issue with motion devices that expose temp & humd

tammeryousef1006 commented 4 months ago

hi

after adding all devices to smartthings hub , i noticed that motion devices which report also temperature are showing only the temperature ( smartthings Motion sensor (2018 model) ) and not showing the motion part , i got other motion devices are working correctly (sonoff SNZB-03 ) , is there any workaround to show the motion sensor as priority ahead of temperature ?
i got the tab for the log but it doesnt report transactions even its set to info .
as a question is it possible to add the functions like reset bridge and reset child bridge to the gui web page beside shutdown and reboot functions ? also if possible to add an info regarding which controllers already commissioned to the bridge (such as home assistant , google home etc.. ) with the ability to remove controller from same page . kindly see below from the smartthings app and zigbee2mqtt pages

Best Regards

Screenshot_20240418_175331_SmartThings Screenshot_20240418_175302_SmartThings and from zigbee2mqtt kids motion ewelink motion

Luligu commented 4 months ago

Hi,I’m with only phone, but can you send me please the 3 file bridge info devices and group that are in the Matterbridge/matterbridge-zigbee2mqtt directory. I need to see the expose.For log problem (randomly connecting) the patch is already done and will publish this night but I would like to solve the first problem too…The rest are excellent ideas will be in the todo list.Thanks On 18 Apr 2024, at 17:06, Tamer Salah @.***> wrote: hi

after adding all devices to smartthings hub , i noticed that motion devices which report also temperature and humidity are showing only the temperature and humidity ( smartthings Motion sensor (2018 model) ) and not showing the motion part , i got other motion devices are working correctly (sonoff SNZB-03 ) , is there any workaround to show the motion sensor as priority ahead of temperature ? i got the tab for the log but it doesnt report transactions even its set to info . as a question is it possible to add the functions like reset bridge and reset child bridge to the gui web page beside shutdown and reboot functions ? also if possible to add an info regarding which controllers already commissioned to the bridge (such as home assistant , google home etc.. ) with the ability to remove controller from same page . kindly see below from the smartthings app

Best Regards Screenshot_20240418_175331_SmartThings.jpg (view on web) Screenshot_20240418_175302_SmartThings.jpg (view on web) and from zigbee2mqtt kids.motion.png (view on web) ewelink.motion.png (view on web)

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

Luligu commented 4 months ago

For the controller question can you send me the number you see in the log and tell me what controller is it ?

[20:07:26.720] [Matterbridge] Controller 4937/Windows connected to Matterbridge I know that 4937 is Apple Home and Windows is the name of the Home. If you can give me the information about the numbers of the other most used controllers I can add them and it's a nice idea.

Luligu commented 4 months ago

If you want to try the pre release and test it contact me on Discord where I can send you the pre release.

tammeryousef1006 commented 4 months ago

I will reply with more details once i reach home . The controller is smartthings v3 hub

On Thu, 18 Apr 2024, 9:11 pm Luligu, @.***> wrote:

If you want to try the pre release and test it contact me on Discord where I can send you the pre release.

— Reply to this email directly, view it on GitHub https://github.com/Luligu/matterbridge-zigbee2mqtt/issues/9#issuecomment-2064803994, or unsubscribe https://github.com/notifications/unsubscribe-auth/AO3B3TFAYPFZC7PWURNS3Q3Y6AEFNAVCNFSM6AAAAABGNO5AZWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRUHAYDGOJZGQ . You are receiving this because you authored the thread.Message ID: @.***>

tammeryousef1006 commented 4 months ago

im using smartthings hub and this what i got from the log : [Matterbridge] Controller 4362/SmartThings Hub 1B52 connected to Matterbridge

On Thu, Apr 18, 2024 at 9:09 PM Luligu @.***> wrote:

For the controller question can you send me the number you see in the log and tell me what controlle is it ?

[20:07:26.720] [Matterbridge] Controller 4937/Windows connected to Matterbridge I know that 4937 is Apple Home and Windows is the name of the Home. If you can give me the information about the numbers of the other most used controllers I can add them and it's a nice idea.

— Reply to this email directly, view it on GitHub https://github.com/Luligu/matterbridge-zigbee2mqtt/issues/9#issuecomment-2064798094, or unsubscribe https://github.com/notifications/unsubscribe-auth/AO3B3THUUWORRNFDZ5X2ORDY6AD6XAVCNFSM6AAAAABGNO5AZWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRUG44TQMBZGQ . You are receiving this because you authored the thread.Message ID: @.***>

tammeryousef1006 commented 4 months ago

bridge-devices.json bridge-groups.json bridge-info.json networkmap_raw.json

tammeryousef1006 commented 4 months ago

hello , how to find and contact you at discord ?

On Thu, Apr 18, 2024 at 9:11 PM Luligu @.***> wrote:

If you want to try the pre release and test it contact me on Discord where I can send you the pre release.

— Reply to this email directly, view it on GitHub https://github.com/Luligu/matterbridge-zigbee2mqtt/issues/9#issuecomment-2064803994, or unsubscribe https://github.com/notifications/unsubscribe-auth/AO3B3TFAYPFZC7PWURNS3Q3Y6AEFNAVCNFSM6AAAAABGNO5AZWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRUHAYDGOJZGQ . You are receiving this because you authored the thread.Message ID: @.***>

Luligu commented 4 months ago

Hi,I published the new releases both Matterbridge and z2m plugin…Added also Smarthings to the controller names…When you have time check the wss connection please (the logs).On discord same name as GitHub…We speak there for your motion device with temperature… but I checked the files and it seems perfect. I will load it in the simulator just to be sure.Thanks for your help.On 19 Apr 2024, at 13:14, Tamer Salah @.***> wrote: hello , how to find and contact you at discord ?

On Thu, Apr 18, 2024 at 9:11 PM Luligu @.***> wrote:

If you want to try the pre release and test it contact me on Discord where

I can send you the pre release.

—

Reply to this email directly, view it on GitHub

https://github.com/Luligu/matterbridge-zigbee2mqtt/issues/9#issuecomment-2064803994,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AO3B3TFAYPFZC7PWURNS3Q3Y6AEFNAVCNFSM6AAAAABGNO5AZWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRUHAYDGOJZGQ

.

You are receiving this because you authored the thread.Message ID:

@.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

tammeryousef1006 commented 4 months ago

i already update the bridge and plugin , the motion sensor still showing the room temperature only , also i noticed that some devices like aqara cube is exposing the inner temp of device itself which i cant disable it

On Fri, Apr 19, 2024 at 3:33 PM Luligu @.***> wrote:

Hi,I published the new releases both Matterbridge and z2m plugin…Added also Smarthings to the controller names…When you have time check the wss connection please (the logs).On discord same name as GitHub…We speak there for your motion device with temperature… but I checked the files and it seems perfect. I will load it in the simulator just to be sure.Thanks for your help.On 19 Apr 2024, at 13:14, Tamer Salah @.***> wrote: hello , how to find and contact you at discord ?

On Thu, Apr 18, 2024 at 9:11 PM Luligu @.***> wrote:

If you want to try the pre release and test it contact me on Discord where

I can send you the pre release.

—

Reply to this email directly, view it on GitHub

< https://github.com/Luligu/matterbridge-zigbee2mqtt/issues/9#issuecomment-2064803994>,

or unsubscribe

< https://github.com/notifications/unsubscribe-auth/AO3B3TFAYPFZC7PWURNS3Q3Y6AEFNAVCNFSM6AAAAABGNO5AZWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRUHAYDGOJZGQ>

.

You are receiving this because you authored the thread.Message ID:

@.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/Luligu/matterbridge-zigbee2mqtt/issues/9#issuecomment-2066474159, or unsubscribe https://github.com/notifications/unsubscribe-auth/AO3B3TBSIHLCGCKA33ZZKK3Y6EFINAVCNFSM6AAAAABGNO5AZWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWGQ3TIMJVHE . You are receiving this because you authored the thread.Message ID: @.***>

Luligu commented 4 months ago

The featureBlackList allows to blacklist a z2m feature if you don't want to expose it (e.g. device_temperature).

Luligu / matterbridge-zigbee2mqtt

issue with motion devices that expose temp & humd #9