is not set
# BR2_PACKAGE_ENET is not set
# BR2_PACKAGE_FILEMQ is not set
# BR2_PACKAGE_FLICKCURL is not set
# BR2_PACKAGE_FREERADIUS_CLIENT is not set
# BR2_PACKAGE_GENSIO is not set
# BR2_PACKAGE_GEOIP is not set
# BR2_PACKAGE_GLIB_NETWORKING is not set
# BR2_PACKAGE_GRPC is not set
# BR2_PACKAGE_GSSDP is not set
# BR2_PACKAGE_GUPNP is not set
# BR2_PACKAGE_GUPNP_AV is not set
# BR2_PACKAGE_GUPNP_DLNA is not set
# BR2_PACKAGE_IBRCOMMON is not set
# BR2_PACKAGE_IBRDTN is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
# BR2_PACKAGE_LIBCOAP is not set

#
# libcpprestsdk needs a toolchain w/ NPTL, C++, wchar, locale
#
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBEST is not set
# BR2_PACKAGE_LIBFCGI is not set
# BR2_PACKAGE_LIBGSASL is not set
# BR2_PACKAGE_LIBHTP is not set
# BR2_PACKAGE_LIBHTTPPARSER is not set
# BR2_PACKAGE_LIBHTTPSERVER is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBIDN2 is not set
# BR2_PACKAGE_LIBISCSI is not set
# BR2_PACKAGE_LIBKRB5 is not set
# BR2_PACKAGE_LIBLDNS is not set
# BR2_PACKAGE_LIBMAXMINDDB is not set
# BR2_PACKAGE_LIBMBUS is not set
# BR2_PACKAGE_LIBMEMCACHED is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_LIBMINIUPNPC is not set
# BR2_PACKAGE_LIBMNL is not set
# BR2_PACKAGE_LIBMODBUS is not set
# BR2_PACKAGE_LIBMODSECURITY is not set
# BR2_PACKAGE_LIBNATPMP is not set
# BR2_PACKAGE_LIBNDP is not set
# BR2_PACKAGE_LIBNET is not set
# BR2_PACKAGE_LIBNETCONF2 is not set
# BR2_PACKAGE_LIBNETFILTER_ACCT is not set
# BR2_PACKAGE_LIBNETFILTER_CONNTRACK is not set
# BR2_PACKAGE_LIBNETFILTER_CTHELPER is not set
# BR2_PACKAGE_LIBNETFILTER_CTTIMEOUT is not set
# BR2_PACKAGE_LIBNETFILTER_LOG is not set
# BR2_PACKAGE_LIBNETFILTER_QUEUE is not set
# BR2_PACKAGE_LIBNFNETLINK is not set
# BR2_PACKAGE_LIBNFTNL is not set
# BR2_PACKAGE_LIBNICE is not set
# BR2_PACKAGE_LIBNIDS is not set
BR2_PACKAGE_LIBNL=y
# BR2_PACKAGE_LIBNL_TOOLS is not set
# BR2_PACKAGE_LIBNPUPNP is not set
# BR2_PACKAGE_LIBOAUTH is not set
# BR2_PACKAGE_LIBOPING is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBPAGEKITE is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBPJSIP is not set
# BR2_PACKAGE_LIBPSL is not set
# BR2_PACKAGE_LIBRELP is not set
# BR2_PACKAGE_LIBRSYNC is not set
# BR2_PACKAGE_LIBSHAIRPLAY is not set
# BR2_PACKAGE_LIBSHOUT is not set
# BR2_PACKAGE_LIBSOCKETCAN is not set
# BR2_PACKAGE_LIBSOUP is not set
# BR2_PACKAGE_LIBSRTP is not set
# BR2_PACKAGE_LIBSTROPHE is not set
# BR2_PACKAGE_LIBTEAM is not set
# BR2_PACKAGE_LIBTELNET is not set
BR2_PACKAGE_LIBTIRPC=y
# BR2_PACKAGE_LIBTIRPC_GSS is not set
# BR2_PACKAGE_LIBTORRENT is not set
# BR2_PACKAGE_LIBTORRENT_RASTERBAR is not set
# BR2_PACKAGE_LIBUEV is not set
# BR2_PACKAGE_LIBUHTTPD is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LIBUPNPP is not set
# BR2_PACKAGE_LIBURIPARSER is not set
# BR2_PACKAGE_LIBUTP is not set
# BR2_PACKAGE_LIBUWSC is not set
# BR2_PACKAGE_LIBVNCSERVER is not set
# BR2_PACKAGE_LIBWEBSOCK is not set
# BR2_PACKAGE_LIBWEBSOCKETS is not set
# BR2_PACKAGE_LIBYANG is not set
# BR2_PACKAGE_LKSCTP_TOOLS is not set
# BR2_PACKAGE_MBUFFER is not set
# BR2_PACKAGE_MONGOOSE is not set
# BR2_PACKAGE_NANOMSG is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_NETOPEER2 is not set
# BR2_PACKAGE_NGHTTP2 is not set
# BR2_PACKAGE_NORM is not set

#
# nss-myhostname needs a glibc toolchain
#

#
# nss-pam-ldapd needs a glibc toolchain
#
# BR2_PACKAGE_OMNIORB is not set
# BR2_PACKAGE_OPEN_ISNS is not set
# BR2_PACKAGE_OPEN62541 is not set
# BR2_PACKAGE_OPENLDAP is not set
# BR2_PACKAGE_OPENMPI is not set
# BR2_PACKAGE_OPENPGM is not set
# BR2_PACKAGE_OPENZWAVE is not set
# BR2_PACKAGE_ORTP is not set
# BR2_PACKAGE_PAHO_MQTT_C is not set
# BR2_PACKAGE_PAHO_MQTT_CPP is not set
# BR2_PACKAGE_PISTACHE is not set
# BR2_PACKAGE_QDECODER is not set
# BR2_PACKAGE_QPID_PROTON is not set
# BR2_PACKAGE_RABBITMQ_C is not set
# BR2_PACKAGE_RESIPROCATE is not set
# BR2_PACKAGE_RESTCLIENT_CPP is not set
# BR2_PACKAGE_RTMPDUMP is not set
# BR2_PACKAGE_SIPROXD is not set
# BR2_PACKAGE_SLIRP is not set
# BR2_PACKAGE_SLIRP4NETNS is not set
# BR2_PACKAGE_SNMPPP is not set
# BR2_PACKAGE_SOFIA_SIP is not set
# BR2_PACKAGE_SSCEP is not set
# BR2_PACKAGE_SYSREPO is not set
# BR2_PACKAGE_THRIFT is not set
# BR2_PACKAGE_USBREDIR is not set
# BR2_PACKAGE_WAMPCC is not set
# BR2_PACKAGE_WEBSOCKETPP is not set
# BR2_PACKAGE_ZEROMQ is not set
# BR2_PACKAGE_ZMQPP is not set
# BR2_PACKAGE_ZYRE is not set

#
# Other
#

#
# ACE needs a glibc toolchain, dynamic library, C++, gcc >= 4.8
#
# BR2_PACKAGE_APR is not set
# BR2_PACKAGE_APR_UTIL is not set
BR2_PACKAGE_ARGP_STANDALONE=y
# BR2_PACKAGE_ARMADILLO is not set
# BR2_PACKAGE_ATF is not set
# BR2_PACKAGE_AVRO_C is not set
# BR2_PACKAGE_BCTOOLBOX is not set
# BR2_PACKAGE_BDWGC is not set
# BR2_PACKAGE_BELR is not set
# BR2_PACKAGE_BOOST is not set
# BR2_PACKAGE_C_CAPNPROTO is not set
# BR2_PACKAGE_CAPNPROTO is not set
# BR2_PACKAGE_CATCH2 is not set
# BR2_PACKAGE_CCTZ is not set
# BR2_PACKAGE_CEREAL is not set
# BR2_PACKAGE_CLANG is not set
BR2_PACKAGE_CMOCKA=y

#
# compiler-rt requires llvm to be enabled, a glibc toolchain, host gcc >= 5
#
# BR2_PACKAGE_CPPCMS is not set
# BR2_PACKAGE_CRACKLIB is not set
# BR2_PACKAGE_DAWGDIC is not set
# BR2_PACKAGE_DING_LIBS is not set
# BR2_PACKAGE_DOTCONF is not set
# BR2_PACKAGE_DOUBLE_CONVERSION is not set
# BR2_PACKAGE_EIGEN is not set
# BR2_PACKAGE_ELFUTILS is not set
# BR2_PACKAGE_ELL is not set
# BR2_PACKAGE_FFTW is not set
# BR2_PACKAGE_FLANN is not set
# BR2_PACKAGE_FLATBUFFERS is not set
# BR2_PACKAGE_FLATCC is not set
# BR2_PACKAGE_FXDIV is not set
# BR2_PACKAGE_GCONF is not set
# BR2_PACKAGE_GDAL is not set
# BR2_PACKAGE_GFLAGS is not set
# BR2_PACKAGE_GLI is not set
# BR2_PACKAGE_GLIBMM is not set
# BR2_PACKAGE_GLIBMM2_66 is not set
# BR2_PACKAGE_GLM is not set
BR2_PACKAGE_GMP=y
BR2_PACKAGE_GOBJECT_INTROSPECTION_ARCH_SUPPORTS=y

#
# gobject-introspection needs a glibc toolchain, gcc >= 4.9, host gcc >= 8
#
# BR2_PACKAGE_GSL is not set
# BR2_PACKAGE_GTEST is not set
# BR2_PACKAGE_GUMBO_PARSER is not set
# BR2_PACKAGE_HIGHWAY is not set
BR2_PACKAGE_JEMALLOC_ARCH_SUPPORTS=y
# BR2_PACKAGE_JEMALLOC is not set
BR2_PACKAGE_LAPACK_ARCH_SUPPORTS=y

#
# lapack/blas needs a toolchain w/ fortran
#
BR2_PACKAGE_LIBABSEIL_CPP_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBABSEIL_CPP is not set
# BR2_PACKAGE_LIBARGTABLE2 is not set
BR2_PACKAGE_LIBATOMIC_OPS_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBATOMIC_OPS is not set
# BR2_PACKAGE_LIBAVL is not set
# BR2_PACKAGE_LIBB64 is not set
# BR2_PACKAGE_LIBBACKTRACE is not set
BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBBSD is not set
# BR2_PACKAGE_LIBBYTESIZE is not set
# BR2_PACKAGE_LIBCAP is not set
# BR2_PACKAGE_LIBCAP_NG is not set

#
# libcgroup needs a glibc toolchain w/ C++
#
# BR2_PACKAGE_LIBCLC is not set
# BR2_PACKAGE_LIBCOFI is not set
# BR2_PACKAGE_LIBCORRECT is not set
# BR2_PACKAGE_LIBCROSSGUID is not set
# BR2_PACKAGE_LIBCSV is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBDILL is not set
# BR2_PACKAGE_LIBEE is not set
# BR2_PACKAGE_LIBEV is not set
# BR2_PACKAGE_LIBEVDEV is not set
BR2_PACKAGE_LIBEVENT=y
# BR2_PACKAGE_LIBEXECINFO is not set
BR2_PACKAGE_LIBFFI=y
# BR2_PACKAGE_LIBFUTILS is not set
# BR2_PACKAGE_LIBGEE is not set
# BR2_PACKAGE_LIBGEOS is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_LIBGLOB is not set
# BR2_PACKAGE_LIBICAL is not set
# BR2_PACKAGE_LIBITE is not set
# BR2_PACKAGE_LIBKS is not set
# BR2_PACKAGE_LIBLINEAR is not set
# BR2_PACKAGE_LIBLOKI is not set
BR2_PACKAGE_LIBNPTH=y
BR2_PACKAGE_LIBNSPR_ARCH_SUPPORT=y
# BR2_PACKAGE_LIBNSPR is not set
# BR2_PACKAGE_LIBOSMIUM is not set

#
# libpeas needs a glibc toolchain, gcc >= 4.9, host gcc >= 8
#
# BR2_PACKAGE_LIBPFM4 is not set
# BR2_PACKAGE_LIBPLIST is not set
# BR2_PACKAGE_LIBPTHREAD_STUBS is not set
# BR2_PACKAGE_LIBPTHSEM is not set
# BR2_PACKAGE_LIBPWQUALITY is not set
# BR2_PACKAGE_LIBQB is not set
BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBSECCOMP is not set
# BR2_PACKAGE_LIBSHDATA is not set
# BR2_PACKAGE_LIBSIGC is not set
# BR2_PACKAGE_LIBSIGC2 is not set
BR2_PACKAGE_LIBSIGSEGV_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBSIGSEGV is not set
# BR2_PACKAGE_LIBSOLV is not set
# BR2_PACKAGE_LIBSPATIALINDEX is not set
# BR2_PACKAGE_LIBTALLOC is not set
BR2_PACKAGE_LIBTASN1=y
# BR2_PACKAGE_LIBTOMMATH is not set
# BR2_PACKAGE_LIBTPL is not set
# BR2_PACKAGE_LIBUBOX is not set
# BR2_PACKAGE_LIBUCI is not set
BR2_PACKAGE_LIBUNWIND_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBUNWIND is not set
BR2_PACKAGE_LIBURCU_ARCH_SUPPORTS=y
# BR2_PACKAGE_LIBURCU is not set
# BR2_PACKAGE_LIBURING is not set
# BR2_PACKAGE_LIBUV is not set
# BR2_PACKAGE_LIGHTNING is not set

#
# linux-pam needs a toolchain w/ wchar, locale, dynamic library
#

#
# liquid-dsp requires a glibc or musl toolchain w/ dynamic library
#
BR2_PACKAGE_LLVM_ARCH_SUPPORTS=y
BR2_PACKAGE_LLVM_TARGET_ARCH="ARM"
# BR2_PACKAGE_LLVM is not set
# BR2_PACKAGE_LTTNG_LIBUST is not set
# BR2_PACKAGE_MATIO is not set
# BR2_PACKAGE_MPC is not set
# BR2_PACKAGE_MPDECIMAL is not set
# BR2_PACKAGE_MPFR is not set
# BR2_PACKAGE_MPIR is not set
# BR2_PACKAGE_MSGPACK is not set
# BR2_PACKAGE_MUSL_FTS is not set
# BR2_PACKAGE_NEON_2_SSE is not set
BR2_PACKAGE_OPENBLAS_DEFAULT_TARGET="ARMV7"
BR2_PACKAGE_OPENBLAS_ARCH_SUPPORTS=y
# BR2_PACKAGE_OPENBLAS is not set
# BR2_PACKAGE_ORC is not set
# BR2_PACKAGE_P11_KIT is not set
BR2_PACKAGE_POCO_ARCH_SUPPORTS=y
# BR2_PACKAGE_POCO is not set
BR2_PACKAGE_HOST_PROTOBUF_ARCH_SUPPORTS=y
BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS=y
# BR2_PACKAGE_PROTOBUF is not set
# BR2_PACKAGE_PROTOBUF_C is not set
# BR2_PACKAGE_PROTOZERO is not set
# BR2_PACKAGE_QHULL is not set
# BR2_PACKAGE_QLIBC is not set
# BR2_PACKAGE_REPROC is not set
# BR2_PACKAGE_RIEMANN_C_CLIENT is not set
# BR2_PACKAGE_SHAPELIB is not set
# BR2_PACKAGE_SKALIBS is not set
# BR2_PACKAGE_SPHINXBASE is not set

#
# tbb needs a glibc or musl toolchain w/ dynamic library, threads, C++
#
# BR2_PACKAGE_TINYCBOR is not set
# BR2_PACKAGE_TL_EXPECTED is not set
# BR2_PACKAGE_UVW is not set
# BR2_PACKAGE_VOLK is not set
# BR2_PACKAGE_XAPIAN is not set

#
# Security
#
# BR2_PACKAGE_LIBAPPARMOR is not set
# BR2_PACKAGE_LIBSELINUX is not set
# BR2_PACKAGE_LIBSEMANAGE is not set
# BR2_PACKAGE_LIBSEPOL is not set
# BR2_PACKAGE_SAFECLIB is not set
# BR2_PACKAGE_SOFTHSM2 is not set

#
# Text and terminal handling
#
# BR2_PACKAGE_AUGEAS is not set
# BR2_PACKAGE_CLI11 is not set
# BR2_PACKAGE_DOCOPT_CPP is not set
# BR2_PACKAGE_ENCHANT is not set
# BR2_PACKAGE_FMT is not set
# BR2_PACKAGE_FSTRCMP is not set
# BR2_PACKAGE_ICU is not set
# BR2_PACKAGE_INIH is not set
# BR2_PACKAGE_LIBCLI is not set
# BR2_PACKAGE_LIBEDIT is not set
# BR2_PACKAGE_LIBENCA is not set
# BR2_PACKAGE_LIBESTR is not set
# BR2_PACKAGE_LIBFRIBIDI is not set
BR2_PACKAGE_LIBICONV=y
# BR2_PACKAGE_LIBICONV_EXTRA_ENCODINGS is not set
# BR2_PACKAGE_LIBUNIBREAK is not set
BR2_PACKAGE_LIBUNISTRING=y
# BR2_PACKAGE_LINENOISE is not set
BR2_PACKAGE_NCURSES=y
# BR2_PACKAGE_NCURSES_WCHAR is not set
# BR2_PACKAGE_NCURSES_TARGET_PROGS is not set
BR2_PACKAGE_NCURSES_ADDITIONAL_TERMINFO=""
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_ONIGURUMA is not set
# BR2_PACKAGE_PCRE is not set
# BR2_PACKAGE_PCRE2 is not set
BR2_PACKAGE_POPT=y
# BR2_PACKAGE_RE2 is not set
BR2_PACKAGE_READLINE=y
# BR2_PACKAGE_READLINE_BRACKETED_PASTE is not set
# BR2_PACKAGE_SLANG is not set
# BR2_PACKAGE_TCLAP is not set
# BR2_PACKAGE_TERMCOLOR is not set
# BR2_PACKAGE_UTF8PROC is not set

#
# Mail
#
# BR2_PACKAGE_DOVECOT is not set
# BR2_PACKAGE_EXIM is not set
# BR2_PACKAGE_FETCHMAIL is not set
# BR2_PACKAGE_HEIRLOOM_MAILX is not set
# BR2_PACKAGE_LIBESMTP is not set
# BR2_PACKAGE_MSMTP is not set
# BR2_PACKAGE_MUTT is not set

#
# Miscellaneous
#
# BR2_PACKAGE_AESPIPE is not set
# BR2_PACKAGE_BC is not set
BR2_PACKAGE_BITCOIN_ARCH_SUPPORTS=y
# BR2_PACKAGE_BITCOIN is not set
# BR2_PACKAGE_CLAMAV is not set
# BR2_PACKAGE_COLLECTD is not set
# BR2_PACKAGE_COLLECTL is not set

#
# domoticz needs lua 5.3 and a toolchain w/ C++, gcc >= 6, NPTL, wchar, dynamic library
#
# BR2_PACKAGE_EMPTY is not set
# BR2_PACKAGE_GITLAB_RUNNER is not set
# BR2_PACKAGE_GNURADIO is not set
# BR2_PACKAGE_GOOGLEFONTDIRECTORY is not set

#
# gqrx needs qt5
#
# BR2_PACKAGE_GSETTINGS_DESKTOP_SCHEMAS is not set
# BR2_PACKAGE_HAVEGED is not set
# BR2_PACKAGE_LINUX_SYSCALL_SUPPORT is not set
# BR2_PACKAGE_MOBILE_BROADBAND_PROVIDER_INFO is not set
# BR2_PACKAGE_NETDATA is not set
# BR2_PACKAGE_PROJ is not set
BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET=y
# BR2_PACKAGE_QEMU is not set
# BR2_PACKAGE_QPDF is not set
# BR2_PACKAGE_RTL_433 is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set
# BR2_PACKAGE_SUNWAIT is not set
# BR2_PACKAGE_TASKD is not set
BR2_PACKAGE_XMRIG_ARCH_SUPPORTS=y

#
# xmrig needs a glibc or musl toolchain w/ NPTL, dynamic library, C++
#
# BR2_PACKAGE_XUTIL_UTIL_MACROS is not set
BR2_PACKAGE_Z3_ARCH_SUPPORTS=y

#
# Networking applications
#
# BR2_PACKAGE_AIRCRACK_NG is not set
# BR2_PACKAGE_ALFRED is not set
# BR2_PACKAGE_AOETOOLS is not set
# BR2_PACKAGE_APACHE is not set
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_ARP_SCAN is not set
# BR2_PACKAGE_ARPTABLES is not set
# BR2_PACKAGE_ASTERISK is not set
# BR2_PACKAGE_ATFTP is not set
# BR2_PACKAGE_AUTOSSH is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BABELD is not set
# BR2_PACKAGE_BANDWIDTHD is not set
# BR2_PACKAGE_BATCTL is not set
# BR2_PACKAGE_BCUSDK is not set
# BR2_PACKAGE_BIND is not set
# BR2_PACKAGE_BIRD is not set
# BR2_PACKAGE_BLUEZ5_UTILS is not set
# BR2_PACKAGE_BMON is not set
# BR2_PACKAGE_BMX7 is not set
# BR2_PACKAGE_BOINC is not set
# BR2_PACKAGE_BRCM_PATCHRAM_PLUS is not set
# BR2_PACKAGE_BRIDGE_UTILS is not set
# BR2_PACKAGE_BWM_NG is not set
# BR2_PACKAGE_C_ICAP is not set
# BR2_PACKAGE_CAN_UTILS is not set
# BR2_PACKAGE_CANNELLONI is not set

#
# casync needs a glibc toolchain
#
# BR2_PACKAGE_CFM is not set
# BR2_PACKAGE_CHRONY is not set
# BR2_PACKAGE_CIVETWEB is not set
# BR2_PACKAGE_CONNMAN is not set

#
# connman-gtk needs libgtk3 and a glibc or uClibc toolchain w/ wchar, threads, resolver, dynamic library
#
# BR2_PACKAGE_CONNTRACK_TOOLS is not set
# BR2_PACKAGE_CORKSCREW is not set
# BR2_PACKAGE_CRDA is not set
# BR2_PACKAGE_CTORRENT is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_DANTE is not set
# BR2_PACKAGE_DARKHTTPD is not set
# BR2_PACKAGE_DEHYDRATED is not set
# BR2_PACKAGE_DHCP is not set
BR2_PACKAGE_DHCPCD=y
BR2_PACKAGE_DHCPCD_ENABLE_PRIVSEP=y
# BR2_PACKAGE_DHCPDUMP is not set
BR2_PACKAGE_DNSMASQ=y
BR2_PACKAGE_DNSMASQ_TFTP=y
BR2_PACKAGE_DNSMASQ_DHCP=y
# BR2_PACKAGE_DNSMASQ_DNSSEC is not set
# BR2_PACKAGE_DNSMASQ_IDN is not set
# BR2_PACKAGE_DNSMASQ_CONNTRACK is not set
# BR2_PACKAGE_DRBD_UTILS is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_EASYFRAMES is not set
# BR2_PACKAGE_EBTABLES is not set

#
# ejabberd needs erlang, toolchain w/ C++
#
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_FAIFA is not set
# BR2_PACKAGE_FAIL2BAN is not set
# BR2_PACKAGE_FASTD is not set
# BR2_PACKAGE_FCGIWRAP is not set
# BR2_PACKAGE_FLANNEL is not set
# BR2_PACKAGE_FPING is not set

#
# freeradius-server needs a glibc toolchain w/ threads
#
# BR2_PACKAGE_FREESWITCH is not set
# BR2_PACKAGE_FRR is not set
# BR2_PACKAGE_GERBERA is not set
# BR2_PACKAGE_GESFTPSERVER is not set
# BR2_PACKAGE_GLOOX is not set
# BR2_PACKAGE_GLORYTUN is not set

#
# gupnp-tools needs libgtk3
#
# BR2_PACKAGE_HANS is not set
BR2_PACKAGE_HAPROXY_ARCH_SUPPORTS=y
# BR2_PACKAGE_HAPROXY is not set
# BR2_PACKAGE_HIAWATHA is not set
BR2_PACKAGE_HOSTAPD=y
BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP=y
BR2_PACKAGE_HOSTAPD_DRIVER_NL80211=y
# BR2_PACKAGE_HOSTAPD_DRIVER_WIRED is not set
BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS=y
BR2_PACKAGE_HOSTAPD_ACS=y
# BR2_PACKAGE_HOSTAPD_EAP is not set
# BR2_PACKAGE_HOSTAPD_WPS is not set
# BR2_PACKAGE_HOSTAPD_WPA3 is not set
BR2_PACKAGE_HOSTAPD_VLAN=y
BR2_PACKAGE_HOSTAPD_VLAN_DYNAMIC=y
BR2_PACKAGE_HOSTAPD_VLAN_NETLINK=y
# BR2_PACKAGE_HTPDATE is not set
# BR2_PACKAGE_HTTPING is not set
# BR2_PACKAGE_I2PD is not set
# BR2_PACKAGE_IBRDTN_TOOLS is not set
# BR2_PACKAGE_IBRDTND is not set
# BR2_PACKAGE_IFENSLAVE is not set
# BR2_PACKAGE_IFMETRIC is not set
# BR2_PACKAGE_IFPLUGD is not set
# BR2_PACKAGE_IFTOP is not set
# BR2_PACKAGE_IFUPDOWN is not set
BR2_PACKAGE_IFUPDOWN_SCRIPTS=y
# BR2_PACKAGE_IGD2_FOR_LINUX is not set

#
# igh-ethercat needs a Linux kernel to be built
#
# BR2_PACKAGE_IGMPPROXY is not set
# BR2_PACKAGE_INADYN is not set
# BR2_PACKAGE_IODINE is not set
# BR2_PACKAGE_IPCALC is not set
# BR2_PACKAGE_IPERF is not set
# BR2_PACKAGE_IPERF3 is not set
# BR2_PACKAGE_IPROUTE2 is not set
# BR2_PACKAGE_IPSET is not set
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_IPTRAF_NG is not set
# BR2_PACKAGE_IPUTILS is not set
# BR2_PACKAGE_IRSSI is not set
BR2_PACKAGE_IW=y
# BR2_PACKAGE_IWD is not set
# BR2_PACKAGE_JANUS_GATEWAY is not set
# BR2_PACKAGE_KEEPALIVED is not set
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_KNOCK is not set
# BR2_PACKAGE_KSMBD_TOOLS is not set
# BR2_PACKAGE_LEAFNODE2 is not set
# BR2_PACKAGE_LFT is not set
# BR2_PACKAGE_LFTP is not set
# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_LINKNX is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LINPHONE is not set
# BR2_PACKAGE_LINUX_ZIGBEE is not set
# BR2_PACKAGE_LINUXPTP is not set
# BR2_PACKAGE_LLDPD is not set
BR2_PACKAGE_LRZSZ=y
# BR2_PACKAGE_LYNX is not set
# BR2_PACKAGE_MACCHANGER is not set
# BR2_PACKAGE_MEMCACHED is not set
# BR2_PACKAGE_MII_DIAG is not set
# BR2_PACKAGE_MINI_SNMPD is not set
# BR2_PACKAGE_MINIDLNA is not set
# BR2_PACKAGE_MINISSDPD is not set
# BR2_PACKAGE_MJPG_STREAMER is not set
# BR2_PACKAGE_MODEM_MANAGER is not set
BR2_PACKAGE_MONGREL2_LIBC_SUPPORTS=y
# BR2_PACKAGE_MONGREL2 is not set
# BR2_PACKAGE_MOSH is not set
# BR2_PACKAGE_MOSQUITTO is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MRP is not set
# BR2_PACKAGE_MSTPD is not set
# BR2_PACKAGE_MTR is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
# BR2_PACKAGE_NDISC6 is not set
# BR2_PACKAGE_NET_TOOLS is not set
# BR2_PACKAGE_NETATALK is not set
# BR2_PACKAGE_NETCALC is not set
# BR2_PACKAGE_NETCAT is not set

#
# netcat-openbsd needs a glibc toolchain w/ dynamic library, threads, headers >= 3.12
#
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set

#
# NetworkManager needs udev /dev management and a glibc toolchain w/ headers >= 4.6, dynamic library, wchar, threads, gcc >= 4.9
#
# BR2_PACKAGE_NFACCT is not set
# BR2_PACKAGE_NFTABLES is not set
# BR2_PACKAGE_NGINX is not set
# BR2_PACKAGE_NGIRCD is not set
# BR2_PACKAGE_NGREP is not set
# BR2_PACKAGE_NLOAD is not set
# BR2_PACKAGE_NMAP is not set
# BR2_PACKAGE_NOIP is not set
BR2_PACKAGE_NTP=y
# BR2_PACKAGE_NTP_SNTP is not set
# BR2_PACKAGE_NTP_NTP_KEYGEN is not set
# BR2_PACKAGE_NTP_NTP_SHM_CLK is not set
BR2_PACKAGE_NTP_NTPD=y
# BR2_PACKAGE_NTP_NTPD_ATOM_PPS is not set
# BR2_PACKAGE_NTP_NTPDATE is not set
# BR2_PACKAGE_NTP_NTPDC is not set
# BR2_PACKAGE_NTP_NTPQ is not set
# BR2_PACKAGE_NTP_NTPSNMPD is not set
# BR2_PACKAGE_NTP_NTPTIME is not set
# BR2_PACKAGE_NTP_TICKADJ is not set
# BR2_PACKAGE_NTPSEC is not set
# BR2_PACKAGE_NUTTCP is not set
# BR2_PACKAGE_ODHCP6C is not set
# BR2_PACKAGE_ODHCPLOC is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPEN_ISCSI is not set
# BR2_PACKAGE_OPEN_LLDP is not set
# BR2_PACKAGE_OPEN_PLC_UTILS is not set
# BR2_PACKAGE_OPENOBEX is not set
# BR2_PACKAGE_OPENRESOLV is not set
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_OPENSSH_CLIENT=y
BR2_PACKAGE_OPENSSH_SERVER=y
BR2_PACKAGE_OPENSSH_KEY_UTILS=y
BR2_PACKAGE_OPENSSH_SANDBOX=y
# BR2_PACKAGE_OPENSWAN is not set
# BR2_PACKAGE_OPENVPN is not set
# BR2_PACKAGE_P910ND is not set
# BR2_PACKAGE_PARPROUTED is not set
# BR2_PACKAGE_PHIDGETWEBSERVICE is not set
# BR2_PACKAGE_PHYTOOL is not set
# BR2_PACKAGE_PIMD is not set
# BR2_PACKAGE_PIXIEWPS is not set
# BR2_PACKAGE_POUND is not set
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PRIVOXY is not set
# BR2_PACKAGE_PROFTPD is not set

#
# prosody needs the lua interpreter, dynamic library
#
# BR2_PACKAGE_PROXYCHAINS_NG is not set
# BR2_PACKAGE_PTPD is not set
# BR2_PACKAGE_PTPD2 is not set
# BR2_PACKAGE_PURE_FTPD is not set
# BR2_PACKAGE_PUTTY is not set
# BR2_PACKAGE_QUAGGA is not set
# BR2_PACKAGE_RADVD is not set
# BR2_PACKAGE_REAVER is not set
# BR2_PACKAGE_REDIR is not set
# BR2_PACKAGE_RP_PPPOE is not set
# BR2_PACKAGE_RPCBIND is not set
# BR2_PACKAGE_RSH_REDONE is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_RTORRENT is not set
# BR2_PACKAGE_RTPTOOLS is not set

#
# rygel needs python3 and a glibc toolchain w/ wchar, threads, gcc >= 4.9, host gcc >= 8
#
# BR2_PACKAGE_S6_DNS is not set
# BR2_PACKAGE_S6_NETWORKING is not set
BR2_PACKAGE_SAMBA4=y
# BR2_PACKAGE_SAMBA4_AD_DC is not set
# BR2_PACKAGE_SAMBA4_ADS is not set
# BR2_PACKAGE_SAMBA4_SMBTORTURE is not set
# BR2_PACKAGE_SCONESERVER is not set
# BR2_PACKAGE_SER2NET is not set
# BR2_PACKAGE_SHADOWSOCKS_LIBEV is not set
# BR2_PACKAGE_SHAIRPORT_SYNC is not set
# BR2_PACKAGE_SHELLINABOX is not set
# BR2_PACKAGE_SMCROUTE is not set
# BR2_PACKAGE_SNGREP is not set
# BR2_PACKAGE_SNMPCLITOOLS is not set
# BR2_PACKAGE_SNORT is not set
# BR2_PACKAGE_SNORT3 is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SOCKETCAND is not set
# BR2_PACKAGE_SOFTETHER is not set
# BR2_PACKAGE_SPAWN_FCGI is not set
# BR2_PACKAGE_SPICE_PROTOCOL is not set
# BR2_PACKAGE_SQUID is not set
# BR2_PACKAGE_SSDP_RESPONDER is not set
# BR2_PACKAGE_SSHGUARD is not set
# BR2_PACKAGE_SSHPASS is not set
# BR2_PACKAGE_SSLH is not set
# BR2_PACKAGE_STRONGSWAN is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_TCPING is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_TFTPD is not set
# BR2_PACKAGE_THTTPD is not set
# BR2_PACKAGE_TINC is not set
# BR2_PACKAGE_TINYPROXY is not set
# BR2_PACKAGE_TINYSSH is not set
# BR2_PACKAGE_TOR is not set
# BR2_PACKAGE_TRACEROUTE is not set
# BR2_PACKAGE_TRANSMISSION is not set
# BR2_PACKAGE_TUNCTL is not set
# BR2_PACKAGE_TVHEADEND is not set
# BR2_PACKAGE_UACME is not set
# BR2_PACKAGE_UDPCAST is not set
# BR2_PACKAGE_UFTP is not set
# BR2_PACKAGE_UHTTPD is not set
# BR2_PACKAGE_ULOGD is not set
# BR2_PACKAGE_UNBOUND is not set
# BR2_PACKAGE_UQMI is not set
# BR2_PACKAGE_UREDIR is not set
# BR2_PACKAGE_USHARE is not set
# BR2_PACKAGE_USSP_PUSH is not set
# BR2_PACKAGE_VDE2 is not set
# BR2_PACKAGE_VDR is not set
# BR2_PACKAGE_VNSTAT is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WAVEMON is not set
BR2_PACKAGE_WGET=y
# BR2_PACKAGE_WHOIS is not set

#
# wireguard-linux-compat needs a Linux kernel to be built
#
# BR2_PACKAGE_WIREGUARD_TOOLS is not set
# BR2_PACKAGE_WIRELESS_REGDB is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WIRESHARK is not set
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
BR2_PACKAGE_WPA_SUPPLICANT_WEXT=y
# BR2_PACKAGE_WPA_SUPPLICANT_WIRED is not set
# BR2_PACKAGE_WPA_SUPPLICANT_IBSS_RSN is not set
BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY=y
BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING=y
# BR2_PACKAGE_WPA_SUPPLICANT_OVERRIDES is not set
# BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN is not set
# BR2_PACKAGE_WPA_SUPPLICANT_EAP is not set
# BR2_PACKAGE_WPA_SUPPLICANT_HOTSPOT is not set
# BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG is not set
# BR2_PACKAGE_WPA_SUPPLICANT_WPS is not set
BR2_PACKAGE_WPA_SUPPLICANT_WPA3=y
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO=y
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
BR2_PACKAGE_WPA_SUPPLICANT_CTRL_IFACE=y
# BR2_PACKAGE_WPA_SUPPLICANT_DBUS is not set
# BR2_PACKAGE_WPAN_TOOLS is not set
# BR2_PACKAGE_XINETD is not set
# BR2_PACKAGE_XL2TP is not set

#
# xtables-addons needs a Linux kernel to be built
#

#
# zabbix need glibc
#
# BR2_PACKAGE_ZEEK is not set
# BR2_PACKAGE_ZNC is not set

#
# Package managers
#

#
# -------------------------------------------------------
#

#
# Please note:                                           
#

#
# - Buildroot does *not* generate binary packages,       
#

#
# - Buildroot does *not* install any package database.   
#

#
# *                                                      
#

#
# It is up to you to provide those by yourself if you    
#

#
# want to use any of those package managers.             
#

#
# *                                                      
#

#
# See the manual:                                        
#

#
# http://buildroot.org/manual.html#faq-no-binary-packages
#

#
# -------------------------------------------------------
#
BR2_PACKAGE_OPKG=y
BR2_PACKAGE_OPKG_GPG_SIGN=y
BR2_PACKAGE_OPKG_UTILS=y

#
# rpm needs a toolchain w/ dynamic library, threads and lua >= 5.3
#

#
# Real-Time
#
BR2_PACKAGE_XENOMAI_COBALT_ARCH_SUPPORTS=y
# BR2_PACKAGE_XENOMAI is not set

#
# Security
#
# BR2_PACKAGE_APPARMOR is not set
# BR2_PACKAGE_CHECKPOLICY is not set
# BR2_PACKAGE_IMA_EVM_UTILS is not set
# BR2_PACKAGE_OPTEE_BENCHMARK is not set
# BR2_PACKAGE_OPTEE_CLIENT is not set

#
# paxtest needs a glibc toolchain
#
# BR2_PACKAGE_POLICYCOREUTILS is not set
# BR2_PACKAGE_REFPOLICY is not set
# BR2_PACKAGE_RESTORECOND is not set
# BR2_PACKAGE_SELINUX_PYTHON is not set
# BR2_PACKAGE_SEMODULE_UTILS is not set
# BR2_PACKAGE_SETOOLS is not set
BR2_PACKAGE_URANDOM_SCRIPTS=y

#
# Shell and utilities
#

#
# Shells
#
BR2_PACKAGE_BASH=y
BR2_PACKAGE_BASH_LOADABLE_EXAMPLES=y
# BR2_PACKAGE_DASH is not set
# BR2_PACKAGE_MKSH is not set
# BR2_PACKAGE_ZSH is not set

#
# Utilities
#
# BR2_PACKAGE_APG is not set
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BASH_COMPLETION is not set
# BR2_PACKAGE_CATATONIT is not set
# BR2_PACKAGE_CCRYPT is not set
# BR2_PACKAGE_CRUDINI is not set
BR2_PACKAGE_DIALOG=y
# BR2_PACKAGE_DTACH is not set
# BR2_PACKAGE_EASY_RSA is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GNUPG is not set
BR2_PACKAGE_GNUPG2_DEPENDS=y
BR2_PACKAGE_GNUPG2=y
# BR2_PACKAGE_GNUPG2_GPGV is not set
# BR2_PACKAGE_INOTIFY_TOOLS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_LOGSURFER is not set
# BR2_PACKAGE_NEOFETCH is not set
# BR2_PACKAGE_PDMENU is not set
# BR2_PACKAGE_PINENTRY is not set
# BR2_PACKAGE_QPRINT is not set
# BR2_PACKAGE_RANGER is not set
# BR2_PACKAGE_RTTY is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SCREENFETCH is not set
# BR2_PACKAGE_SEXPECT is not set
# BR2_PACKAGE_SUDO is not set
BR2_PACKAGE_TIME=y
# BR2_PACKAGE_TINI is not set

#
# tmux needs a toolchain w/ wchar, locale
#
# BR2_PACKAGE_TTYD is not set
# BR2_PACKAGE_WHICH is not set
# BR2_PACKAGE_WTFUTIL is not set
# BR2_PACKAGE_XMLSTARLET is not set
# BR2_PACKAGE_XXHASH is not set
# BR2_PACKAGE_YTREE is not set

#
# System tools
#
# BR2_PACKAGE_ACL is not set
# BR2_PACKAGE_ANDROID_TOOLS is not set
# BR2_PACKAGE_ATOP is not set
# BR2_PACKAGE_ATTR is not set
BR2_PACKAGE_AUDIT_ARCH_SUPPORTS=y
# BR2_PACKAGE_AUDIT is not set

#
# balena-engine needs a glibc or musl toolchain w/ threads
#
# BR2_PACKAGE_BUBBLEWRAP is not set
# BR2_PACKAGE_CGROUPFS_MOUNT is not set
# BR2_PACKAGE_CIRCUS is not set

#
# containerd needs a glibc or musl toolchain w/ threads
#
# BR2_PACKAGE_COREUTILS is not set
# BR2_PACKAGE_CPULIMIT is not set
# BR2_PACKAGE_CPULOAD is not set

#
# crun needs a glibc or musl toolchain, gcc >= 4.9
#
# BR2_PACKAGE_DAEMON is not set
# BR2_PACKAGE_DC3DD is not set
# BR2_PACKAGE_DCRON is not set
# BR2_PACKAGE_DDRESCUE is not set
# BR2_PACKAGE_DEBIANUTILS is not set
# BR2_PACKAGE_DOCKER_CLI is not set

#
# docker-compose needs docker-cli and a toolchain w/ threads
#

#
# docker-engine needs a glibc or musl toolchain w/ threads, headers >= 3.17
#
# BR2_PACKAGE_EARLYOOM is not set
# BR2_PACKAGE_EFIBOOTMGR is not set
BR2_PACKAGE_EFIVAR_ARCH_SUPPORTS=y
# BR2_PACKAGE_EFIVAR is not set

#
# embiggen-disk needs a glibc or musl toolchain w/ threads
#

#
# emlog needs a Linux kernel to be built
#
# BR2_PACKAGE_FLUENT_BIT is not set
# BR2_PACKAGE_FTOP is not set
# BR2_PACKAGE_GETENT is not set
# BR2_PACKAGE_GKRELLM is not set
BR2_PACKAGE_HTOP=y
# BR2_PACKAGE_IBM_SW_TPM2 is not set
BR2_PACKAGE_INITSCRIPTS=y
# BR2_PACKAGE_IOTOP is not set
# BR2_PACKAGE_IPRUTILS is not set
# BR2_PACKAGE_IRQBALANCE is not set
# BR2_PACKAGE_KEYUTILS is not set
# BR2_PACKAGE_KMOD is not set

#
# kvmtool needs a glibc or musl toolchain w/ dynamic library
#
# BR2_PACKAGE_LIBOSTREE is not set

#
# lxc needs a glibc or musl toolchain w/ threads, headers >= 3.0, dynamic library, gcc >= 4.7
#
BR2_PACKAGE_MAKEDUMPFILE_ARCH_SUPPORTS=y
# BR2_PACKAGE_MAKEDUMPFILE is not set
# BR2_PACKAGE_MENDER is not set
# BR2_PACKAGE_MENDER_CONNECT is not set
# BR2_PACKAGE_MFOC is not set

#
# moby-buildkit needs a glibc or musl toolchain w/ threads
#
# BR2_PACKAGE_MONIT is not set

#
# multipath-tools needs udev and a uClibc or glibc toolchain w/ threads, dynamic library
#
# BR2_PACKAGE_NCDU is not set

#
# nerdctl needs a glibc or musl toolchain w/ threads
#

#
# netifrc needs openrc as init system
#
# BR2_PACKAGE_NUMACTL is not set
# BR2_PACKAGE_NUT is not set

#
# pamtester depends on linux-pam
#
# BR2_PACKAGE_POLKIT is not set
# BR2_PACKAGE_PROCPS_NG is not set
# BR2_PACKAGE_PROCRANK_LINUX is not set
# BR2_PACKAGE_PSMISC is not set
# BR2_PACKAGE_PWGEN is not set
# BR2_PACKAGE_QUOTA is not set
# BR2_PACKAGE_QUOTATOOL is not set
# BR2_PACKAGE_RAUC is not set
# BR2_PACKAGE_RSYSLOG is not set

#
# runc needs a glibc or musl toolchain w/ threads
#
# BR2_PACKAGE_S6 is not set
# BR2_PACKAGE_S6_LINUX_INIT is not set
# BR2_PACKAGE_S6_LINUX_UTILS is not set
# BR2_PACKAGE_S6_PORTABLE_UTILS is not set
# BR2_PACKAGE_S6_RC is not set
# BR2_PACKAGE_SCRUB is not set
# BR2_PACKAGE_SCRYPT is not set

#
# sdbus-c++ needs systemd and a toolchain w/ C++, gcc >= 7
#

#
# sdbusplus needs systemd and a toolchain w/ C++, gcc >= 7
#
# BR2_PACKAGE_SEATD is not set
# BR2_PACKAGE_SMACK is not set
# BR2_PACKAGE_START_STOP_DAEMON is not set
# BR2_PACKAGE_SUPERVISOR is not set
# BR2_PACKAGE_SWUPDATE is not set
# BR2_PACKAGE_SYSKLOGD is not set
# BR2_PACKAGE_SYSLOG_NG is not set
BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS=y
BR2_PACKAGE_SYSTEMD_BOOTCHART_ARCH_SUPPORTS=y
# BR2_PACKAGE_TAR is not set
# BR2_PACKAGE_TPM_TOOLS is not set
# BR2_PACKAGE_TPM2_ABRMD is not set

#
# tpm2-tools needs a glibc or musl toolchain w/ dynamic library, wchar
#
# BR2_PACKAGE_TPM2_TOTP is not set

#
# unscd needs a glibc toolchain
#
BR2_PACKAGE_UTIL_LINUX=y
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
# BR2_PACKAGE_UTIL_LINUX_LIBFDISK is not set
# BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set
# BR2_PACKAGE_UTIL_LINUX_LIBSMARTCOLS is not set
BR2_PACKAGE_UTIL_LINUX_LIBUUID=y
# BR2_PACKAGE_UTIL_LINUX_BINARIES is not set
# BR2_PACKAGE_UTIL_LINUX_AGETTY is not set
# BR2_PACKAGE_UTIL_LINUX_BFS is not set
# BR2_PACKAGE_UTIL_LINUX_CAL is not set

#
# chfn/chsh needs a toolchain w/ wchar, locale, dynamic library
#
# BR2_PACKAGE_UTIL_LINUX_CHMEM is not set
# BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set
# BR2_PACKAGE_UTIL_LINUX_EJECT is not set
# BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set
# BR2_PACKAGE_UTIL_LINUX_FDFORMAT is not set
# BR2_PACKAGE_UTIL_LINUX_FSCK is not set
# BR2_PACKAGE_UTIL_LINUX_HARDLINK is not set
# BR2_PACKAGE_UTIL_LINUX_HWCLOCK is not set
# BR2_PACKAGE_UTIL_LINUX_IPCMK is not set
# BR2_PACKAGE_UTIL_LINUX_IPCRM is not set
# BR2_PACKAGE_UTIL_LINUX_IPCS is not set
# BR2_PACKAGE_UTIL_LINUX_IRQTOP is not set
# BR2_PACKAGE_UTIL_LINUX_KILL is not set
# BR2_PACKAGE_UTIL_LINUX_LAST is not set
# BR2_PACKAGE_UTIL_LINUX_LINE is not set
# BR2_PACKAGE_UTIL_LINUX_LOGGER is not set

#
# login needs a uClibc or glibc toolchain w/ wchar, locale, dynamic library
#
# BR2_PACKAGE_UTIL_LINUX_LOSETUP is not set
# BR2_PACKAGE_UTIL_LINUX_LSFD is not set
# BR2_PACKAGE_UTIL_LINUX_LSLOGINS is not set
# BR2_PACKAGE_UTIL_LINUX_LSMEM is not set
# BR2_PACKAGE_UTIL_LINUX_MESG is not set
# BR2_PACKAGE_UTIL_LINUX_MINIX is not set
# BR2_PACKAGE_UTIL_LINUX_MORE is not set
# BR2_PACKAGE_UTIL_LINUX_MOUNT is not set
# BR2_PACKAGE_UTIL_LINUX_MOUNTPOINT is not set
# BR2_PACKAGE_UTIL_LINUX_NEWGRP is not set
# BR2_PACKAGE_UTIL_LINUX_NOLOGIN is not set
# BR2_PACKAGE_UTIL_LINUX_NSENTER is not set
# BR2_PACKAGE_UTIL_LINUX_PG is not set
# BR2_PACKAGE_UTIL_LINUX_PARTX is not set
# BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set
# BR2_PACKAGE_UTIL_LINUX_RAW is not set
# BR2_PACKAGE_UTIL_LINUX_RENAME is not set
# BR2_PACKAGE_UTIL_LINUX_RFKILL is not set

#
# runuser needs a uClibc or glibc toolchain w/ wchar, locale, dynamic library
#
# BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set
# BR2_PACKAGE_UTIL_LINUX_SETPRIV is not set
# BR2_PACKAGE_UTIL_LINUX_SETTERM is not set

#
# su needs a uClibc or glibc toolchain w/ wchar, locale, dynamic library
#
# BR2_PACKAGE_UTIL_LINUX_SULOGIN is not set
# BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set
# BR2_PACKAGE_UTIL_LINUX_TUNELP is not set
# BR2_PACKAGE_UTIL_LINUX_UL is not set
# BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set
# BR2_PACKAGE_UTIL_LINUX_UTMPDUMP is not set
# BR2_PACKAGE_UTIL_LINUX_UUIDD is not set
# BR2_PACKAGE_UTIL_LINUX_VIPW is not set
# BR2_PACKAGE_UTIL_LINUX_WALL is not set
# BR2_PACKAGE_UTIL_LINUX_WIPEFS is not set
# BR2_PACKAGE_UTIL_LINUX_WDCTL is not set
# BR2_PACKAGE_UTIL_LINUX_WRITE is not set
# BR2_PACKAGE_UTIL_LINUX_ZRAMCTL is not set
# BR2_PACKAGE_WATCHDOG is not set
# BR2_PACKAGE_WATCHDOGD is not set
# BR2_PACKAGE_XDG_DBUS_PROXY is not set
# BR2_PACKAGE_XEN is not set
BR2_PACKAGE_XVISOR_ARCH_SUPPORTS=y
# BR2_PACKAGE_XVISOR is not set

#
# Text editors and viewers
#
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_JOE is not set
# BR2_PACKAGE_LESS is not set
# BR2_PACKAGE_MC is not set
# BR2_PACKAGE_MG is not set
# BR2_PACKAGE_MOST is not set
BR2_PACKAGE_NANO=y
BR2_PACKAGE_NANO_TINY=y
# BR2_PACKAGE_UEMACS is not set
# BR2_PACKAGE_VIM is not set

#
# Filesystem images
#
# BR2_TARGET_ROOTFS_AXFS is not set
# BR2_TARGET_ROOTFS_BTRFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_EROFS is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
# BR2_TARGET_ROOTFS_F2FS is not set

#
# initramfs needs a Linux kernel to be built
#
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_OCI is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
BR2_TARGET_ROOTFS_TAR=y
BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_GZIP is not set
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZ4 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
# BR2_TARGET_ROOTFS_TAR_LZO is not set
# BR2_TARGET_ROOTFS_TAR_XZ is not set
# BR2_TARGET_ROOTFS_TAR_ZSTD is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
# BR2_TARGET_ROOTFS_UBI is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_YAFFS2 is not set

#
# Bootloaders
#
# BR2_TARGET_AFBOOT_STM32 is not set
# BR2_TARGET_AT91BOOTSTRAP3 is not set
# BR2_TARGET_ARM_TRUSTED_FIRMWARE is not set
# BR2_TARGET_BAREBOX is not set
BR2_TARGET_GRUB2_ARCH_SUPPORTS=y
# BR2_TARGET_GRUB2 is not set
# BR2_TARGET_OPTEE_OS is not set
# BR2_TARGET_S500_BOOTLOADER is not set
BR2_PACKAGE_SHIM_ARCH_SUPPORTS=y
# BR2_TARGET_SHIM is not set
# BR2_TARGET_UBOOT is not set

#
# Host utilities
#
# BR2_PACKAGE_HOST_ABOOTIMG is not set
# BR2_PACKAGE_HOST_AESPIPE is not set
# BR2_PACKAGE_HOST_AGENT_PROXY is not set
# BR2_PACKAGE_HOST_ANDROID_TOOLS is not set
# BR2_PACKAGE_HOST_ASN1C is not set
# BR2_PACKAGE_HOST_BABELTRACE2 is not set
# BR2_PACKAGE_HOST_BMAP_TOOLS is not set
# BR2_PACKAGE_HOST_BOOTGEN is not set
# BR2_PACKAGE_HOST_BTRFS_PROGS is not set
# BR2_PACKAGE_HOST_CBOOTIMAGE is not set
# BR2_PACKAGE_HOST_CHECKPOLICY is not set
# BR2_PACKAGE_HOST_CHECKSEC is not set
# BR2_PACKAGE_HOST_CMAKE is not set
BR2_HOST_CMAKE_AT_LEAST="3.18"
# BR2_PACKAGE_HOST_CRAMFS is not set
# BR2_PACKAGE_HOST_CRUDINI is not set
# BR2_PACKAGE_HOST_CRYPTSETUP is not set
# BR2_PACKAGE_HOST_DBUS_PYTHON is not set
# BR2_PACKAGE_HOST_DELVE is not set
# BR2_PACKAGE_HOST_DFU_UTIL is not set
# BR2_PACKAGE_HOST_DOS2UNIX is not set
# BR2_PACKAGE_HOST_DOSFSTOOLS is not set
# BR2_PACKAGE_HOST_DOXYGEN is not set
BR2_PACKAGE_HOST_DTC=y
# BR2_PACKAGE_HOST_E2FSPROGS is not set
# BR2_PACKAGE_HOST_E2TOOLS is not set
# BR2_PACKAGE_HOST_ENVIRONMENT_SETUP is not set
# BR2_PACKAGE_HOST_EROFS_UTILS is not set
# BR2_PACKAGE_HOST_EXFATPROGS is not set
# BR2_PACKAGE_HOST_F2FS_TOOLS is not set
# BR2_PACKAGE_HOST_FAKETIME is not set
# BR2_PACKAGE_HOST_FATCAT is not set
# BR2_PACKAGE_HOST_FIRMWARE_UTILS is not set
# BR2_PACKAGE_HOST_FWUP is not set
# BR2_PACKAGE_HOST_GENEXT2FS is not set
# BR2_PACKAGE_HOST_GENIMAGE is not set
# BR2_PACKAGE_HOST_GENPART is not set
# BR2_PACKAGE_HOST_GNUPG is not set
BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS=y
BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS=y
BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS=y
BR2_PACKAGE_HOST_GO_BOOTSTRAP_STAGE1_ARCH_SUPPORTS=y
BR2_PACKAGE_HOST_GO_BOOTSTRAP_STAGE2_ARCH_SUPPORTS=y
BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS=y
# BR2_PACKAGE_HOST_GPTFDISK is not set
# BR2_PACKAGE_HOST_IMAGEMAGICK is not set
# BR2_PACKAGE_HOST_IMX_MKIMAGE is not set
# BR2_PACKAGE_HOST_IMX_USB_LOADER is not set
# BR2_PACKAGE_HOST_JQ is not set
# BR2_PACKAGE_HOST_JSMIN is not set
# BR2_PACKAGE_HOST_KMOD is not set
# BR2_PACKAGE_HOST_LIBP11 is not set
# BR2_PACKAGE_HOST_LLD is not set
# BR2_PACKAGE_HOST_LPC3250LOADER is not set
# BR2_PACKAGE_HOST_LTTNG_BABELTRACE is not set
# BR2_PACKAGE_HOST_LZMA_ALONE is not set
# BR2_PACKAGE_HOST_MENDER_ARTIFACT is not set
# BR2_PACKAGE_HOST_MESON_TOOLS is not set
# BR2_PACKAGE_HOST_MFGTOOLS is not set
BR2_PACKAGE_HOST_MKPASSWD=y
# BR2_PACKAGE_HOST_MOBY_BUILDKIT is not set
# BR2_PACKAGE_HOST_MOSQUITTO is not set
# BR2_PACKAGE_HOST_MTD is not set
# BR2_PACKAGE_HOST_MTOOLS is not set
# BR2_PACKAGE_HOST_MXSLDR is not set
# BR2_PACKAGE_HOST_NODEJS is not set
# BR2_PACKAGE_HOST_ODB is not set
# BR2_PACKAGE_HOST_OMAP_U_BOOT_UTILS is not set
# BR2_PACKAGE_HOST_OPENOCD is not set
# BR2_PACKAGE_HOST_OPKG_UTILS is not set
# BR2_PACKAGE_HOST_PAHOLE is not set
# BR2_PACKAGE_HOST_PARTED is not set
BR2_PACKAGE_HOST_PATCHELF=y
# BR2_PACKAGE_HOST_PIGZ is not set
# BR2_PACKAGE_HOST_PKGCONF is not set
# BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT is not set
# BR2_PACKAGE_HOST_PWGEN is not set
# BR2_PACKAGE_HOST_PYTHON_CYTHON is not set
# BR2_PACKAGE_HOST_PYTHON_GREENLET is not set
# BR2_PACKAGE_HOST_PYTHON_INIPARSE is not set
# BR2_PACKAGE_HOST_PYTHON_LXML is not set
# BR2_PACKAGE_HOST_PYTHON_PYYAML is not set
# BR2_PACKAGE_HOST_PYTHON_SIX is not set
# BR2_PACKAGE_HOST_PYTHON_XLRD is not set
# BR2_PACKAGE_HOST_PYTHON3 is not set
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS=y
BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS=y
BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS=y
# BR2_PACKAGE_HOST_QEMU is not set
# BR2_PACKAGE_HOST_QORIQ_RCW is not set
# BR2_PACKAGE_HOST_RASPBERRYPI_USBBOOT is not set
# BR2_PACKAGE_HOST_RAUC is not set
# BR2_PACKAGE_HOST_RISCV_ISA_SIM is not set
# BR2_PACKAGE_HOST_RUNC is not set
BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS=y
BR2_PACKAGE_HOST_RUSTC_ARCH="armv7"
BR2_PACKAGE_HOST_RUSTC_ABI="eabihf"
# BR2_PACKAGE_HOST_RUSTC is not set
BR2_PACKAGE_PROVIDES_HOST_RUSTC="host-rust-bin"
# BR2_PACKAGE_HOST_SAM_BA is not set
# BR2_PACKAGE_HOST_SDBUSPLUS is not set
# BR2_PACKAGE_HOST_SENTRY_CLI is not set
# BR2_PACKAGE_HOST_SLOCI_IMAGE is not set
# BR2_PACKAGE_HOST_SQUASHFS is not set
# BR2_PACKAGE_HOST_SUNXI_TOOLS is not set
# BR2_PACKAGE_HOST_SWIG is not set
# BR2_PACKAGE_HOST_TEGRARCM is not set
BR2_PACKAGE_HOST_TI_CGT_PRU_ARCH_SUPPORTS=y
# BR2_PACKAGE_HOST_TI_CGT_PRU is not set
# BR2_PACKAGE_HOST_UBOOT_TOOLS is not set
# BR2_PACKAGE_HOST_UTIL_LINUX is not set
# BR2_PACKAGE_HOST_UTP_COM is not set
# BR2_PACKAGE_HOST_UUU is not set
# BR2_PACKAGE_HOST_VBOOT_UTILS is not set
# BR2_PACKAGE_HOST_XORRISO is not set
# BR2_PACKAGE_HOST_ZIP is not set
# BR2_PACKAGE_HOST_ZSTD is not set

#
# Legacy config options
#

#
# Legacy options removed in 2023.02
#
# BR2_PACKAGE_PUGIXML_HEADER_ONLY is not set
# BR2_PACKAGE_UCCP420WLAN is not set
# BR2_PACKAGE_IMX_GPU_G2D_EXAMPLES is not set
# BR2_KERNEL_HEADERS_6_0 is not set
# BR2_KERNEL_HEADERS_4_9 is not set
# BR2_PACKAGE_DOCKER_PROXY is not set
# BR2_PACKAGE_PYTHON_BUNCH is not set
# BR2_TARGET_GUMMIBOOT is not set
# BR2_PACKAGE_IPUTILS_NINFOD is not set
# BR2_PACKAGE_IPUTILS_RARPD is not set
# BR2_PACKAGE_IPUTILS_RDISC is not set
# BR2_PACKAGE_IPUTILS_RDISC_SERVER is not set
# BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_XINGMUX is not set
# BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOSCALE is not set
# BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOCONVERT is not set
# BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11 is not set
# BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV is not set
BR2_PACKAGE_QEMU_CUSTOM_TARGETS=""
# BR2_PACKAGE_XDRIVER_XF86_INPUT_KEYBOARD is not set
# BR2_TARGET_SUN20I_D1_SPL is not set
# BR2_PACKAGE_PYTHON_M2R is not set
# BR2_PACKAGE_MESA3D_XVMC is not set
# BR2_KERNEL_HEADERS_5_19 is not set
# BR2_PACKAGE_XDRIVER_XF86_VIDEO_TGA is not set
# BR2_PACKAGE_XDRIVER_XF86_VIDEO_GLINT is not set
# BR2_PACKAGE_USBREDIR_SERVER is not set

#
# Legacy options removed in 2022.11
#
# BR2_BINUTILS_VERSION_2_36_X is not set
# BR2_PACKAGE_RABBITMQ_SERVER is not set
# BR2_PACKAGE_LIBOPENSSL_ENABLE_RC5 is not set
# BR2_PACKAGE_LIBDCADEC is not set
# BR2_KERNEL_HEADERS_5_17 is not set
# BR2_iwmmxt is not set
# BR2_PACKAGE_UHD_N230 is not set
# BR2_PACKAGE_UHD_RFNOC is not set
# BR2_PACKAGE_GPSD_OLDSTYLE is not set
# BR2_GDB_VERSION_9_2 is not set

#
# Legacy options removed in 2022.08
#
# BR2_ECLIPSE_REGISTER is not set
# BR2_csky is not set
# BR2_PACKAGE_MESA3D_DRI_DRIVER_I915 is not set
# BR2_PACKAGE_MESA3D_DRI_DRIVER_I965 is not set
# BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU is not set
# BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON is not set
# BR2_GCC_VERSION_9_X is not set
# BR2_PACKAGE_PHP_EXT_WDDX is not set
# BR2_nds32 is not set
# BR2_PACKAGE_RTL8723BS is not set

#
# Legacy options removed in 2022.05
#
# BR2_PACKAGE_KTAP is not set
# BR2_KERNEL_HEADERS_5_16 is not set
# BR2_KERNEL_HEADERS_4_4 is not set
# BR2_BINUTILS_VERSION_2_32_X is not set
# BR2_sh2a is not set
# BR2_BINUTILS_VERSION_2_35_X is not set
# BR2_PACKAGE_BOOST_LAYOUT_TAGGED is not set
# BR2_PACKAGE_BOOST_LAYOUT_VERSIONED is not set

#
# Legacy options removed in 2022.02
#
BR2_TARGET_ROOTFS_OCI_ENTRYPOINT_ARGS=""
# BR2_PACKAGE_LIBCURL_LIBNSS is not set
# BR2_PACKAGE_WESTON_DEFAULT_FBDEV is not set
# BR2_PACKAGE_WESTON_FBDEV is not set
# BR2_PACKAGE_PYTHON_PYCLI is not set
# BR2_PACKAGE_LINUX_TOOLS_BPFTOOL is not set
# BR2_TARGET_UBOOT_NEEDS_PYTHON2 is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_LIBMMS is not set
# BR2_PACKAGE_PYTHON_FUNCTOOLS32 is not set
# BR2_PACKAGE_PYTHON_ENUM34 is not set
# BR2_PACKAGE_PYTHON_ENUM is not set
# BR2_PACKAGE_PYTHON_DIALOG is not set
# BR2_PACKAGE_PYTHON_CONFIGOBJ is not set
# BR2_PACKAGE_PYTHON_YIELDFROM is not set
# BR2_PACKAGE_PYTHON_TYPING is not set
# BR2_PACKAGE_PYTHON_SUBPROCESS32 is not set
# BR2_PACKAGE_PYTHON_SINGLEDISPATCH is not set
# BR2_PACKAGE_PYTHON_PYRO is not set
# BR2_PACKAGE_PYTHON_PYPCAP is not set
# BR2_PACKAGE_PYTHON_PATHLIB2 is not set
# BR2_PACKAGE_PYTHON_PAM is not set
# BR2_PACKAGE_PYTHON_NFC is not set
# BR2_PACKAGE_PYTHON_MAD is not set
# BR2_PACKAGE_PYTHON_IPADDRESS is not set
# BR2_PACKAGE_PYTHON_IPADDR is not set
# BR2_PACKAGE_PYTHON_ID3 is not set
# BR2_PACKAGE_PYTHON_FUTURES is not set
# BR2_PACKAGE_PYTHON_BACKPORTS_SSL_MATCH_HOSTNAME is not set
# BR2_PACKAGE_PYTHON_BACKPORTS_SHUTIL_GET_TERMINAL_SIZE is not set
# BR2_PACKAGE_PYTHON_BACKPORTS_ABC is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_TARGET_UBOOT_ZYNQ_IMAGE is not set
# BR2_PACKAGE_RPI_BT_FIRMWARE is not set
# BR2_PACKAGE_RPI_WIFI_FIRMWARE is not set
# BR2_PACKAGE_HOST_GDB_PYTHON is not set
# BR2_PACKAGE_GSTREAMER1_MM is not set
# BR2_KERNEL_HEADERS_5_14 is not set
# BR2_PACKAGE_PYTHON_BACKPORTS_FUNCTOOLS_LRU_CACHE is not set
# BR2_PACKAGE_CIVETWEB_WITH_LUA is not set
# BR2_PACKAGE_SUNXI_MALI_MAINLINE_DRIVER is not set
# BR2_PACKAGE_SUNXI_MALI_MAINLINE is not set
# BR2_PACKAGE_SUNXI_MALI_MAINLINE_R6P2 is not set
# BR2_PACKAGE_SUNXI_MALI_MAINLINE_R8P1 is not set
# BR2_PACKAGE_QT5WEBKIT_EXAMPLES is not set
# BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_GLIBC_BLEEDING_EDGE is not set
# BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_MUSL_BLEEDING_EDGE is not set
# BR2_PACKAGE_IPUTILS_TFTPD is not set
# BR2_PACKAGE_IPUTILS_TRACEROUTE6 is not set
# BR2_PACKAGE_LIBMEDIAART_BACKEND_NONE is not set
# BR2_PACKAGE_MPD_UPNP is not set

#
# Legacy options removed in 2021.11
#
# BR2_OPENJDK_VERSION_LTS is not set
# BR2_OPENJDK_VERSION_LATEST is not set
# BR2_PACKAGE_MPD_TIDAL is not set
# BR2_PACKAGE_MROUTED_RSRR is not set
# BR2_BINUTILS_VERSION_CSKY is not set
# BR2_GCC_VERSION_CSKY is not set
# BR2_PACKAGE_CANFESTIVAL is not set
# BR2_PACKAGE_NMAP_NDIFF is not set
# BR2_GDB_VERSION_8_3 is not set
# BR2_PACKAGE_PYTHON_MELD3 is not set
# BR2_PACKAGE_STRONGSWAN_EAP is not set
# BR2_PACKAGE_GNURADIO_PAGER is not set
# BR2_KERNEL_HEADERS_5_11 is not set
# BR2_KERNEL_HEADERS_5_12 is not set
# BR2_KERNEL_HEADERS_5_13 is not set

#
# Legacy options removed in 2021.08
#
BR2_TARGET_GRUB2_BUILTIN_MODULES=""
BR2_TARGET_GRUB2_BUILTIN_CONFIG=""
# BR2_PACKAGE_LIBMCRYPT is not set
# BR2_PACKAGE_MCRYPT is not set
# BR2_PACKAGE_PHP_EXT_MCRYPT is not set
# BR2_BINUTILS_VERSION_2_34_X is not set
# BR2_PACKAGE_LIBSOIL is not set
# BR2_PACKAGE_CLAPACK is not set
# BR2_PACKAGE_SPIDERMONKEY is not set
# BR2_PACKAGE_KODI_LIBVA is not set
# BR2_PACKAGE_PYTHON_COHERENCE is not set
# BR2_PACKAGE_PHP_EXT_XMLRPC is not set
# BR2_GCC_VERSION_8_X is not set

#
# Legacy options removed in 2021.05
#
# BR2_PACKAGE_UDISKS_LVM2 is not set
# BR2_PACKAGE_LVM2_APP_LIBRARY is not set
# BR2_PACKAGE_LVM2_LVMETAD is not set
# BR2_PACKAGE_MONKEY is not set
# BR2_PACKAGE_DOCKER_CONTAINERD is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_SCONESERVER_HTTP_SCONESITE_IMAGE is not set
# BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE_EVDEV is not set
# BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE_KBD is not set
# BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE_MOUSE is not set
# BR2_PACKAGE_MESA3D_OSMESA_CLASSIC is not set
# BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST is not set
# BR2_PACKAGE_KODI_SCREENSAVER_CRYSTALMORPH is not set

#
# Legacy options removed in 2021.02
#
# BR2_PACKAGE_MPD_AUDIOFILE is not set
# BR2_PACKAGE_AUDIOFILE is not set
# BR2_BINUTILS_VERSION_2_33_X is not set
# BR2_PACKAGE_LIBUPNP18 is not set
# BR2_PACKAGE_BOA is not set
# BR2_PACKAGE_LINUX_FIRMWARE_IMX_SDMA is not set
# BR2_GDB_VERSION_8_2 is not set
# BR2_PACKAGE_HOST_RCW is not set
# BR2_KERNEL_HEADERS_5_9 is not set
# BR2_KERNEL_HEADERS_5_8 is not set
# BR2_powerpc_601 is not set
# BR2_PACKAGE_TI_SGX_LIBGBM is not set
# BR2_PACKAGE_IPSEC_TOOLS is not set

#
# Legacy options removed in 2020.11
#
# BR2_PACKAGE_GPSD_FIXED_PORT_SPEED is not set
# BR2_PACKAGE_GPSD_RECONFIGURE is not set
# BR2_PACKAGE_GPSD_CONTROLSEND is not set
# BR2_PACKAGE_OPENCV is not set
# BR2_PACKAGE_LIBCROCO is not set
# BR2_PACKAGE_BELLAGIO is not set
# BR2_PACKAGE_SYSTEMD_JOURNAL_GATEWAY is not set
# BR2_TARGET_UBOOT_BOOT_SCRIPT is not set
# BR2_TARGET_UBOOT_ENVIMAGE is not set
# BR2_PACKAGE_KISMET_CLIENT is not set
# BR2_PACKAGE_KISMET_DRONE is not set
# BR2_GCC_VERSION_7_X is not set
# BR2_PACKAGE_GST1_VALIDATE is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_YADIF is not set
# BR2_PACKAGE_GQVIEW is not set
# BR2_PACKAGE_WESTON_IMX is not set
# BR2_KERNEL_HEADERS_5_7 is not set
# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_XSERVER_XORG_SERVER_AIGLX is not set
# BR2_PACKAGE_AMD_CATALYST is not set
# BR2_PACKAGE_NVIDIA_TEGRA23 is not set
# BR2_GDB_VERSION_8_1 is not set

#
# Legacy options removed in 2020.08
#
# BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64 is not set
# BR2_KERNEL_HEADERS_5_6 is not set
# BR2_KERNEL_HEADERS_5_5 is not set
# BR2_BINUTILS_VERSION_2_31_X is not set
# BR2_PACKAGE_KODI_PERIPHERAL_STEAMCONTROLLER is not set

#
# Legacy options removed in 2020.05
#
# BR2_PACKAGE_WIRINGPI is not set
# BR2_PACKAGE_PYTHON_PYCRYPTO is not set
# BR2_PACKAGE_MTDEV2TUIO is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_COLLECTD_LVM is not set
# BR2_PACKAGE_PYTHON_PYASN is not set
# BR2_PACKAGE_PYTHON_PYASN_MODULES is not set
# BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA6174 is not set
# BR2_PACKAGE_QT5CANVAS3D is not set
# BR2_PACKAGE_KODI_LIBTHEORA is not set
# BR2_PACKAGE_CEGUI06 is not set
# BR2_GCC_VERSION_5_X is not set

#
# Legacy options removed in 2020.02
#
# BR2_PACKAGE_JAMVM is not set
# BR2_PACKAGE_CLASSPATH is not set
# BR2_PACKAGE_QT5_VERSION_5_6 is not set
# BR2_PACKAGE_CURL is not set
# BR2_PACKAGE_GSTREAMER is not set
# BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_GSTREAMER_PLUGINS is not set
# BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_NV_SAMPLE_APPS is not set
# BR2_PACKAGE_FREERDP_GSTREAMER is not set
# BR2_PACKAGE_OPENCV3_WITH_GSTREAMER is not set
# BR2_PACKAGE_OPENCV_WITH_GSTREAMER is not set
# BR2_PACKAGE_LIBPLAYER is not set
# BR2_GCC_VERSION_OR1K is not set
# BR2_PACKAGE_BLUEZ_UTILS is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_FIS is not set
BR2_PACKAGE_REFPOLICY_POLICY_VERSION=""
# BR2_PACKAGE_CELT051 is not set
# BR2_PACKAGE_WIREGUARD is not set
# BR2_PACKAGE_PERL_NET_PING is not set
# BR2_PACKAGE_PERL_MIME_BASE64 is not set
# BR2_PACKAGE_PERL_DIGEST_MD5 is not set
# BR2_PACKAGE_ERLANG_P1_ICONV is not set
# BR2_KERNEL_HEADERS_5_3 is not set
# BR2_PACKAGE_PYTHON_SCAPY3K is not set
# BR2_BINUTILS_VERSION_2_30_X is not set
# BR2_PACKAGE_RPI_USERLAND_START_VCFILED is not set
# BR2_PACKAGE_TI_SGX_KM_AM335X is not set
# BR2_PACKAGE_TI_SGX_KM_AM437X is not set
# BR2_PACKAGE_TI_SGX_KM_AM4430 is not set
# BR2_PACKAGE_TI_SGX_KM_AM5430 is not set

#
# Legacy options removed in 2019.11
#
# BR2_PACKAGE_OPENVMTOOLS_PROCPS is not set
# BR2_PACKAGE_ALLJOYN is not set
# BR2_PACKAGE_ALLJOYN_BASE is not set
# BR2_PACKAGE_ALLJOYN_BASE_CONTROLPANEL is not set
# BR2_PACKAGE_ALLJOYN_BASE_NOTIFICATION is not set
# BR2_PACKAGE_ALLJOYN_BASE_ONBOARDING is not set
# BR2_PACKAGE_ALLJOYN_TCL_BASE is not set
# BR2_PACKAGE_ALLJOYN_TCL is not set
BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS=""
# BR2_PACKAGE_PYTHON_PYSNMP_APPS is not set
# BR2_KERNEL_HEADERS_5_2 is not set
# BR2_TARGET_RISCV_PK is not set
# BR2_PACKAGE_SQLITE_STAT3 is not set
# BR2_KERNEL_HEADERS_5_1 is not set
# BR2_PACKAGE_DEVMEM2 is not set
# BR2_PACKAGE_USTR is not set
# BR2_PACKAGE_KODI_SCREENSAVER_PLANESTATE is not set
# BR2_PACKAGE_KODI_VISUALISATION_WAVEFORHUE is not set
# BR2_PACKAGE_KODI_AUDIODECODER_OPUS is not set
# BR2_PACKAGE_MESA3D_OSMESA is not set
# BR2_PACKAGE_HOSTAPD_DRIVER_RTW is not set
# BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW is not set
# BR2_PACKAGE_WPA_SUPPLICANT_DBUS_OLD is not set

#
# Legacy options removed in 2019.08
#
# BR2_TARGET_TS4800_MBRBOOT is not set
# BR2_PACKAGE_LIBAMCODEC is not set
# BR2_PACKAGE_ODROID_SCRIPTS is not set
# BR2_PACKAGE_ODROID_MALI is not set
# BR2_PACKAGE_KODI_PLATFORM_AML is not set
# BR2_GCC_VERSION_6_X is not set
# BR2_GCC_VERSION_4_9_X is not set
# BR2_GDB_VERSION_7_12 is not set
# BR2_PACKAGE_XAPP_MKFONTDIR is not set
# BR2_GDB_VERSION_8_0 is not set
# BR2_KERNEL_HEADERS_4_20 is not set
# BR2_KERNEL_HEADERS_5_0 is not set

#
# Legacy options removed in 2019.05
#
# BR2_CSKY_DSP is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_COMPOSITOR is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_IQA is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_OPENCV is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_STEREO is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VCD is not set
# BR2_PACKAGE_LUNIT is not set
# BR2_PACKAGE_FFMPEG_FFSERVER is not set
# BR2_PACKAGE_LIBUMP is not set
# BR2_PACKAGE_SUNXI_MALI is not set
# BR2_BINUTILS_VERSION_2_29_X is not set
# BR2_BINUTILS_VERSION_2_28_X is not set
# BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_APEXSINK is not set

#
# Legacy options removed in 2019.02
#
# BR2_PACKAGE_QT is not set
# BR2_PACKAGE_QTUIO is not set
# BR2_PACKAGE_PINENTRY_QT4 is not set
# BR2_PACKAGE_POPPLER_QT is not set
# BR2_PACKAGE_OPENCV3_WITH_QT is not set
# BR2_PACKAGE_OPENCV_WITH_QT is not set
# BR2_PACKAGE_AMD_CATALYST_CCCLE is not set
# BR2_PACKAGE_SDL_QTOPIA is not set
# BR2_PACKAGE_PYTHON_PYQT is not set
# BR2_PACKAGE_LUACRYPTO is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_BOOST_SIGNALS is not set
# BR2_PACKAGE_FFTW_PRECISION_SINGLE is not set
# BR2_PACKAGE_FFTW_PRECISION_DOUBLE is not set
# BR2_PACKAGE_FFTW_PRECISION_LONG_DOUBLE is not set
# BR2_PACKAGE_LUA_5_2 is not set
# BR2_TARGET_GENERIC_PASSWD_MD5 is not set

#
# Legacy options removed in 2018.11
#
# BR2_TARGET_XLOADER is not set
# BR2_PACKAGE_TIDSP_BINARIES is not set
# BR2_PACKAGE_DSP_TOOLS is not set
# BR2_PACKAGE_GST_DSP is not set
# BR2_PACKAGE_BOOTUTILS is not set
# BR2_PACKAGE_EXPEDITE is not set
# BR2_PACKAGE_MESA3D_OPENGL_TEXTURE_FLOAT is not set
# BR2_KERNEL_HEADERS_4_10 is not set
# BR2_KERNEL_HEADERS_4_11 is not set
# BR2_KERNEL_HEADERS_4_12 is not set
# BR2_KERNEL_HEADERS_4_13 is not set
# BR2_KERNEL_HEADERS_4_15 is not set
# BR2_KERNEL_HEADERS_4_17 is not set
# BR2_PACKAGE_LIBNFTNL_XML is not set
# BR2_KERNEL_HEADERS_3_2 is not set
# BR2_KERNEL_HEADERS_4_1 is not set
# BR2_KERNEL_HEADERS_4_16 is not set
# BR2_KERNEL_HEADERS_4_18 is not set

#
# Legacy options removed in 2018.08
#
# BR2_PACKAGE_DOCKER_ENGINE_STATIC_CLIENT is not set
# BR2_PACKAGE_XPROTO_APPLEWMPROTO is not set
# BR2_PACKAGE_XPROTO_BIGREQSPROTO is not set
# BR2_PACKAGE_XPROTO_COMPOSITEPROTO is not set
# BR2_PACKAGE_XPROTO_DAMAGEPROTO is not set
# BR2_PACKAGE_XPROTO_DMXPROTO is not set
# BR2_PACKAGE_XPROTO_DRI2PROTO is not set
# BR2_PACKAGE_XPROTO_DRI3PROTO is not set
# BR2_PACKAGE_XPROTO_FIXESPROTO is not set
# BR2_PACKAGE_XPROTO_FONTCACHEPROTO is not set
# BR2_PACKAGE_XPROTO_FONTSPROTO is not set
# BR2_PACKAGE_XPROTO_GLPROTO is not set
# BR2_PACKAGE_XPROTO_INPUTPROTO is not set
# BR2_PACKAGE_XPROTO_KBPROTO is not set
# BR2_PACKAGE_XPROTO_PRESENTPROTO is not set
# BR2_PACKAGE_XPROTO_RANDRPROTO is not set
# BR2_PACKAGE_XPROTO_RECORDPROTO is not set
# BR2_PACKAGE_XPROTO_RENDERPROTO is not set
# BR2_PACKAGE_XPROTO_RESOURCEPROTO is not set
# BR2_PACKAGE_XPROTO_SCRNSAVERPROTO is not set
# BR2_PACKAGE_XPROTO_VIDEOPROTO is not set
# BR2_PACKAGE_XPROTO_WINDOWSWMPROTO is not set
# BR2_PACKAGE_XPROTO_XCMISCPROTO is not set
# BR2_PACKAGE_XPROTO_XEXTPROTO is not set
# BR2_PACKAGE_XPROTO_XF86BIGFONTPROTO is not set
# BR2_PACKAGE_XPROTO_XF86DGAPROTO is not set
# BR2_PACKAGE_XPROTO_XF86DRIPROTO is not set
# BR2_PACKAGE_XPROTO_XF86VIDMODEPROTO is not set
# BR2_PACKAGE_XPROTO_XINERAMAPROTO is not set
# BR2_PACKAGE_XPROTO_XPROTO is not set
# BR2_PACKAGE_XPROTO_XPROXYMANAGEMENTPROTOCOL is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_OPENGL is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_GLES2 is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_GLX is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_EGL is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_X11 is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_WAYLAND is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_DISPMANX is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_AUDIOMIXER is not set
# BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_LAME is not set
# BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_MPG123 is not set
# BR2_GDB_VERSION_7_11 is not set
# BR2_GDB_VERSION_7_10 is not set

#
# Legacy options removed in 2018.05
#
# BR2_PACKAGE_MEDIAART_BACKEND_NONE is not set
# BR2_PACKAGE_MEDIAART_BACKEND_GDK_PIXBUF is not set
# BR2_PACKAGE_MEDIAART_BACKEND_QT is not set
# BR2_PACKAGE_TI_SGX_AM335X is not set
# BR2_PACKAGE_TI_SGX_AM437X is not set
# BR2_PACKAGE_TI_SGX_AM4430 is not set
# BR2_PACKAGE_TI_SGX_AM5430 is not set
# BR2_PACKAGE_JANUS_AUDIO_BRIDGE is not set
# BR2_PACKAGE_JANUS_ECHO_TEST is not set
# BR2_PACKAGE_JANUS_RECORDPLAY is not set
# BR2_PACKAGE_JANUS_SIP_GATEWAY is not set
# BR2_PACKAGE_JANUS_STREAMING is not set
# BR2_PACKAGE_JANUS_TEXT_ROOM is not set
# BR2_PACKAGE_JANUS_VIDEO_CALL is not set
# BR2_PACKAGE_JANUS_VIDEO_ROOM is not set
# BR2_PACKAGE_JANUS_MQTT is not set
# BR2_PACKAGE_JANUS_RABBITMQ is not set
# BR2_PACKAGE_JANUS_REST is not set
# BR2_PACKAGE_JANUS_UNIX_SOCKETS is not set
# BR2_PACKAGE_JANUS_WEBSOCKETS is not set
# BR2_PACKAGE_IPSEC_SECCTX_DISABLE is not set
# BR2_PACKAGE_IPSEC_SECCTX_ENABLE is not set
# BR2_PACKAGE_IPSEC_SECCTX_KERNEL is not set
# BR2_PACKAGE_LIBTFDI_CPP is not set
# BR2_PACKAGE_JQUERY_UI_THEME_BLACK_TIE is not set
# BR2_PACKAGE_JQUERY_UI_THEME_BLITZER is not set
# BR2_PACKAGE_JQUERY_UI_THEME_CUPERTINO is not set
# BR2_PACKAGE_JQUERY_UI_THEME_DARK_HIVE is not set
# BR2_PACKAGE_JQUERY_UI_THEME_DOT_LUV is not set
# BR2_PACKAGE_JQUERY_UI_THEME_EGGPLANT is not set
# BR2_PACKAGE_JQUERY_UI_THEME_EXCITE_BIKE is not set
# BR2_PACKAGE_JQUERY_UI_THEME_FLICK is not set
# BR2_PACKAGE_JQUERY_UI_THEME_HOT_SNEAKS is not set
# BR2_PACKAGE_JQUERY_UI_THEME_HUMANITY is not set
# BR2_PACKAGE_JQUERY_UI_THEME_LE_FROG is not set
# BR2_PACKAGE_JQUERY_UI_THEME_MINT_CHOC is not set
# BR2_PACKAGE_JQUERY_UI_THEME_OVERCAST is not set
# BR2_PACKAGE_JQUERY_UI_THEME_PEPPER_GRINDER is not set
# BR2_PACKAGE_JQUERY_UI_THEME_REDMOND is not set
# BR2_PACKAGE_JQUERY_UI_THEME_SMOOTHNESS is not set
# BR2_PACKAGE_JQUERY_UI_THEME_SOUTH_STREET is not set
# BR2_PACKAGE_JQUERY_UI_THEME_START is not set
# BR2_PACKAGE_JQUERY_UI_THEME_SUNNY is not set
# BR2_PACKAGE_JQUERY_UI_THEME_SWANKY_PURSE is not set
# BR2_PACKAGE_JQUERY_UI_THEME_TRONTASTIC is not set
# BR2_PACKAGE_JQUERY_UI_THEME_UI_DARKNESS is not set
# BR2_PACKAGE_JQUERY_UI_THEME_UI_LIGHTNESS is not set
# BR2_PACKAGE_JQUERY_UI_THEME_VADER is not set
# BR2_PACKAGE_BLUEZ5_PLUGINS_HEALTH is not set
# BR2_PACKAGE_BLUEZ5_PLUGINS_MIDI is not set
# BR2_PACKAGE_BLUEZ5_PLUGINS_NFC is not set
# BR2_PACKAGE_BLUEZ5_PLUGINS_SAP is not set
# BR2_PACKAGE_BLUEZ5_PLUGINS_SIXAXIS is not set
# BR2_PACKAGE_TRANSMISSION_REMOTE is not set
# BR2_PACKAGE_LIBKCAPI_APPS is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_MPLAYER_MPLAYER is not set
# BR2_PACKAGE_MPLAYER_MENCODER is not set
# BR2_PACKAGE_LIBPLAYER_MPLAYER is not set
# BR2_PACKAGE_IQVLINUX is not set
# BR2_BINFMT_FLAT_SEP_DATA is not set
# BR2_bfin is not set
# BR2_PACKAGE_KODI_ADSP_BASIC is not set
# BR2_PACKAGE_KODI_ADSP_FREESURROUND is not set

#
# Legacy options removed in 2018.02
#
# BR2_KERNEL_HEADERS_3_4 is not set
# BR2_KERNEL_HEADERS_3_10 is not set
# BR2_KERNEL_HEADERS_3_12 is not set
# BR2_BINUTILS_VERSION_2_27_X is not set
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_GNUPG2_GPGV2 is not set
# BR2_PACKAGE_IMX_GPU_VIV_APITRACE is not set
# BR2_PACKAGE_IMX_GPU_VIV_G2D is not set

#
# Legacy options removed in 2017.11
#
# BR2_PACKAGE_RFKILL is not set
# BR2_PACKAGE_UTIL_LINUX_RESET is not set
# BR2_PACKAGE_POLICYCOREUTILS_AUDIT2ALLOW is not set
# BR2_PACKAGE_POLICYCOREUTILS_RESTORECOND is not set
# BR2_PACKAGE_SEPOLGEN is not set
# BR2_PACKAGE_OPENOBEX_BLUEZ is not set
# BR2_PACKAGE_OPENOBEX_LIBUSB is not set
# BR2_PACKAGE_OPENOBEX_APPS is not set
# BR2_PACKAGE_OPENOBEX_SYSLOG is not set
# BR2_PACKAGE_OPENOBEX_DUMP is not set
# BR2_PACKAGE_AICCU is not set
# BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set

#
# Legacy options removed in 2017.08
#
# BR2_TARGET_GRUB is not set
# BR2_PACKAGE_SIMICSFS is not set
# BR2_BINUTILS_VERSION_2_26_X is not set
BR2_XTENSA_OVERLAY_DIR=""
BR2_XTENSA_CUSTOM_NAME=""
# BR2_PACKAGE_HOST_MKE2IMG is not set
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES=0
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_CDXAPARSE is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DATAURISRC is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DCCP is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_HDVPARSE is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MVE is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_NUVDEMUX is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_PATCHDETECT is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_SDI is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_TTA is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VIDEOMEASURE is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_APEXSINK is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_SDL is not set
# BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_MAD is not set
# BR2_STRIP_none is not set
# BR2_PACKAGE_BEECRYPT_CPP is not set
# BR2_PACKAGE_SPICE_CLIENT is not set
# BR2_PACKAGE_SPICE_GUI is not set
# BR2_PACKAGE_SPICE_TUNNEL is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS_INPUTATTACH is not set
# BR2_PACKAGE_INPUT_TOOLS_JSCAL is not set
# BR2_PACKAGE_INPUT_TOOLS_JSTEST is not set
# BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH is not set
# BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86 is not set
# BR2_GCC_VERSION_4_8_X is not set

#
# Legacy options removed in 2017.05
#
# BR2_PACKAGE_SUNXI_MALI_R2P4 is not set
# BR2_PACKAGE_NODEJS_MODULES_COFFEESCRIPT is not set
# BR2_PACKAGE_NODEJS_MODULES_EXPRESS is not set
# BR2_PACKAGE_BLUEZ5_UTILS_GATTTOOL is not set
# BR2_PACKAGE_OPENOCD_FT2XXX is not set
# BR2_PACKAGE_KODI_RTMPDUMP is not set
# BR2_PACKAGE_KODI_VISUALISATION_FOUNTAIN is not set
# BR2_PACKAGE_PORTMAP is not set
# BR2_BINUTILS_VERSION_2_25_X is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_RPC is not set
BR2_TARGET_ROOTFS_EXT2_EXTRA_BLOCKS=0
# BR2_PACKAGE_SYSTEMD_KDBUS is not set
# BR2_PACKAGE_POLARSSL is not set
# BR2_NBD_CLIENT is not set
# BR2_NBD_SERVER is not set
# BR2_PACKAGE_GMOCK is not set
# BR2_KERNEL_HEADERS_4_8 is not set
# BR2_KERNEL_HEADERS_3_18 is not set
# BR2_GLIBC_VERSION_2_22 is not set

#
# Legacy options removed in 2017.02
#
# BR2_PACKAGE_PERL_DB_FILE is not set
# BR2_KERNEL_HEADERS_4_7 is not set
# BR2_KERNEL_HEADERS_4_6 is not set
# BR2_KERNEL_HEADERS_4_5 is not set
# BR2_KERNEL_HEADERS_3_14 is not set
# BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS is not set
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
# BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX is not set
# BR2_PACKAGE_MAKEDEVS is not set
# BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A is not set
# BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE is not set
# BR2_PACKAGE_SNOWBALL_HDMISERVICE is not set
# BR2_PACKAGE_SNOWBALL_INIT is not set
# BR2_GDB_VERSION_7_9 is not set

#
# Legacy options removed in 2016.11
#
# BR2_PACKAGE_PHP_SAPI_CLI_CGI is not set
# BR2_PACKAGE_PHP_SAPI_CLI_FPM is not set
# BR2_PACKAGE_WVSTREAMS is not set
# BR2_PACKAGE_WVDIAL is not set
# BR2_PACKAGE_WEBKITGTK24 is not set
# BR2_PACKAGE_TORSMO is not set
# BR2_PACKAGE_SSTRIP is not set
# BR2_KERNEL_HEADERS_4_3 is not set
# BR2_KERNEL_HEADERS_4_2 is not set
# BR2_PACKAGE_KODI_ADDON_XVDR is not set
# BR2_PACKAGE_IPKG is not set
# BR2_GCC_VERSION_4_7_X is not set
# BR2_BINUTILS_VERSION_2_24_X is not set
# BR2_PACKAGE_WESTON_RPI is not set
# BR2_GCC_VERSION_4_8_ARC is not set
# BR2_KERNEL_HEADERS_4_0 is not set
# BR2_KERNEL_HEADERS_3_19 is not set
# BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS is not set
# BR2_PACKAGE_ELEMENTARY is not set
# BR2_LINUX_KERNEL_CUSTOM_LOCAL is not set

#
# Legacy options removed in 2016.08
#
# BR2_PACKAGE_EFL_JP2K is not set
# BR2_PACKAGE_SYSTEMD_COMPAT is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_LIVEADDER is not set
# BR2_PACKAGE_LIBFSLVPUWRAP is not set
# BR2_PACKAGE_LIBFSLPARSER is not set
# BR2_PACKAGE_LIBFSLCODEC is not set
# BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT is not set
# BR2_PTHREADS_OLD is not set
# BR2_BINUTILS_VERSION_2_23_X is not set
# BR2_TOOLCHAIN_BUILDROOT_EGLIBC is not set
# BR2_GDB_VERSION_7_8 is not set

#
# Legacy options removed in 2016.05
#
# BR2_PACKAGE_OPENVPN_CRYPTO_POLARSSL is not set
# BR2_PACKAGE_NGINX_HTTP_SPDY_MODULE is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_RTP is not set
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MPG123 is not set
# BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC is not set
# BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC_E500V2 is not set
# BR2_x86_i386 is not set
# BR2_PACKAGE_QT5QUICK1 is not set
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR=""
# BR2_PACKAGE_XDRIVER_XF86_INPUT_VOID is not set
# BR2_KERNEL_HEADERS_3_17 is not set
# BR2_GDB_VERSION_7_7 is not set
# BR2_PACKAGE_FOOMATIC_FILTERS is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_KODI_WAVPACK is not set
# BR2_PACKAGE_KODI_RSXS is not set
# BR2_PACKAGE_KODI_GOOM is not set
# BR2_PACKAGE_SYSTEMD_ALL_EXTRAS is not set
# BR2_GCC_VERSION_4_5_X is not set
# BR2_PACKAGE_SQLITE_READLINE is not set

#
# Legacy options removed in 2016.02
#
# BR2_PACKAGE_DOVECOT_BZIP2 is not set
# BR2_PACKAGE_DOVECOT_ZLIB is not set
# BR2_PACKAGE_E2FSPROGS_FINDFS is not set
# BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL is not set
# BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE is not set
# BR2_PACKAGE_OPENPOWERLINK_LIBPCAP is not set
# BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set
# BR2_PACKAGE_CUPS_PDFTOPS is not set
# BR2_KERNEL_HEADERS_3_16 is not set
# BR2_PACKAGE_PYTHON_PYXML is not set
# BR2_ENABLE_SSP is not set
# BR2_PACKAGE_DIRECTFB_CLE266 is not set
# BR2_PACKAGE_DIRECTFB_UNICHROME is not set
# BR2_PACKAGE_LIBELEMENTARY is not set
# BR2_PACKAGE_LIBEINA is not set
# BR2_PACKAGE_LIBEET is not set
# BR2_PACKAGE_LIBEVAS is not set
# BR2_PACKAGE_LIBECORE is not set
# BR2_PACKAGE_LIBEDBUS is not set
# BR2_PACKAGE_LIBEFREET is not set
# BR2_PACKAGE_LIBEIO is not set
# BR2_PACKAGE_LIBEMBRYO is not set
# BR2_PACKAGE_LIBEDJE is not set
# BR2_PACKAGE_LIBETHUMB is not set
# BR2_PACKAGE_INFOZIP is not set
# BR2_BR2_PACKAGE_NODEJS_0_10_X is not set
# BR2_BR2_PACKAGE_NODEJS_0_12_X is not set
# BR2_BR2_PACKAGE_NODEJS_4_X is not set

#
# Legacy options removed in 2015.11
#
# BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_REAL is not set
# BR2_PACKAGE_MEDIA_CTL is not set
# BR2_PACKAGE_SCHIFRA is not set
# BR2_PACKAGE_ZXING is not set
# BR2_PACKAGE_BLACKBOX is not set
# BR2_KERNEL_HEADERS_3_0 is not set
# BR2_KERNEL_HEADERS_3_11 is not set
# BR2_KERNEL_HEADERS_3_13 is not set
# BR2_KERNEL_HEADERS_3_15 is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_ANDI is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_BLTLOAD is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_CPULOAD is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_DATABUFFER is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_DIOLOAD is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_DOK is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_DRIVERTEST is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_FIRE is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_FLIP is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_FONTS is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_INPUT is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_JOYSTICK is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_KNUCKLES is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_LAYER is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_MATRIX is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_MATRIX_WATER is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_NEO is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_NETLOAD is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_PALETTE is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_PARTICLE is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_PORTER is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_STRESS is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_TEXTURE is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_VIDEO is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_VIDEO_PARTICLE is not set
# BR2_PACKAGE_DIRECTFB_EXAMPLES_WINDOW is not set
# BR2_PACKAGE_KOBS_NG is not set
# BR2_PACKAGE_SAWMAN is not set
# BR2_PACKAGE_DIVINE is not set

#
# Legacy options removed in 2015.08
#
# BR2_PACKAGE_KODI_PVR_ADDONS is not set
# BR2_BINUTILS_VERSION_2_23_2 is not set
# BR2_BINUTILS_VERSION_2_24 is not set
# BR2_BINUTILS_VERSION_2_25 is not set
# BR2_PACKAGE_PERF is not set
# BR2_BINUTILS_VERSION_2_22 is not set
# BR2_PACKAGE_GPU_VIV_BIN_MX6Q is not set
# BR2_TARGET_UBOOT_NETWORK is not set

[luckfox-eng33]

From the log, I think you lost part of the SDK configuration, causing the camera driver to not register properly. Please do not make any modifications and use the original SDK for testing. Also, when compiling buildroot or busybox, please do not use sudo, which may cause permission confusion.

[luckfox-eng33]

I want you to use the original SDK for testing, and first eliminate problems with our SDK. Then you can modify it step by step and then determine the specific problem. It does not restrict you from modifying the corresponding configuration. Based on the existing information, I just think there is a problem with your configuration. You need to solve the specific problem by yourself.

[fredsco]

@luckfox-eng33 I deleted the luckfox-sdk folder and cloned it again. when building I can already see some new builds regarding to drivers/video which I didn't see previously.

Configuring the buildroot and kernel still show me that drivers/video is being built

Perhaps as you said using sudo messed things up. I will keep this thread updated once my built is done and everything works.

[fredsco]

@luckfox-eng33 Even after following steps above Camera is not working. I would really appreciate your help in this. I have literally pulled the sdk without modifications and after flashing (see image attached) camera is not working as there is nothing inside ls /userdata/

[build.sh:info] Partition Filesystem Type Configure: rootfs@IGNORE@ext4,userdata@/userdata@ext4,oem@/oem@ext4
[build.sh:info] switch to DTS: /home/fredsco/dev/luckfox-pico/sysdrv/source/kernel/arch/arm/boot/dts/rv1103g-luckfox-pico-mini-b.dts
[build.sh:info] switch to kernel defconfig: /home/fredsco/dev/luckfox-pico/sysdrv/source/kernel/arch/arm/configs/luckfox_rv1106_linux_defconfig
[build.sh:info] switch to buildroot defconfig: /home/fredsco/dev/luckfox-pico/sysdrv/source/buildroot/buildroot-2023.02.6/configs/luckfox_pico_defconfig
============================================
TARGET_ARCH=arm
TARGET_UBOOT_CONFIG=luckfox_rv1106_uboot_defconfig rk-emmc.config
TARGET_SPL_CONFIG=
TARGET_KERNEL_CONFIG=luckfox_rv1106_linux_defconfig
TARGET_KERNEL_DTS=rv1103g-luckfox-pico-mini-b.dts
TARGET_RECOVERY_CONFIG=
TARGET_RAMBOOT_CONFIG=

[xt8288]

The latest SDK compiled image can successfully detect the camera after enabling CSI.

[fredsco]

The latest SDK compiled image can successfully detect the camera after enabling CSI.

@xt8288 Can you please tell me how you enabled CSI? was it pre built or post? Thank you

If I do luckfox-config on the board and enable CSI there, after a reboot I still don't see videoX in /userdata/

[xt8288]

I simply downloaded the latest SDK without making any modifications, compiled the image, and flashed it onto the development board. After logging into the development board, I enabled it in luckfox-config and rebooted for the changes to take effect.

[fredsco]

Ok. I just did everything again @luckfox-eng33 @xt8288

literally the only thing I have done are the following steps:

1. git clone https://github.com/LuckfoxTECH/luckfox-pico.git
2. cd {SDK_PATH}/tools/linux/toolchain/arm-rockchip830-linux-uclibcgnueabihf/
3. source env_install_toolchain.sh
4. cd ~/{SDK_PATH}
5. ./build.sh
6. select pico mini B -> SD card

This works, I see videoX now under userdata

but once I :

1. ./build.sh clean
2. enable USB host mode -> https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-USB
3. enable RTL8192CU in kernel config (./build.sh kernelconfig)
4. and enable wpa_supplicant in buildroot config (./build.sh buildrootconfig)
5. recompile.. (./build.sh)
6. Flash to SD -> no videoX is shown in /userdata/

Why won't this work? is it due to resources? and/or USB HOST mode? and what would be a good way to find out which of the steps above causes the problem?

[fredsco]

It works!!

I again deleted the SDK redid the above and now both Wifi dongle and video work!!

All I can think of is that this time I did not add: In pico-sdk/project/cfg/BoardConfig-SD_CARD-Buildroot-RV1103_Luckfox_Pico_Mini_B-IPC end of line export RK_ENABLE_WIFI=y

What I do notice if I on top of that add a FT232 the OS is logging voltage jitter? can I avoid this. once FT232 is disconnected ssh over wifi works fine and os seems stable.

[luckfox-eng33]

First of all, different issues call for different issues. Then, voltage jitter is probably caused by the fact that your module requires a large instantaneous startup current

[fredsco]

short summary:

It turns out that I forgot to set the necessary environment variables (see README for details). Even if you set the environment variables after first build it will still not work.

source env_install_toolchain.sh

If this happens to you, do not retry it after you already compiled. Reclone the SDK because it still won't work if you set the environment variables after compilation (even when running a -clean all)