Open pe1msz opened 4 months ago
Pinnumbering on the DB9 was not the same as on the connector.
I will get more details for you.
From: Wojciech Kaczmarski @.> Sent: Sunday, June 9, 2024 10:15 To: M17-Project/Module_17 @.> Cc: Ruud Kerstens @.>; Author @.> Subject: Re: [M17-Project/Module_17] Pinout of DB-9 can be wrong (Issue #17)
Which pins are wrong?
For the calibration procedure, see this https://github.com/OpenRTX/OpenRTX/issues/184 .
— Reply to this email directly, view it on GitHub https://github.com/M17-Project/Module_17/issues/17#issuecomment-2156382045 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AJOJW2FBDEUGFJUADBWFQI3ZGQFGRAVCNFSM6AAAAABJAV2KDGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJWGM4DEMBUGU . You are receiving this because you authored the thread.Message ID: @.***>
I noticed that a board I got in, has a female connector mounted, which causes some pin-numbers to be wrong.
I use a GM950 Motorola, and that seems to work great sofar (it has a data transmit and a flat audio out).
I am just wondering what the best RX-Post value is on the M17-module (allignable with a multiturn pot)