Closed sp5wwp closed 10 months ago
Due to leakage current reaching one of the transistors i nthe power control section, the Shutdown menu entry doesn't work as intended.
Shutdown
Workaround: solder a 10k resistor between STM32's pin 50 or D7's pin 1 (GPIO_POWER net) and ground.
GPIO_POWER
Will be fixed in revision 1.0.
Due to leakage current reaching one of the transistors i nthe power control section, the
Shutdown
menu entry doesn't work as intended.Workaround: solder a 10k resistor between STM32's pin 50 or D7's pin 1 (
GPIO_POWER
net) and ground.