Open GoogleCodeExporter opened 9 years ago
I am experiencing this also.
Phone: HTC Incredible
Rom: Sky Raider 2.0.1 (Froyo 2.2 leak)
Basband: 2.05.00.06.11
Build Number: 3.16.605.0 CL203589 release-keys
Kernel Version: 2.6.32.15-g7507bb0 htc-kernel@and18-2 #1
WirelessTether version: 2.0.5-pre4
Same symptoms on pre3
dmesg output:
<4>[ 2937.063568] wlan: wifi_set_power = 1
<6>[ 2937.063842] incrediblec_wifi_power: 1
<4>[ 2937.381378] wlan: wifi_set_carddetect = 1
<6>[ 2937.381378] incrediblec_wifi_set_carddetect: 1
<7>[ 2937.381408] mmc0: card_present 1
<6>[ 2937.381408] mmc0: Slot status change detected (0 -> 1)
<4>[ 2937.382690] wlan: Dongle Host Driver, version 4.218.204.2
<7>[ 2939.931274] mmc0: queuing CIS tuple 0x91 length 3
<6>[ 2939.931671] mmc0: new high speed SDIO card at address 0001
<4>[ 2939.941802] wlan: DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 2940.169860] wlan: firmware version: wl0: May 17 2010 15:15:06 version 4.21
8.207.0
<4>[ 2940.169860]
<4>[ 2940.306396] wlan: Enter set packet filter
<4>[ 2940.307647] wlan: start to add pkt filter 100
<4>[ 2940.308929] wlan: Enter set packet filter
<4>[ 2940.310150] wlan: start to add pkt filter 102
<4>[ 2940.311462] wlan: Enter set packet filter
<4>[ 2940.312713] wlan: start to add pkt filter 104
<4>[ 2940.317047] wlan: dhd_preinit_ioctls:str=0x6e756c6c207061636b657400
<4>[ 2940.326385] wlan: eth0: Broadcom Dongle Host Driver mac=38:e7:d8:7a:cc:75
<4>[ 2943.355621] wlan: get AP_PROFILE_SET
<4>[ 2943.356262] wlan: wl_iw: set ap profile:
<4>[ 2943.356628] wlan: ssid = 'AndroidTether'
<4>[ 2943.356964] wlan: security = 'open'
<4>[ 2943.357604] wlan: key = 'none'
<4>[ 2943.357940] wlan: channel = 6
<4>[ 2943.358276] wlan: max scb = 2
<4>[ 2943.362792] wlan: setting SOFTAP security mode:
<4>[ 2943.363281] wlan: wl_iw: set ap profile:
<4>[ 2943.363616] wlan: ssid = 'AndroidTether'
<4>[ 2943.364227] wlan: security = 'open'
<4>[ 2943.364593] wlan: key = 'none'
<4>[ 2943.364929] wlan: channel = 6
<4>[ 2943.365539] wlan: max scb = 2
<4>[ 2943.367187] wlan: =====================
<4>[ 2943.367553] wlan: wsec & wpa_auth set 'OPEN', result:&d 0
<4>[ 2943.368194] wlan: =====================
<4>[ 2943.369842] wlan: ap setup done
<7>[ 2947.635009] ALS value: 0x0, level: 1 #
<7>[ 2948.105743] ALS value: 0x1, level: 1 #
<7>[ 2950.423919] eth0: no IPv6 routers present
Original comment by christop...@gmail.com
on 30 Jul 2010 at 5:49
Same problem here
Original comment by neilsylv...@gmail.com
on 24 Sep 2010 at 11:26
This is the same exact problem i am experiencing
Original comment by markael....@gmail.com
on 15 Jan 2012 at 5:16
Original issue reported on code.google.com by
TFalw...@gmail.com
on 20 Jul 2010 at 1:55