search

MBRO95 / PortableCellNetwork

Utilize a Raspberry Pi and a Nuand BladeRF to generate your own portable local cell network
https://mbro95.github.io/PortableCellNetwork/
388 stars 94 forks source link

FPGA version: Unknown (FPGA not loaded) #17

Closed al-soluciones closed 5 years ago

al-soluciones commented 5 years ago

Hello Excellent day, I hope not inconvenience,

I'M doing the project https://mbro95.github.io/PortableCellNetwork/ With the Raspberri Pi3, Bladerf x40 and the zip image you have created.

I Have a problem in the Bladerf x40 not able to load the FPGA not to follow command or in which library I can access, I hope not to bother the message that appears to me is the following

FPGA version: Unknown (FPGA not loaded)

Thank You for your attentions

MBRO95 commented 5 years ago

Hi there, although i am not very able to support this project in an ongoing capacity i was able to access some old documentation that i hadn't published here or in the github pages site. I've just added info on the correct firmware and status of bladeRF to be ready for use with YateBTS

https://github.com/MBRO95/PortableCellNetwork/commit/75466aba7a01927d27e4e5d0b17ebb6dca618e4e

MBRO95 commented 5 years ago

You can take a look at that commit and this forum: https://nuand.com/forums/viewtopic.php?f=9&t=3862