define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
//#define GAME_BRICKOUT
//#define GAME_INVADERS
//#define GAME_SNAKE
//#define NO_LCD_MENUS
//#define SLIM_LCD_MENUS
define ENCODER_PULSES_PER_STEP 5
define ENCODER_STEPS_PER_MENU_ITEM 1
//#define LCD_SCREEN_ROT_90 // Rotate screen orientation for graphics display by 90 degree clockwise
//#define LCD_SCREEN_ROT_180 // Rotate screen orientation for graphics display by 180 degree clockwise
//#define LCD_SCREEN_ROT_270 // Rotate screen orientation for graphics display by 270 degree clockwise
//#define INVERT_CLICK_BUTTON // Option for invert encoder button logic
//#define INVERT_BACK_BUTTON // Option for invert back button logic if avaible
//#define REVERSE_ENCODER_DIRECTION
//#define REVERSE_MENU_DIRECTION
//#define REVERSE_SELECT_DIRECTION
define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define STATUS_MESSAGE_SCROLLING
//#define LCD_DECIMAL_SMALL_XY
//#define LCD_TIMEOUT_TO_STATUS 15000
//#define LED_CONTROL_MENU
//#define LED_COLOR_PRESETS // Enable the Preset Color menu option
//#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
define LED_USER_PRESET_RED 255 // User defined RED value
define LED_USER_PRESET_GREEN 255 // User defined GREEN value
define LED_USER_PRESET_BLUE 255 // User defined BLUE value
define LED_USER_PRESET_WHITE 255 // User defined WHITE value
define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
//#define INCH_MODE_SUPPORT
//#define JSON_OUTPUT
//#define SCAD_MESH_OUTPUT
//#define PINS_DEBUGGING
//#define DEBUG_FEATURE
//#define USE_WATCHDOG
//#define WATCHDOG_RESET_MANUAL
//#define START_GCODE
Please, follow this template when opening a new issue: this will help us a lot in the process of helping you.
Issue description
Compile errors, see below
Compile errors
`HAL.cpp:159:48: error: too many arguments to function 'void HAL_timer_start(uint8_t)'
HAL_timer_start(TONE_TIMER_NUM, 2 * frequency);`
Firmware version
4.4.0 with IDE 1.8.9 (have also tried 1.8.10)
My setup
/**
/**
/***
define CONFIGURATION_OVERALL
/***
define SERIAL_PORT_1 -1
define BAUDRATE_1 115200
define SERIAL_PORT_2 -2
define BAUDRATE_2 115200
define BLOCK_BUFFER_SIZE 32
define MAX_CMD_SIZE 96
define BUFSIZE 8
define TX_BUFFER_SIZE 32
define RX_BUFFER_SIZE 1024
define SERIAL_XON_XOFF
//#define SERIAL_STATS_MAX_RX_QUEUED //#define SERIAL_STATS_DROPPED_RX
define STRING_CONFIG_AUTHOR "(none, default config)"
define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
define KILL_METHOD 0
define NO_TIMEOUTS 1000
//#define ADVANCED_OK //#define EMERGENCY_PARSER
define FASTER_GCODE_PARSER
define FASTER_GCODE_EXECUTE
define HOST_KEEPALIVE_FEATURE
define DEFAULT_KEEPALIVE_INTERVAL 2
define MOTHERBOARD BOARD_ULTRATRONICS
define MECHANISM MECH_CARTESIAN
define POWER_SUPPLY 0
//#define POWER_NAME "Generic"
define PS_DEFAULT_OFF false
define DELAY_AFTER_POWER_ON 5
define POWER_TIMEOUT 30
define EXTRUDERS 2
define DRIVER_EXTRUDERS 2
/*****
define TEMP_SENSOR_HE0 1
define TEMP_SENSOR_HE1 1
define TEMP_SENSOR_HE2 0
define TEMP_SENSOR_HE3 0
define TEMP_SENSOR_HE4 0
define TEMP_SENSOR_HE5 0
define TEMP_SENSOR_BED0 0
define TEMP_SENSOR_BED1 0
define TEMP_SENSOR_BED2 0
define TEMP_SENSOR_BED3 0
define TEMP_SENSOR_CHAMBER0 0
define TEMP_SENSOR_CHAMBER1 0
define TEMP_SENSOR_CHAMBER2 0
define TEMP_SENSOR_CHAMBER3 0
define TEMP_SENSOR_COOLER 0
define THERMISTOR_SERIES_RS 4700
define T9_NAME "User sensor"
define T9_R25 100000
define T9_BETA 4036
//#define DHT_SENSOR
define DHT_TYPE 11
define TEMP_SENSOR_AD595_OFFSET 0
define TEMP_SENSOR_AD595_GAIN 1
define DUMMY_THERMISTOR_998_VALUE 25
define DUMMY_THERMISTOR_999_VALUE 100
define TEMP_RESIDENCY_TIME 10 // (seconds)
define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
define HOTEND_0_MAXTEMP 275
define HOTEND_1_MAXTEMP 275
define HOTEND_2_MAXTEMP 275
define HOTEND_3_MAXTEMP 275
define HOTEND_4_MAXTEMP 275
define HOTEND_5_MAXTEMP 275
define BED_MAXTEMP 150
define CHAMBER_MAXTEMP 150
define COOLER_MAXTEMP 150
define HOTEND_0_MINTEMP 5
define HOTEND_1_MINTEMP 5
define HOTEND_2_MINTEMP 5
define HOTEND_3_MINTEMP 5
define HOTEND_4_MINTEMP 5
define HOTEND_5_MINTEMP 5
define BED_MINTEMP 5
define CHAMBER_MINTEMP 5
define COOLER_MINTEMP 5
define MAX_CONSECUTIVE_LOW_TEMP 2
define PREHEAT_1_LABEL "PLA"
define PREHEAT_1_TEMP_HOTEND 190
define PREHEAT_1_TEMP_BED 60
define PREHEAT_1_TEMP_CHAMBER 0
define PREHEAT_1_FAN_SPEED 255
define PREHEAT_2_LABEL "ABS"
define PREHEAT_2_TEMP_HOTEND 240
define PREHEAT_2_TEMP_BED 100
define PREHEAT_2_TEMP_CHAMBER 50
define PREHEAT_2_FAN_SPEED 255
define PREHEAT_3_LABEL "GUM"
define PREHEAT_3_TEMP_HOTEND 230
define PREHEAT_3_TEMP_BED 60
define PREHEAT_3_TEMP_CHAMBER 50
define PREHEAT_3_FAN_SPEED 255
//#define AUTOTEMP
define AUTOTEMP_OLDWEIGHT 0.98
//#define TEMP_STAT_LEDS
define HOTEND_PWM_FREQUENCY 250
define BED_PWM_FREQUENCY 100
define CHAMBER_PWM_FREQUENCY 100
define COOLER_PWM_FREQUENCY 100
define PIDTEMP true
define POWER_MAX 255
define POWER_DRIVE_MIN 40
define POWER_DRIVE_MAX 230
define HOTEND_HYSTERESIS 2
define HOTEND_CHECK_INTERVAL 100
define PID_FUNCTIONAL_RANGE 10
define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
//#define PID_ADD_EXTRUSION_RATE
define LPQ_MAX_LEN 50
define HOTEND_Kp {40,40,40,40,40,40}
define HOTEND_Ki {7,7,7,7,7,7}
define HOTEND_Kd {60,60,60,60,60,60}
define HOTEND_Kc {100,100,100,100,100,100}
define PIDTEMPBED false
define BED_POWER_MAX 255
define BED_POWER_DRIVE_MIN 40
define BED_POWER_DRIVE_MAX 230
define BED_HYSTERESIS 2
define BED_CHECK_INTERVAL 500
define BED_Kp {10,10,10,10}
define BED_Ki {1,1,1,1}
define BED_Kd {300,300,300,300}
define PIDTEMPCHAMBER false
define CHAMBER_POWER_MAX 255
define CHAMBER_POWER_DRIVE_MIN 80
define CHAMBER_POWER_DRIVE_MAX 255
define CHAMBER_HYSTERESIS 2
define CHAMBER_CHECK_INTERVAL 500
define CHAMBER_Kp {10,10,10,10}
define CHAMBER_Ki {1,1,1,1}
define CHAMBER_Kd {300,300,300,300}
define PIDTEMPCOOLER false
define COOLER_POWER_MAX 255
define COOLER_POWER_DRIVE_MIN 80
define COOLER_POWER_DRIVE_MAX 255
define COOLER_HYSTERESIS 2
define COOLER_CHECK_INTERVAL 500
define COOLER_Kp 10
define COOLER_Ki 1
define COOLER_Kd 305
define INVERTED_HEATER_PINS false
define INVERTED_BED_PIN false
define INVERTED_CHAMBER_PIN false
define INVERTED_COOLER_PIN false
define THERMAL_PROTECTION_HOTENDS false
define THERMAL_PROTECTION_BED false
define THERMAL_PROTECTION_CHAMBER false
define THERMAL_PROTECTION_COOLER false
define THERMAL_PROTECTION_PERIOD 40
define THERMAL_PROTECTION_HYSTERESIS 4
//#define ADAPTIVE_FAN_SPEED
define WATCH_HOTEND_PERIOD 20
define WATCH_HOTEND_INCREASE 2
define WATCH_BED_PERIOD 60
define WATCH_BED_INCREASE 2
define WATCH_CHAMBER_PERIOD 60
define WATCH_CHAMBER_INCREASE 2
define WATCH_COOLER_PERIOD 60
define WATCH_COOLER_INCREASE 2
define PREVENT_COLD_EXTRUSION
define EXTRUDE_MINTEMP 170
//#define PREVENT_LENGTHY_EXTRUDE
define EXTRUDE_MAXLENGTH 400
define SAFETYTIMER_TIME_MINS 30
/***
define KNOWN_MECH
define CUSTOM_MACHINE_NAME "Generic"
define ENDSTOPPULLUP_XMIN true
define ENDSTOPPULLUP_YMIN true
define ENDSTOPPULLUP_ZMIN true
define ENDSTOPPULLUP_XMAX true
define ENDSTOPPULLUP_YMAX true
define ENDSTOPPULLUP_ZMAX true
define ENDSTOPPULLUP_X2MIN true
define ENDSTOPPULLUP_Y2MIN true
define ENDSTOPPULLUP_Z2MIN true
define ENDSTOPPULLUP_Z3MIN true
define ENDSTOPPULLUP_X2MAX true
define ENDSTOPPULLUP_Y2MAX true
define ENDSTOPPULLUP_Z2MAX true
define ENDSTOPPULLUP_Z3MAX true
define ENDSTOPPULLUP_ZPROBE true
define X_MIN_ENDSTOP_LOGIC false
define Y_MIN_ENDSTOP_LOGIC false
define Z_MIN_ENDSTOP_LOGIC false
define X_MAX_ENDSTOP_LOGIC false
define Y_MAX_ENDSTOP_LOGIC false
define Z_MAX_ENDSTOP_LOGIC false
define X2_MIN_ENDSTOP_LOGIC false
define Y2_MIN_ENDSTOP_LOGIC false
define Z2_MIN_ENDSTOP_LOGIC false
define Z3_MIN_ENDSTOP_LOGIC false
define X2_MAX_ENDSTOP_LOGIC false
define Y2_MAX_ENDSTOP_LOGIC false
define Z2_MAX_ENDSTOP_LOGIC false
define Z3_MAX_ENDSTOP_LOGIC false
define Z_PROBE_ENDSTOP_LOGIC false
//#define ENDSTOP_INTERRUPTS_FEATURE
define Z_PROBE_SERVO_NR 0
define Z_SERVO_ANGLES {0,0}
//#define PROBE_MANUALLY //#define Z_PROBE_FIX_MOUNTED //#define BLTOUCH //#define Z_PROBE_SENSORLESS //#define Z_PROBE_SLED
define SLED_DOCKING_OFFSET 5
define X_PROBE_OFFSET_FROM_NOZZLE 0
define Y_PROBE_OFFSET_FROM_NOZZLE 0
define Z_PROBE_OFFSET_FROM_NOZZLE -1
define XY_PROBE_SPEED 8000
define Z_PROBE_SPEED_FAST 1000
define Z_PROBE_SPEED_SLOW 500
define Z_PROBE_REPETITIONS 1
define Z_MIN_PROBE_REPEATABILITY_TEST
//#define PAUSE_BEFORE_DEPLOY_STOW
define Z_PROBE_DEPLOY_HEIGHT 15
define Z_PROBE_BETWEEN_HEIGHT 10
define Z_PROBE_AFTER_PROBING 0
define Z_PROBE_LOW_POINT -5
define Z_PROBE_OFFSET_RANGE_MIN -50
define Z_PROBE_OFFSET_RANGE_MAX 50
//#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF // Turn fans off when probing //#define LCD_BED_LEVELING
define LCD_Z_STEP 0.025
define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z MIN POS for LCD Z adjustment
//#define MESH_EDIT_MENU // Add a menu to edit mesh points //#define LEVEL_BED_CORNERS
define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
define X_HOME_DIR -1
define Y_HOME_DIR -1
define Z_HOME_DIR -1
define MIN_Z_HEIGHT_FOR_HOMING 0
define X_ENABLE_ON 0
define Y_ENABLE_ON 0
define Z_ENABLE_ON 0
define E_ENABLE_ON 0
define INVERT_X_STEP_PIN false
define INVERT_Y_STEP_PIN false
define INVERT_Z_STEP_PIN false
define INVERT_E_STEP_PIN false
define INVERT_X_DIR false
define INVERT_Y_DIR false
define INVERT_Z_DIR false
define INVERT_E0_DIR false
define INVERT_E1_DIR false
define INVERT_E2_DIR false
define INVERT_E3_DIR false
define INVERT_E4_DIR false
define INVERT_E5_DIR false
define DISABLE_X false
define DISABLE_Y false
define DISABLE_Z false
define DISABLE_E false
//#define DISABLE_INACTIVE_EXTRUDER
define X_MAX_POS 200
define X_MIN_POS 0
define Y_MAX_POS 200
define Y_MIN_POS 0
define Z_MAX_POS 200
define Z_MIN_POS 0
define E_MIN_POS 0
define AXIS_RELATIVE_MODES {false, false, false, false}
//#define Z_SAFE_HOMING
define Z_SAFE_HOMING_X_POINT 100
define Z_SAFE_HOMING_Y_POINT 100
//#define MESH_BED_LEVELING //#define AUTO_BED_LEVELING_UBL //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_3POINT //#define MESH_EDIT_GFX_OVERLAY
define MIN_PROBE_EDGE 10
//#define G26_MESH_VALIDATION
define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
define MESH_TEST_HOTEND_TEMP 200 // (c) Default nozzle temperature for the G26 Mesh Validation Tool.
define MESH_TEST_BED_TEMP 60 // (c) Default bed temperature for the G26 Mesh Validation Tool.
define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
//#define MESH_G28_REST_ORIGIN
define UBL_MESH_EDIT_MOVES_Z
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5
define GRID_MAX_POINTS_X 3
define GRID_MAX_POINTS_Y 3
//#define PROBE_Y_FIRST //#define ABL_BILINEAR_SUBDIVISION
define BILINEAR_SUBDIVISIONS 3
//#define Z_PROBE_END_SCRIPT "G1 Z10 F8000\nG1 X10 Y10\nG1 Z0.5" //#define ENABLE_LEVELING_FADE_HEIGHT //#define BED_CENTER_AT_0_0 //#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0
define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,4000,625,625,625,625,625,625}
define DEFAULT_AXIS_STEPS_PER_UNIT_E {625, 625, 625, 625}
define DEFAULT_MAX_FEEDRATE {300,300,2,100,100,100,100,100,100}
define DEFAULT_MAX_FEEDRATE_E {100, 100, 100, 100}
define MANUAL_FEEDRATE {10060,10060,260,1060}
define SHORT_MANUAL_Z_MOVE 0.025
define DEFAULT_MIN_FEEDRATE 0.0
define DEFAULT_MIN_TRAVEL_FEEDRATE 0.0
define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
define DEFAULT_MAX_ACCELERATION {3000,3000,50,3000,3000,3000,3000,3000,3000}
define DEFAULT_MAX_ACCELERATION_E {1000, 1000, 1000, 1000}
define DEFAULT_RETRACT_ACCELERATION {10000,10000,10000,10000,10000,10000}
define DEFAULT_ACCELERATION 3000
define DEFAULT_TRAVEL_ACCELERATION 3000
define DEFAULT_XJERK 10
define DEFAULT_YJERK 10
define DEFAULT_ZJERK 0.4
define DEFAULT_EJERK {5,5,5,5,5,5}
define HOMING_FEEDRATE_X (100*60)
define HOMING_FEEDRATE_Y (100*60)
define HOMING_FEEDRATE_Z (2*60)
//#define SLOW_HOMING
define X_HOME_BUMP_MM 5
define Y_HOME_BUMP_MM 5
define Z_HOME_BUMP_MM 2
define HOMING_BUMP_DIVISOR {5,5,2}
define HOTEND_OFFSET_X {0,0,0,0}
define HOTEND_OFFSET_Y {0,0,0,0}
define HOTEND_OFFSET_Z {0,0,0,0}
//#define HYSTERESIS_FEATURE
define HYSTERESIS_AXIS_MM {0,0,0}
define HYSTERESIS_CORRECTION 1
/*****
define LCD_LANGUAGE en
//#define LCD_LANGUAGE_1 en //#define LCD_LANGUAGE_2 en //#define LCD_LANGUAGE_3 en //#define LCD_LANGUAGE_4 en
define LCD_CHARSET_HD44780 JAPANESE
define LCD_INFO_SCREEN_STYLE 0
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define ULTIMAKERCONTROLLER //#define ULTIPANEL //#define PANEL_ONE //#define G3D_PANEL //#define RIGIDBOT_PANEL //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. //#define ULTRA_LCD //#define RA_CONTROL_PANEL //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 //#define LCM1602 //#define LCD_I2C_PANELOLU2 //#define LCD_I2C_VIKI //#define RADDS_DISPLAY //#define SAV_3DLCD //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
define REPRAPWORLD_GRAPHICAL_LCD
//#define VIKI2 //#define miniVIKI //#define MINIPANEL //#define MAKRPANEL //#define ELB_FULL_GRAPHIC_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER //#define WANHAO_D6_OLED //#define CARTESIO_UI //#define LCD_FOR_MELZI //#define U8GLIB_SSD1306 //#define SAV_3DGLCD //#define U8GLIB_SSD1306 //#define U8GLIB_SH1106 //#define ULTI_CONTROLLER //#define OLED_PANEL_TINYBOY2 //#define MKS_MINI_12864 //#define FYSETC_MINI_12864 //#define CR10_STOCKDISPLAY //#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 //#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller //#define AZSMZ_12864 //#define SILVER_GATE_GLCD_CONTROLLER //#define NEXTION
define NEXTION_SERIAL 1
define NEXTION_MAX_MESSAGE_LENGTH 30
//#define NEXTION_GFX
define NEXTION_FIRMWARE_FILE "mk4duo.tft"
define SHOW_BOOTSCREEN
define BOOTSCREEN_TIMEOUT 2500
define BOOTSCREEN_MKLOGO_HIGH // Show a hight MK4duo logo on the Boot Screen (disable it saving 399 bytes of flash)
//#define BOOTSCREEN_MKLOGO_ANIMATED // Animated MK4duo logo. Costs ~3260 (or ~940) bytes of PROGMEM. //#define SHOW_CUSTOM_BOOTSCREEN //#define CUSTOM_STATUS_SCREEN_IMAGE
define XYZ_HOLLOW_FRAME
define MENU_HOLLOW_FRAME
//#define USE_BIG_EDIT_FONT //#define USE_SMALL_INFOFONT //#define DOGM_SPI_DELAY_US 5 //#define OVERLAY_GFX_REVERSE //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define GAME_BRICKOUT //#define GAME_INVADERS //#define GAME_SNAKE //#define NO_LCD_MENUS //#define SLIM_LCD_MENUS
define ENCODER_PULSES_PER_STEP 5
define ENCODER_STEPS_PER_MENU_ITEM 1
//#define LCD_SCREEN_ROT_90 // Rotate screen orientation for graphics display by 90 degree clockwise //#define LCD_SCREEN_ROT_180 // Rotate screen orientation for graphics display by 180 degree clockwise //#define LCD_SCREEN_ROT_270 // Rotate screen orientation for graphics display by 270 degree clockwise //#define INVERT_CLICK_BUTTON // Option for invert encoder button logic //#define INVERT_BACK_BUTTON // Option for invert back button logic if avaible //#define REVERSE_ENCODER_DIRECTION //#define REVERSE_MENU_DIRECTION //#define REVERSE_SELECT_DIRECTION
define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
define ULTIPANEL_FEEDMULTIPLY
define SPEAKER
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
define LCD_ALLIGATOR_VOLTAGE_LEVEL 1
define LCD_INFO_MENU
//#define STATUS_MESSAGE_SCROLLING //#define LCD_DECIMAL_SMALL_XY //#define LCD_TIMEOUT_TO_STATUS 15000 //#define LED_CONTROL_MENU //#define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
define LED_USER_PRESET_RED 255 // User defined RED value
define LED_USER_PRESET_GREEN 255 // User defined GREEN value
define LED_USER_PRESET_BLUE 255 // User defined BLUE value
define LED_USER_PRESET_WHITE 255 // User defined WHITE value
define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
//#define LCD_PROGRESS_BAR
define PROGRESS_BAR_BAR_TIME 5000U
define PROGRESS_BAR_MSG_TIME 1500U
define PROGRESS_MSG_EXPIRE 0
//#define PROGRESS_MSG_ONCE //#define LCD_PROGRESS_BAR_TEST //#define CUSTOM_USER_MENUS
define USER_SCRIPT_DONE "M117 User Script Done"
define USER_DESC_1 "Home & ABL"
define USER_GCODE_1 "G28\nG29"
define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
define USER_DESC_4 "Heat Bed/Home/Level"
define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
define USER_DESC_5 "Home & Info"
define USER_GCODE_5 "G28\nM503"
/*****
define X_DRIVER_TYPE DRV8825
define Y_DRIVER_TYPE DRV8825
define Z_DRIVER_TYPE DRV8825
define X2_DRIVER_TYPE A4988
define Y2_DRIVER_TYPE A4988
define Z2_DRIVER_TYPE A4988
define Z3_DRIVER_TYPE A4988
define E0_DRIVER_TYPE DRV8825
define E1_DRIVER_TYPE DRV8825
define E2_DRIVER_TYPE A4988
define E3_DRIVER_TYPE A4988
define E4_DRIVER_TYPE A4988
define E5_DRIVER_TYPE A4988
define SOFT_PWM_SPEED 0
define FAN_MIN_PWM 0
define FAN_MAX_PWM 255
//#define INVERTED_FAN_PINS
define FAN_PWM_FREQUENCY 250
//#define FAN_KICKSTART_TIME 0
define AUTO_FAN {-1,0,-1,-1,-1,-1}
define HOTEND_AUTO_FAN_TEMPERATURE 50
define HOTEND_AUTO_FAN_SPEED 255
define HOTEND_AUTO_FAN_MIN_SPEED 0
define CONTROLLERFAN_SECS 60
define CONTROLLERFAN_SPEED 255
define CONTROLLERFAN_MIN_SPEED 0
//#define TACHOMETRIC
define TOOL_CHANGE_Z_RAISE 1
//#define TOOL_CHANGE_PARK //#define TOOL_CHANGE_NO_RETURN //#define TOOL_CHANGE_FIL_SWAP
define TOOL_CHANGE_FIL_SWAP_LENGTH 20
define TOOL_CHANGE_FIL_SWAP_PURGE 2
define TOOL_CHANGE_FIL_SWAP_RETRACT_SPEED 3000
define TOOL_CHANGE_FIL_SWAP_PRIME_SPEED 600
//#define VOLUMETRIC_EXTRUSION //#define VOLUMETRIC_DEFAULT_ON
define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
//#define SINGLENOZZLE //#define BARICUDA //#define EXT_SOLENOID //#define COLOR_MIXING_EXTRUDER
define MIXING_STEPPERS 2
define MIXING_VIRTUAL_TOOLS 16
//#define MKR4 //#define INVERTED_RELE_PINS //#define MKR6 //#define INVERTED_RELE_PINS //#define MKR12 //#define INVERTED_RELE_PINS //#define MKSE6
define MKSE6_SERVO_INDEX 0
define MKSE6_SERVOPOS_E0 -60
define MKSE6_SERVOPOS_E1 -30
define MKSE6_SERVOPOS_E2 0
define MKSE6_SERVOPOS_E3 30
define MKSE6_SERVOPOS_E4 60
define MKSE6_SERVOPOS_E5 90
define MKSE6_SERVO_DELAY 1000
//#define PRUSA_MMU2
define MMU2_SERIAL 1
//#define MMU2_MODE_12V
define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
define MMU2_LOAD_TO_NOZZLE_SEQUENCE { 7.2, 562 }, { 14.4, 871 }, { 36.0, 1393 }, { 14.4, 871 }, { 50.0, 198 }
define MMU2_RAMMING_SEQUENCE { 1.0, 1000 }, { 1.0, 1500 }, { 2.0, 2000 }, { 1.5, 3000 }, { 2.5, 4000 }, { -15.0, 5000 }, { -14.0, 1200 }, { -6.0, 600 }, { 10.0, 700 }, { -10.0, 400 }, { -50.0, 2000 }
//#define DONDOLO_SINGLE_MOTOR //#define DONDOLO_DUAL_MOTOR
define DONDOLO_SERVO_INDEX 0
define DONDOLO_SERVOPOS_E0 120
define DONDOLO_SERVOPOS_E1 10
define DONDOLO_SERVO_DELAY 1000
//#define IDLE_OOZING_PREVENT
define IDLE_OOZING_MINTEMP 190
define IDLE_OOZING_FEEDRATE 50 //default feedrate for retracting (mm/s)
define IDLE_OOZING_SECONDS 5
define IDLE_OOZING_LENGTH 15 //default retract length (positive mm)
define IDLE_OOZING_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
define IDLE_OOZING_RECOVER_FEEDRATE 50 //default feedrate for recovering from retraction (mm/s)
//#define EXTRUDER_RUNOUT_PREVENT
define EXTRUDER_RUNOUT_MINTEMP 190
define EXTRUDER_RUNOUT_SECONDS 30
define EXTRUDER_RUNOUT_SPEED 1500 // mm/m
define EXTRUDER_RUNOUT_EXTRUDE 5 // mm
//#define LIN_ADVANCE
define LIN_ADVANCE_K 0.22
//#define WORKSPACE_OFFSETS
define DEFAULT_STEPPER_DEACTIVE_TIME 120
define DISABLE_INACTIVE_X
define DISABLE_INACTIVE_Y
define DISABLE_INACTIVE_Z
define DISABLE_INACTIVE_E
define MIN_SOFTWARE_ENDSTOPS
define MAX_SOFTWARE_ENDSTOPS
define ENDSTOPS_ONLY_FOR_HOMING
//#define ENABLED_ALL_SIX_ENDSTOP //#define SD_ABORT_ON_ENDSTOP_HIT //#define G38_PROBE_TARGET
define G38_MINIMUM_MOVE 0.0275
define ENABLE_SERVOS
define NUM_SERVOS 1
//#define DEACTIVATE_SERVOS_AFTER_MOVE
define SERVO_DEACTIVATION_DELAY 300
//#define Z_LATE_ENABLE
define SLOWDOWN
//#define QUICK_HOME
define HOME_Y_BEFORE_X
//#define FORCE_HOME_XY_BEFORE_Z //#define BABYSTEPPING //#define BABYSTEP_XY
define BABYSTEP_INVERT_Z false
define BABYSTEP_MULTIPLICATOR 1
//#define BABYSTEP_DISPLAY_TOTAL //#define BABYSTEP_ZPROBE_OFFSET //#define DOUBLECLICK_FOR_Z_BABYSTEPPING
define DOUBLECLICK_MAX_INTERVAL 1250U
//#define BABYSTEP_ZPROBE_GFX_OVERLAY //#define BABYSTEP_ZPROBE_GFX_REVERSE //#define FWRETRACT
define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
define RETRACT_LENGTH 3 // Default retract length (positive mm)
define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)
define RETRACT_ZLIFT 0 // Default retract Z-lift
define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering)
define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change)
define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s)
define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s)
//#define DUAL_X_CARRIAGE
define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
define X1_MAX_POS X_MAX_POS // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
define DEFAULT_DUPLICATION_X_OFFSET 100
//#define X_TWO_STEPPER_DRIVERS
define INVERT_X2_VS_X_DIR false
//#define X_TWO_ENDSTOPS //#define Y_TWO_STEPPER_DRIVERS
define INVERT_Y2_VS_Y_DIR false
//#define Y_TWO_ENDSTOPS //#define Z_TWO_STEPPER_DRIVERS
define INVERT_Z2_VS_Z_DIR false
//#define Z_TWO_ENDSTOPS //#define Z_THREE_STEPPER_DRIVERS
define INVERT_Z2_VS_Z_DIR false
define INVERT_Z3_VS_Z_DIR false
//#define Z_THREE_ENDSTOPS //#define Z_STEPPER_AUTO_ALIGN
define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
//#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
define Z_STEPPER_ALIGN_AMP 1.0
define Z_STEPPER_ALIGN_ITERATIONS 3
define RESTORE_LEVELING_AFTER_G34
define G34_MAX_GRADE 5
define Z_STEPPER_ALIGN_ACC 0.02
//#define XY_FREQUENCY_LIMIT 15 //#define SF_ARC_FIX //#define BLTOUCH_DELAY 500 //#define BLTOUCH_HIGH_SPEED_MODE //#define BLTOUCH_FORCE_SW_MODE
define BLTOUCH_MODE_5V false
//#define BLTOUCH_FORCE_MODE //#define BLTOUCH_LCD_VOLTAGE_MENU //#define FILAMENT_WIDTH_SENSOR
define FILAMENT_SENSOR_EXTRUDER_NUM 0
define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it
define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
//#define FILAMENT_LCD_DISPLAY //#define FILAMENT_RUNOUT_SENSOR //#define FILAMENT_RUNOUT_DAV_SYSTEM //#define EXTRUDER_ENCODER_CONTROL
define FIL_RUNOUT_0_LOGIC false
define FIL_RUNOUT_1_LOGIC false
define FIL_RUNOUT_2_LOGIC false
define FIL_RUNOUT_3_LOGIC false
define FIL_RUNOUT_4_LOGIC false
define FIL_RUNOUT_5_LOGIC false
define FIL_RUNOUT_0_PULLUP true
define FIL_RUNOUT_1_PULLUP true
define FIL_RUNOUT_2_PULLUP true
define FIL_RUNOUT_3_PULLUP true
define FIL_RUNOUT_4_PULLUP true
define FIL_RUNOUT_5_PULLUP true
define FILAMENT_RUNOUT_DISTANCE_MM 0
define FILAMENT_RUNOUT_THRESHOLD 5
define FILAMENT_RUNOUT_SCRIPT "M600"
//#define POWER_CONSUMPTION
define POWER_VOLTAGE 12.00 //(V) The power supply OUT voltage
define POWER_SENSITIVITY 0.066 //(V/A) How much increase V for 1A of increase
define POWER_OFFSET 0.005 //(A) Help to get 0A when no load is connected.
define POWER_ZERO 2.500 //(V) The /\V coming out from the sensor when no current flow.
define POWER_ERROR 0.0 //(%) Ammortize measure error.
define POWER_EFFICIENCY 100.0 //(%) The power efficency of the power supply
//#define POWER_CONSUMPTION_LCD_DISPLAY //#define FLOWMETER_SENSOR
define FLOWMETER_MAXFLOW 6.0 // Liters per minute max
define FLOWMETER_MAXFREQ 55 // frequency of pulses at max flow
//#define MINFLOW_PROTECTION 4 //#define DOOR_OPEN_FEATURE
define DOOR_OPEN_LOGIC false
define PULLUP_DOOR_OPEN true
//#define POWER_CHECK
define POWER_CHECK_LOGIC false
define PULLUP_POWER_CHECK true
//#define PCF8574_EXPANSION_IO
define PCF8574_ADDRESS 0x39
define EEPROM_SETTINGS
define EEPROM_CHITCHAT
//#define DISABLE_M503 //#define EEPROM_AUTO_INIT //#define EEPROM_I2C //#define EEPROM_SPI //#define EEPROM_SD
define EEPROM_FLASH
//#define SDSUPPORT //#define USB_FLASH_DRIVE_SUPPORT (NOT USED FOR NOW!!!) //#define ADVANCED_SD_COMMAND
define SD_HALF_SPEED
//#define SD_QUARTER_SPEED //#define SD_EIGHTH_SPEED //#define SD_SIXTEENTH_SPEED //#define SD_CHECK_AND_RETRY //#define SD_EXTENDED_DIR //#define SD_DISABLED_DETECT //#define SD_DETECT_INVERTED
define SD_FINISHED_STEPPERRELEASE true // if sd support and the file is finished: disable steppers?
define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
//#define MENU_ADDAUTOSTART //#define SCROLL_LONG_FILENAMES //#define SDCARD_SORT_ALPHA
define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
define FOLDER_SORTING -1 // -1=above 0=none 1=below
define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M36 g-code.
define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
//#define SD_RESTART_FILE // Uncomment to enable
define SD_RESTART_FILE_SAVE_TIME 1
define SD_RESTART_FILE_PURGE_LEN 20 // Purge when restart
define SD_RESTART_FILE_RETRACT_LEN 1 // Retract when restart
//#define PHOTO_GCODE //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J)
define PHOTO_SWITCH_MS 50 // (ms) (M240 D)
//#define CHDK
define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
//#define RFID_MODULE
define RFID_SERIAL 1
//#define BLINKM //#define RGB_LED //#define RGBW_LED //#define PCA9632 //#define NEOPIXEL_LED
define NEOPIXEL_TYPE NEO_GRB
define NEOPIXEL_PIXELS 16
define NEOPIXEL_IS_SEQUENTIAL
define NEOPIXEL_BRIGHTNESS 127
//#define NEOPIXEL_STARTUP_TEST //#define PRINTER_EVENT_LEDS //#define LASER //#define CNCROUTER //#define CASE_LIGHT
define INVERT_CASE_LIGHT false
define CASE_LIGHT_DEFAULT_ON false
define CASE_LIGHT_DEFAULT_BRIGHTNESS 255
//#define CASE_LIGHT_USE_NEOPIXEL
define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 }
define DOUBLE_QUAD_STEPPING true
//#define JUNCTION_DEVIATION
define JUNCTION_DEVIATION_MM 0.02
//#define BEZIER_JERK_CONTROL
define MINIMUM_STEPPER_PULSE 0
define MAXIMUM_STEPPER_RATE 500000
define DIRECTION_STEPPER_DELAY 0
//#define ADAPTIVE_STEP_SMOOTHING
define X_MICROSTEPS 16
define Y_MICROSTEPS 16
define Z_MICROSTEPS 16
define E0_MICROSTEPS 16
define E1_MICROSTEPS 16
define E2_MICROSTEPS 16
define E3_MICROSTEPS 16
define E4_MICROSTEPS 16
define E5_MICROSTEPS 16
define X_CURRENT 800
define Y_CURRENT 800
define Z_CURRENT 800
define E0_CURRENT 800
define E1_CURRENT 800
define E2_CURRENT 800
define E3_CURRENT 800
define E4_CURRENT 800
define E5_CURRENT 800
define DIGIPOT_MOTOR_CURRENT {135, 135, 135, 135, 135}
define PWM_MOTOR_CURRENT {1200, 1000, 1000}
//#define DIGIPOT_I2C
define DIGIPOT_I2C_NUM_CHANNELS 8
define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
//#define SERVICE_NAME_1 "Service 1" //#define SERVICE_TIME_1 100 //#define SERVICE_NAME_2 "Service 2" //#define SERVICE_TIME_2 100 //#define SERVICE_NAME_3 "Service 3" //#define SERVICE_TIME_3 100
define SERVICE_WARNING_BUZZES 3
define NUM_POSITON_SLOTS 1
define DEFAULT_MIN_SEGMENT_TIME 20000
//#define ARC_SUPPORT
define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
define MIN_STEPS_PER_SEGMENT 6
//#define M100_FREE_MEMORY_WATCHER
define M100_FREE_MEMORY_DUMPER
define M100_FREE_MEMORY_CORRUPTOR
//#define NOZZLE_CLEAN_FEATURE
define NOZZLE_CLEAN_STROKES 12
define NOZZLE_CLEAN_TRIANGLES 3
define NOZZLE_CLEAN_START_POINT {30,30,1}
define NOZZLE_CLEAN_END_POINT {100,60,1}
define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
define NOZZLE_CLEAN_CIRCLE_FN 10
define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
define NOZZLE_CLEAN_GOBACK
//#define NOZZLE_CLEAN_NO_Z //#define NOZZLE_PARK_FEATURE
define NOZZLE_PARK_POINT {10,10,20}
define NOZZLE_PARK_XY_FEEDRATE 100
define NOZZLE_PARK_Z_FEEDRATE 5
//#define ADVANCED_PAUSE_FEATURE
define PAUSE_PARK_RETRACT_FEEDRATE 20
define PAUSE_PARK_RETRACT_LENGTH 5
define PAUSE_PARK_UNLOAD_FEEDRATE 50
define PAUSE_PARK_UNLOAD_LENGTH 100
define PAUSE_PARK_SLOW_LOAD_FEEDRATE 6
define PAUSE_PARK_SLOW_LOAD_LENGTH 5
define PAUSE_PARK_FAST_LOAD_FEEDRATE 50
define PAUSE_PARK_FAST_LOAD_LENGTH 100
define PAUSE_PARK_PURGE_FEEDRATE 5
define PAUSE_PARK_PURGE_LENGTH 50
define FILAMENT_UNLOAD_RETRACT_LENGTH 10
define FILAMENT_UNLOAD_DELAY 5000
define FILAMENT_UNLOAD_PURGE_LENGTH 8
define PAUSE_PARK_NOZZLE_TIMEOUT 45
define PAUSE_PARK_PRINTER_OFF 5
define PAUSE_PARK_NUMBER_OF_ALERT_BEEPS 5
define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define INCH_MODE_SUPPORT //#define JSON_OUTPUT //#define SCAD_MESH_OUTPUT //#define PINS_DEBUGGING //#define DEBUG_FEATURE //#define USE_WATCHDOG //#define WATCHDOG_RESET_MANUAL //#define START_GCODE
define START_PRINTING_SCRIPT "G28\nG1 Z10 F8000"
//#define STOP_GCODE
define STOP_PRINTING_SCRIPT "G28\nM107\nM104 T0 S0\nM140 S0\nM84\nM81"
define PROPORTIONAL_FONT_RATIO 1
/****
define X_SENSE_RESISTOR 91
define X2_SENSE_RESISTOR 91
define Y_SENSE_RESISTOR 91
define Y2_SENSE_RESISTOR 91
define Z_SENSE_RESISTOR 91
define Z2_SENSE_RESISTOR 91
define Z3_SENSE_RESISTOR 91
define E0_SENSE_RESISTOR 91
define E1_SENSE_RESISTOR 91
define E2_SENSE_RESISTOR 91
define E3_SENSE_RESISTOR 91
define E4_SENSE_RESISTOR 91
define E5_SENSE_RESISTOR 91
define R_SENSE 0.11 // R_sense resistor
define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
//#define TMC_USE_SW_SPI //#define SENSORLESS_HOMING
define X_STALL_SENSITIVITY 8
define Y_STALL_SENSITIVITY 8
define Z_STALL_SENSITIVITY 8
//#define SPI_ENDSTOPS //#define IMPROVE_HOMING_RELIABILITY //#define SQUARE_WAVE_STEPPING //#define TMC_DEBUG //#define TMC_Z_CALIBRATION
define CALIBRATION_CURRENT 250
define CALIBRATION_EXTRA_HEIGHT 10
//#define TMC_SOFTWARE_DRIVER_ENABLE
define X_STEALTHCHOP false
define Y_STEALTHCHOP false
define Z_STEALTHCHOP false
define E0_STEALTHCHOP false
define E1_STEALTHCHOP false
define E2_STEALTHCHOP false
define E3_STEALTHCHOP false
define E4_STEALTHCHOP false
define E5_STEALTHCHOP false
define CHOPPER_DEFAULT_12V { 3, -1, 1 }
define CHOPPER_DEFAULT_19V { 4, 1, 1 }
define CHOPPER_DEFAULT_24V { 4, 2, 1 }
define CHOPPER_DEFAULT_36V { 5, 2, 4 }
define CHOPPER_PRUSAMK3_24V { 3, -2, 6 } // Imported parameters from the official Prusa firmware for MK3 (24V)
define CHOPPER_MK4DUO_436 { 5, 2, 3 } // Old defaults from MK4duo v4.3.6
define CHOPPER_TIMING CHOPPER_DEFAULT_12V
//#define MONITOR_DRIVER_STATUS //#define MONITOR_DRIVER_STATUS_INTERVAL_MS 500u //#define CURRENT_STEP_DOWN 50 // [mA] //#define REPORT_CURRENT_CHANGE //#define STOP_ON_ERROR //#define HYBRID_THRESHOLD
define X_HYBRID_THRESHOLD 100
define Y_HYBRID_THRESHOLD 100
define Z_HYBRID_THRESHOLD 2
define E0_HYBRID_THRESHOLD 30
define E1_HYBRID_THRESHOLD 30
define E2_HYBRID_THRESHOLD 30
define E3_HYBRID_THRESHOLD 30
define E4_HYBRID_THRESHOLD 30
define E5_HYBRID_THRESHOLD 30
define TMC_ADV() { }
//#define X_HARDWARE_SERIAL Serial1 //#define X2_HARDWARE_SERIAL Serial1 //#define Y_HARDWARE_SERIAL Serial1 //#define Y2_HARDWARE_SERIAL Serial1 //#define Z_HARDWARE_SERIAL Serial1 //#define Z2_HARDWARE_SERIAL Serial1 //#define Z3_HARDWARE_SERIAL Serial1 //#define E0_HARDWARE_SERIAL Serial1 //#define E1_HARDWARE_SERIAL Serial1 //#define E2_HARDWARE_SERIAL Serial1 //#define E3_HARDWARE_SERIAL Serial1 //#define E4_HARDWARE_SERIAL Serial1 //#define E5_HARDWARE_SERIAL Serial1
define X_SERIAL_TX_PIN NoPin
define X_SERIAL_RX_PIN NoPin
define X2_SERIAL_TX_PIN NoPin
define X2_SERIAL_RX_PIN NoPin
define Y_SERIAL_TX_PIN NoPin
define Y_SERIAL_RX_PIN NoPin
define Y2_SERIAL_TX_PIN NoPin
define Y2_SERIAL_RX_PIN NoPin
define Z_SERIAL_TX_PIN NoPin
define Z_SERIAL_RX_PIN NoPin
define Z2_SERIAL_TX_PIN NoPin
define Z2_SERIAL_RX_PIN NoPin
define Z3_SERIAL_TX_PIN NoPin
define Z3_SERIAL_RX_PIN NoPin
define E0_SERIAL_TX_PIN NoPin
define E0_SERIAL_RX_PIN NoPin
define E1_SERIAL_TX_PIN NoPin
define E1_SERIAL_RX_PIN NoPin
define E2_SERIAL_TX_PIN NoPin
define E2_SERIAL_RX_PIN NoPin
define E3_SERIAL_TX_PIN NoPin
define E3_SERIAL_RX_PIN NoPin
define E4_SERIAL_TX_PIN NoPin
define E4_SERIAL_RX_PIN NoPin
define E5_SERIAL_TX_PIN NoPin
define E5_SERIAL_RX_PIN NoPin
define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off
define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall
define X2_K_VAL 50
define X2_OVERCURRENT 2000
define X2_STALLCURRENT 1500
define Y_K_VAL 50
define Y_OVERCURRENT 2000
define Y_STALLCURRENT 1500
define Y2_K_VAL 50
define Y2_OVERCURRENT 2000
define Y2_STALLCURRENT 1500
define Z_K_VAL 50
define Z_OVERCURRENT 2000
define Z_STALLCURRENT 1500
define Z2_K_VAL 50
define Z2_OVERCURRENT 2000
define Z2_STALLCURRENT 1500
define Z3_K_VAL 50
define Z3_OVERCURRENT 2000
define Z3_STALLCURRENT 1500
define E0_K_VAL 50
define E0_OVERCURRENT 2000
define E0_STALLCURRENT 1500
define E1_K_VAL 50
define E1_OVERCURRENT 2000
define E1_STALLCURRENT 1500
define E2_K_VAL 50
define E2_OVERCURRENT 2000
define E2_STALLCURRENT 1500
define E3_K_VAL 50
define E3_OVERCURRENT 2000
define E3_STALLCURRENT 1500
define E4_K_VAL 50
define E4_OVERCURRENT 2000
define E4_STALLCURRENT 1500
define E5_K_VAL 50
define E5_OVERCURRENT 2000
define E5_STALLCURRENT 1500
/* Below you will find the configuration string, that created with Configurator tool online marlinkimbra.it ========== Start configuration string ========== { "processor": 1, "serial": -1, "baudrates": 115200, "serial2": -2, "baudrates2": 115200, "blockbuffersize": 32, "bufsize": 8, "txbuffersize": 32, "rxbuffersize": 1024, "serialxonxoff": "1", "customname": "none", "customconfig": "default config", "machineuuid": "00000000-0000-0000-0000-000000000000", "killMethod": 0, "notimeouts": 1000, "advancedok": "0", "emergencyparser": "0", "fastergcodeparser": "1", "fastergcodeexecute": "1", "hostkeepalive": "1", "hostkeepalivesecond": 2, "motherboards": "BOARD_ULTRATRONICS", "mechanism": 0, "power": 0, "defaultpower": "0", "delayafterpower": 5, "powertimeout": 30, "extruders": 2, "driverextruders": 2, "tempunitsupport": "0", "bed": "0", "chamber": "0", "cooler": "0", "nbed": 0, "nchamber": 0, "dhtsupport": "0", "tempsensor0": "1", "tempsensor1": "0", "tempsensor2": "0", "tempsensor3": "0", "tempsensor4": "0", "tempsensor5": "0", "tempsensorbed": "0", "tempsensorbed1": "0", "tempsensorbed2": "0", "tempsensorbed3": "0", "tempsensorchamber": "0", "tempsensorchamber1": "0", "tempsensorchamber2": "0", "tempsensorchamber3": "0", "tempsensorcooler": "0", "seriesrs": 4700, "t9name": "User sensor", "t9r25": 100000, "t9betak": 4036, "ad595offset": 0, "ad595gain": 1, "dummy998": 25, "dummy999": 100, "maxtemp0": 275, "maxtemp1": 275, "maxtemp2": 275, "maxtemp3": 275, "maxtemp4": 275, "maxtemp5": 275, "maxtempbed": 150, "maxtempchamber": 150, "maxtempcooler": 150, "mintemp0": 5, "mintemp1": 5, "mintemp2": 5, "mintemp3": 5, "mintemp4": 5, "mintemp5": 5, "mintempbed": 5, "mintempchamber": 5, "mintempcooler": 5, "maxconsecutivelowtemp": 2, "preheat1label": "PLA", "preheat1hotendtemp": 190, "preheat1bedtemp": 60, "preheat1chambertemp": 0, "preheat1fanspeed": 255, "preheat2label": "ABS", "preheat2hotendtemp": 240, "preheat2bedtemp": 100, "preheat2chambertemp": 50, "preheat2fanspeed": 255, "preheat3label": "GUM", "preheat3hotendtemp": 230, "preheat3bedtemp": 60, "preheat3chambertemp": 50, "preheat3fanspeed": 255, "autotemp": "0", "autotempoldweight": 0.98, "pidtemp": "1", "pidmax": 255, "piddrivemin": 40, "piddrivemax": 230, "pidfunctionalrange": 10, "pidautotunemenu": "1", "pidextrusionrate": "0", "lpqmaxlen": 50, "temphysteresis": 2, "tempinterval": 100, "pidkp0": 40, "pidki0": 7, "pidkd0": 60, "pidkc0": 100, "pidkp1": 40, "pidki1": 7, "pidkd1": 60, "pidkc1": 100, "pidkp2": 40, "pidki2": 7, "pidkd2": 60, "pidkc2": 100, "pidkp3": 40, "pidki3": 7, "pidkd3": 60, "pidkc3": 100, "pidkp4": 40, "pidki4": 7, "pidkd4": 60, "pidkc4": 100, "pidkp5": 40, "pidki5": 7, "pidkd5": 60, "pidkc5": 100, "pidbedtemp": "0", "pidbedmax": 255, "pidbeddrivemin": 40, "pidbeddrivemax": 230, "bedhysteresis": 2, "bedinterval": 500, "pidbedkp": 10, "pidbedki": 1, "pidbedkd": 300, "pidbedkp1": 10, "pidbedki1": 1, "pidbedkd1": 300, "pidbedkp2": 10, "pidbedki2": 1, "pidbedkd2": 300, "pidbedkp3": 10, "pidbedki3": 1, "pidbedkd3": 300, "pidchambertemp": "0", "pidchambermax": 255, "pidchamberdrivemin": 80, "pidchamberdrivemax": 255, "chamberhysteresis": 2, "chamberinterval": 500, "pidchamberkp": 10, "pidchamberki": 1, "pidchamberkd": 300, "pidchamberkp1": 10, "pidchamberki1": 1, "pidchamberkd1": 300, "pidchamberkp2": 10, "pidchamberki2": 1, "pidchamberkd2": 300, "pidchamberkp3": 10, "pidchamberki3": 1, "pidchamberkd3": 300, "pidcoolertemp": "0", "pidcoolermax": 255, "pidcoolerdrivemin": 80, "pidcoolerdrivemax": 255, "coolerhysteresis": 2, "coolerinterval": 500, "pidcoolerkp": 10, "pidcoolerki": 1, "pidcoolerkd": 305, "invertedheaterpins": "0", "invertedbedpin": "0", "invertedchamberpin": "0", "invertedcoolerpin": "0", "thermalprotectionhotend": "0", "thermalprotectionbed": "0", "thermalprotectionchamber": "0", "thermalprotectioncooler": "0", "adaptivefanspeed": "0", "thermalprotectionperiod": 40, "thermalprotectionhysteresis": 4, "watchtempperiod": 20, "watchtempincrease": 2, "watchbedtempperiod": 60, "watchbedtempincrease": 2, "watchchambertempperiod": 60, "watchchambertempincrease": 2, "watchcoolertempperiod": 60, "watchcoolertempincrease": 2, "uiprintername": "Generic", "endstopinterrupt": "0", "Xminendstop": "0", "Xmaxendstop": "0", "Yminendstop": "0", "Ymaxendstop": "0", "Zminendstop": "0", "Zmaxendstop": "0", "X2minendstop": "0", "X2maxendstop": "0", "Y2minendstop": "0", "Y2maxendstop": "0", "Z2minendstop": "0", "Z2maxendstop": "0", "Z3minendstop": "0", "Z3maxendstop": "0", "Zprobeendstop": "0", "Xhoming": 0, "Yhoming": 0, "Zhoming": 0, "Ehoming": 0, "Xinvertenable": 0, "Yinvertenable": 0, "Zinvertenable": 0, "Einvertenable": 0, "Xinvertstep": "0", "Yinvertstep": "0", "Zinvertstep": "0", "Einvertstep": "0", "Xinvertdir": "0", "Yinvertdir": "0", "Zinvertdir": "0", "E0invertdir": "0", "E1invertdir": "0", "E2invertdir": "0", "E3invertdir": "0", "E4invertdir": "0", "E5invertdir": "0", "disableX": "1", "disableY": "1", "disableZ": "1", "disableE": "1", "Xmaxpos": 200, "Xminpos": 0, "Ymaxpos": 200, "Yminpos": 0, "Zmaxpos": 200, "Zminpos": 0, "Zsafehoming": "0", "ZsafehomingX": 100, "ZsafehomingY": 100, "Zminheightbeforehoming": 0, "Zprobetype": "2", "Zprobesledoffset": 5, "Xprobeoffset": 0, "Yprobeoffset": 0, "Zprobeoffset": -1, "xyprobespeed": 8000, "zprobespeedfast": 1000, "zprobespeedslow": 500, "zprobingrepeat": "1", "Zproberepetitions": 1, "Zraiseprobedeploystow": 15, "Zraisebetweenprobe": 10, "Zraiseafterprobe": 0, "Zprobelowpoint": -5, "bltouch5vmode": "0", "lcdbedlevel": "0", "lcdzstep": 0.025, "lcdprobezrange": 4, "levelingfadeheight": "0", "bedlevel": 0, "meshinset": 10, "meshg28rest": "0", "maxgridpointX": 3, "maxgridpointY": 3, "manualhomepos": "0", "bedcenter00": "0", "Xhomepos": 0, "Yhomepos": 0, "Zhomepos": 0, "Xstepspermm": 80, "Ystepspermm": 80, "Zstepspermm": 4000, "E0stepspermm": 625, "E1stepspermm": 625, "E2stepspermm": 625, "E3stepspermm": 625, "E4stepspermm": 625, "E5stepspermm": 625, "Xmaxspeed": 300, "Ymaxspeed": 300, "Zmaxspeed": 2, "E0maxspeed": 100, "E1maxspeed": 100, "E2maxspeed": 100, "E3maxspeed": 100, "E4maxspeed": 100, "E5maxspeed": 100, "Xmanualspeed": 100, "Ymanualspeed": 100, "Zmanualspeed": 2, "Emanualspeed": 10, "minimumspeed": 0, "minimumtravelspeed": 0, "minimumplannerspeed": 0.05, "Xmaxacceleration": 3000, "Ymaxacceleration": 3000, "Zmaxacceleration": 50, "E0maxacceleration": 3000, "E1maxacceleration": 3000, "E2maxacceleration": 3000, "E3maxacceleration": 3000, "E4maxacceleration": 3000, "E5maxacceleration": 3000, "E0retractacceleration": 10000, "E1retractacceleration": 10000, "E2retractacceleration": 10000, "E3retractacceleration": 10000, "E4retractacceleration": 10000, "E5retractacceleration": 10000, "defaultacceleration": 3000, "defaulttravelacceleration": 3000, "maxXjerk": 10, "maxYjerk": 10, "maxZjerk": 0.4, "maxE0jerk": 5, "maxE1jerk": 5, "maxE2jerk": 5, "maxE3jerk": 5, "maxE4jerk": 5, "maxE5jerk": 5, "Xhomingspeed": 100, "Yhomingspeed": 100, "Zhomingspeed": 2, "XbumpMM": 5, "YbumpMM": 5, "ZbumpMM": 2, "Xbumpdivisor": 5, "Ybumpdivisor": 5, "Zbumpdivisor": 2, "hotendoffsetXE1": 0, "hotendoffsetXE2": 0, "hotendoffsetXE3": 0, "hotendoffsetYE1": 0, "hotendoffsetYE2": 0, "hotendoffsetYE3": 0, "hotendoffsetZE1": 0, "hotendoffsetZE2": 0, "hotendoffsetZE3": 0, "hysteresis": "0", "hysteresisXmm": 0, "hysteresisYmm": 0, "hysteresisZmm": 0, "hysteresiscorrection": 1, "deltasegmentpersecond": 200, "deltasegmentperline": 20, "deltadiagonalrod": 220, "deltasmoothrodoffset": 145, "deltaeffectoroffset": 20, "deltacarriageoffset": 20, "deltaprinterradius": 70, "deltaheight": 210, "towerAendstop": 0, "towerBendstop": 0, "towerCendstop": 0, "towerAangle": 0, "towerBangle": 0, "towerCangle": 0, "towerAradius": 0, "towerBradius": 0, "towerCradius": 0, "towerAdiagonalrod": 0, "towerBdiagonalrod": 0, "towerCdiagonalrod": 0, "deltaautoprecision": 0.1, "deltaautogrid": 7, "deltaXdeploystart": 0, "deltaYdeploystart": 0, "deltaZdeploystart": 30, "deltaXdeployend": 0, "deltaYdeployend": 0, "deltaZdeployend": 30, "deltaXretractstart": 0, "deltaYretractstart": 0, "deltaZretractstart": 30, "deltaXretractend": 0, "deltaYretractend": 0, "deltaZretractend": 0, "deltaautocalibration": 0, "deltahomesafezone": "1", "deltahomeonpower": "0", "lcdlanguages": "en", "displays": 14, "encoderpulsesstep": 5, "encoderstepmenu": 1, "invertclickbutton": "0", "invertbackbutton": "0", "invertrotaryswitch": "0", "invertmenudirection": "0", "lcdspeaker": "1", "nextion_model": 8, "nextion_port": 1, "nextionGFX": "0", "lcdprogressbar": 0, "lcdprogressbarbartime": 3, "lcdprogressbarmsgtime": 1, "lcdprogressbarmsgexpire": 0, "doublequadstepping": "1", "junctiondeviation": "0", "junctiondeviationfactor": 0.02, "bezierjerk": "0", "stepperpulse": 0, "stepperrate": 500000, "directiondelay": 0, "stepsmoothing": "0", "Xtwostepper": "0", "X2vsXdir": "0", "Xtwoendstop": "0", "Ytwostepper": "0", "Y2vsYdir": "0", "Ytwoendstop": "0", "Ztwostepper": "0", "Z2vsZdir": "0", "Ztwoendstop": "0", "Zthreestepper": "0", "Z3vsZdir": "0", "Zthreeendstop": "0", "extencoder": "0", "extencodererrorstep": 500, "extencoderminstep": 10, "Xmicrostep": 16, "Ymicrostep": 16, "Zmicrostep": 16, "E0microstep": 16, "E1microstep": 16, "E2microstep": 16, "E3microstep": 16, "E4microstep": 16, "E5microstep": 16, "Xcurrent": 800, "Ycurrent": 800, "Zcurrent": 800, "E0current": 800, "E1current": 800, "E2current": 800, "E3current": 800, "E4current": 800, "E5current": 800, "Xdrivertype": "DRV8825", "Ydrivertype": "DRV8825", "Zdrivertype": "DRV8825", "X2drivertype": "A4988", "Y2drivertype": "A4988", "Z2drivertype": "A4988", "Z3drivertype": "A4988", "E0drivertype": "DRV8825", "E1drivertype": "DRV8825", "E2drivertype": "A4988", "E3drivertype": "A4988", "E4drivertype": "A4988", "E5drivertype": "A4988", "softpwmspeed": 0, "fanminpwm": 0, "fanmaxpwm": 255, "fanpwmfreq": 250, "fankickstarttime": 0, "autofan0": -1, "autofan1": 0, "autofan2": -1, "autofan3": -1, "autofan4": -1, "autofan5": -1, "Ecoolertemp": 50, "Ecoolerspeed": 255, "Ecoolerminspeed": 0, "controllerfansec": 60, "controllerfanspeed": 255, "controllerfanminspeed": 0, "toolzraise": 1, "toolpark": "0", "toolnoreturn": "0", "toolfilamentswap": "0", "toolfilamentlenght": 20, "toolfilamentpurge": 2, "toolfilamentspeed": 3000, "toolfilamentprimespeed": 600, "defaultfilamentdia": 1.75, "dangerousextrude": "1", "extrudemintemp": 170, "lengthextrude": "1", "extrudemaxlenght": 400, "singlenozzle": "0", "baricuda": "0", "colormixingextruder": "0", "mixingsteppers": "2", "virtualtools": 16, "mkr4": "0", "invertrelepin": "0", "E0E1pin": -1, "E0E2pin": -1, "E1E3pin": -1, "mkr6": "0", "mkr12": "0", "EX1pin": -1, "EX2pin": -1, "mmu2": "0", "mmu2serial": 1, "mmu2mode12": "0", "mmu2rstpin": -1, "dondolo": "0", "dondolodualmotor": "0", "dondoloservo": 0, "dondoloservoe0": 120, "dondoloservoe1": 10, "dondolodelay": 1000, "workspace": "0", "softwareminendstop": "1", "softwaremaxendstop": "1", "endstoponlyforhome": "1", "abortendstophit": "0", "servos": "1", "numservos": 0, "Zservo": -1, "angleextendservosZ": 0, "angleretractservosZ": 0, "servodeactivate": "0", "servodeactivatedelay": 300, "quickhome": "0", "homeYbeforeX": "1", "homeXYbeforeZ": "0", "babystepping": "0", "babysteppingXY": "0", "babysteppingZprobe": "0", "babysteppingdoubleclick": "0", "filamentsensor": "0", "filamentsensorextruder": 0, "filamentsensormaxdia": 2, "filamentsensormindia": 1.35, "filamentsensordia": 1.75, "filamentsensorlcd": "0", "filamentrunout": "0", "filamentrunoutdav": "0", "filamentrunoutdistance": 0, "filamentrunoutscript": "M600", "filamentsensor0": "0", "filamentsensor1": "0", "filamentsensor2": "0", "filamentsensor3": "0", "filamentsensor4": "0", "filamentsensor5": "0", "powerconsumption": "0", "dooropen": "0", "doorendstop": "0", "powercheck": "0", "powercheckendstop": "0", "caselight": "0", "caselightinvert": "0", "caselightdefault": "0", "caselightbrightness": 255, "eeprom": "1", "eepromsd": "2", "eepromchitchat": "1", "sdsupport": 0, "sdspeed": 1, "sddisableddetect": "0", "sddetectinverted": "0", "sdrestart": "0", "sdrestarttime": 1, "laserbeam": "0", "lasercontrol": 1, "laserfocus": "0", "laserraster": "0", "rfidmodule": "0", "rfidserial": 1, "rgbled": "0", "rgbwled": "0", "pca9632": "0", "neopixelled": "0", "neopixeltype": "NEO_GRB", "neopixelpixels": 16, "eventled": "0", "jsonoutput": "0", "testmode": "0", "inchmodesupport": "0", "nozzlecleanfeature": "0", "nozzlecleanstrokes": 12, "nozzlecleantriangle": 3, "nozzlecleanstart_x": 30, "nozzlecleanstart_y": 30, "nozzlecleanstart_z": 1, "nozzlecleanend_x": 100, "nozzlecleanend_y": 60, "nozzlecleanend_z": 1, "nozzlecleangoback": "1", "nozzleparkfeature": "0", "nozzleparkXpos": 10, "nozzleparkYpos": 10, "nozzleparkZpos": 20, "nozzleparkXYfr": 100, "nozzleparkZfr": 5, "filamentchangeenable": "0", "filamentchangeretract": 5, "filamentchangeretractfr": 20, "filamentchangeunload": 100, "filamentchangeunloadfr": 50, "filamentchangeslowload": 5, "filamentchangeslowloadfr": 6, "filamentchangefastload": 100, "filamentchangefastloadfr": 50, "filamentchangeextrude": 50, "filamentchangeextrudefr": 5, "filamentchangeunloadretract": 10, "filamentchangeunloadretractdelay": 5000, "filamentchangeunloadretractpurge": 8, "filamentchangenozzletimeout": 45, "filamentchangeprinteroff": 5, "filamentchangenumberbeep": 5, "filamentchangenosteppertimeout": "1", "filamentchangeparkheadonpause": "0", "filamentchangehomebefore": "0", "filamentchangegcodes": "0", "filamentchangeallextruder": "0", "Xmotor": { "name": "X motor", "step": "ORIG_X_STEP_PIN", "dir": "ORIG_X_DIR_PIN", "enable": "ORIG_X_ENABLE_PIN" }, "Ymotor": { "name": "Y motor", "step": "ORIG_Y_STEP_PIN", "dir": "ORIG_Y_DIR_PIN", "enable": "ORIG_Y_ENABLE_PIN" }, "Zmotor": { "name": "Z motor", "step": "ORIG_Z_STEP_PIN", "dir": "ORIG_Z_DIR_PIN", "enable": "ORIG_Z_ENABLE_PIN" }, "X2motor": { "name": "Extruder 1", "step": "ORIG_E1_STEP_PIN", "dir": "ORIG_E1_DIR_PIN", "enable": "ORIG_E1_ENABLE_PIN" }, "Y2motor": { "name": "Extruder 1", "step": "ORIG_E1_STEP_PIN", "dir": "ORIG_E1_DIR_PIN", "enable": "ORIG_E1_ENABLE_PIN" }, "Z2motor": { "name": "Extruder 1", "step": "ORIG_E1_STEP_PIN", "dir": "ORIG_E1_DIR_PIN", "enable": "ORIG_E1_ENABLE_PIN" }, "Z3motor": { "name": "Extruder 2", "step": "ORIG_E2_STEP_PIN", "dir": "ORIG_E2_DIR_PIN", "enable": "ORIG_E2_ENABLE_PIN" }, "E0motor": { "name": "Extruder 0", "step": "ORIG_E0_STEP_PIN", "dir": "ORIG_E0_DIR_PIN", "enable": "ORIG_E0_ENABLE_PIN" }, "E1motor": { "name": "Extruder 1", "step": "ORIG_E1_STEP_PIN", "dir": "ORIG_E1_DIR_PIN", "enable": "ORIG_E1_ENABLE_PIN" }, "E2motor": { "name": "Extruder 2", "step": "ORIG_E2_STEP_PIN", "dir": "ORIG_E2_DIR_PIN", "enable": "ORIG_E2_ENABLE_PIN" }, "E3motor": { "name": "Extruder 3", "step": "ORIG_E3_STEP_PIN", "dir": "ORIG_E3_DIR_PIN", "enable": "ORIG_E3_ENABLE_PIN" }, "E4motor": { "name": "Extruder 4", "step": "ORIG_E4_STEP_PIN", "dir": "ORIG_E4_DIR_PIN", "enable": "ORIG_E4_ENABLE_PIN" }, "E5motor": { "name": "Extruder 5", "step": "ORIG_E5_STEP_PIN", "dir": "ORIG_E5_DIR_PIN", "enable": "ORIG_E5_ENABLE_PIN" }, "heater0pin": "ORIG_HEATER_HE0_PIN", "heater1pin": "ORIG_HEATER_HE1_PIN", "heater2pin": "ORIG_HEATER_HE2_PIN", "heater3pin": "ORIG_HEATER_HE3_PIN", "heater4pin": "ORIG_HEATER_HE4_PIN", "heater5pin": "ORIG_HEATER_HE5_PIN", "heaterbedpin": "ORIG_HEATER_BED0_PIN", "heaterbed1pin": "ORIG_HEATER_BED1_PIN", "heaterbed2pin": "ORIG_HEATER_BED2_PIN", "heaterbed3pin": "ORIG_HEATER_BED3_PIN", "heaterchamberpin": "NoPin", "heaterchamber1pin": "NoPin", "heaterchamber2pin": "NoPin", "heaterchamber3pin": "NoPin", "heatercoolerpin": "NoPin", "temp0pin": "ORIG_TEMP_HE0_PIN", "temp1pin": "ORIG_TEMP_HE1_PIN", "temp2pin": "ORIG_TEMP_HE2_PIN", "temp3pin": "ORIG_TEMP_HE3_PIN", "temp4pin": "ORIG_TEMP_HE4_PIN", "temp5pin": "ORIG_TEMP_HE5_PIN", "tempbedpin": "ORIG_TEMP_BED0_PIN", "tempbed1pin": "ORIG_TEMP_BED1_PIN", "tempbed2pin": "ORIG_TEMP_BED2_PIN", "tempbed3pin": "ORIG_TEMP_BED3_PIN", "tempchamberpin": "NoPin", "tempchamber1pin": "NoPin", "tempchamber2pin": "NoPin", "tempchamber3pin": "NoPin", "tempcoolerpin": "NoPin", "Xminpin": "ORIG_X_MIN_PIN", "Xmaxpin": "ORIG_X_MAX_PIN", "Yminpin": "ORIG_Y_MIN_PIN", "Ymaxpin": "ORIG_Y_MAX_PIN", "Zminpin": "ORIG_Z_MIN_PIN", "Zmaxpin": "ORIG_Z_MAX_PIN", "X2minpin": "NoPin", "X2maxpin": "NoPin", "Y2minpin": "NoPin", "Y2maxpin": "NoPin", "Z2minpin": "NoPin", "Z3minpin": "NoPin", "Z2maxpin": "NoPin", "Z3maxpin": "NoPin", "Zprobepin": "NoPin", "Xcspin": "ORIG_X_CS_PIN", "Ycspin": "ORIG_Y_CS_PIN", "Zcspin": "ORIG_Z_CS_PIN", "X2cspin": "ORIG_E1_CS_PIN", "Y2cspin": "ORIG_E1_CS_PIN", "Z2cspin": "ORIG_E1_CS_PIN", "Z3cspin": "ORIG_E2_CS_PIN", "E0cspin": "ORIG_E0_CS_PIN", "E1cspin": "ORIG_E1_CS_PIN", "E2cspin": "ORIG_E2_CS_PIN", "E3cspin": "ORIG_E3_CS_PIN", "E4cspin": "ORIG_E4_CS_PIN", "E5cspin": "ORIG_E5_CS_PIN", "fanpin": "ORIG_FAN0_PIN", "fan1pin": "ORIG_FAN1_PIN", "fan2pin": "ORIG_FAN2_PIN", "fan3pin": "ORIG_FAN3_PIN", "fan4pin": "ORIG_FAN4_PIN", "fan5pin": "ORIG_FAN5_PIN", "PSONpin": "ORIG_PS_ON_PIN", "beeperpin": "ORIG_BEEPER_PIN", "filamentsensorpin": "NoPin", "filrunoutdavpin": "NoPin", "filrunoutpin0": "NoPin", "filrunoutpin1": "NoPin", "filrunoutpin2": "NoPin", "filrunoutpin3": "NoPin", "filrunoutpin4": "NoPin", "filrunoutpin5": "NoPin", "laserpwrpin": "ORIG_LASER_PWR_PIN", "laserpwmpin": "ORIG_LASER_PWM_PIN", "laserperipheralspin": "NoPin", "laserperipheralsstatuspin": "NoPin", "cncrouterpin": "NoPin", "powerconsumptionpin": "NoPin", "doorpin": "NoPin", "powercheckpin": "NoPin", "caselightpin": "NoPin", "rgbledRpin": "NoPin", "rgbledGpin": "NoPin", "rgbledBpin": "NoPin", "rgbledWpin": "NoPin", "neopixelpin": "NoPin", "dhtdatapin": "NoPin", "tacho0pin": "NoPin", "tacho1pin": "NoPin", "tacho2pin": "NoPin", "tacho3pin": "NoPin", "tacho4pin": "NoPin", "tacho5pin": "NoPin", "END_DATA": 0 } ========== End configuration string ========== */
/**
*/
pragma once
/**
*/
//=================================== BASIC ==================================
// X axis pins
define X_STEP_PIN ORIG_X_STEP_PIN
define X_DIR_PIN ORIG_X_DIR_PIN
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
define X_CS_PIN ORIG_X_CS_PIN
// X2 axis pins
if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_TWO_STEPPER_DRIVERS)
define X2_STEP_PIN ORIG_E1_STEP_PIN
define X2_DIR_PIN ORIG_E1_DIR_PIN
define X2_ENABLE_PIN ORIG_E1_ENABLE_PIN
define X2_CS_PIN ORIG_E1_CS_PIN
endif
// Y axis pins
define Y_STEP_PIN ORIG_Y_STEP_PIN
define Y_DIR_PIN ORIG_Y_DIR_PIN
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
define Y_CS_PIN ORIG_Y_CS_PIN
// Y2 axis pins
if ENABLED(Y_TWO_STEPPER_DRIVERS)
define Y2_STEP_PIN ORIG_E1_STEP_PIN
define Y2_DIR_PIN ORIG_E1_DIR_PIN
define Y2_ENABLE_PIN ORIG_E1_ENABLE_PIN
define Y2_CS_PIN ORIG_E1_CS_PIN
endif
// Z axis pins
define Z_STEP_PIN ORIG_Z_STEP_PIN
define Z_DIR_PIN ORIG_Z_DIR_PIN
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
define Z_CS_PIN ORIG_Z_CS_PIN
// Z2 axis pins
if (ENABLED(Z_TWO_STEPPER_DRIVERS) || ENABLED(Z_THREE_STEPPER_DRIVERS))
define Z2_STEP_PIN ORIG_E1_STEP_PIN
define Z2_DIR_PIN ORIG_E1_DIR_PIN
define Z2_ENABLE_PIN ORIG_E1_ENABLE_PIN
define Z2_CS_PIN ORIG_E1_CS_PIN
endif
// Z3 axis pins
if ENABLED(Z_THREE_STEPPER_DRIVERS)
define Z3_STEP_PIN ORIG_E2_STEP_PIN
define Z3_DIR_PIN ORIG_E2_DIR_PIN
define Z3_ENABLE_PIN ORIG_E2_ENABLE_PIN
define Z3_CS_PIN ORIG_E2_CS_PIN
endif
// E0 axis pins
define E0_STEP_PIN ORIG_E0_STEP_PIN
define E0_DIR_PIN ORIG_E0_DIR_PIN
define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
define E0_CS_PIN ORIG_E0_CS_PIN
define SOL0_PIN ORIG_SOL0_PIN
// E1 axis pins
define E1_STEP_PIN ORIG_E1_STEP_PIN
define E1_DIR_PIN ORIG_E1_DIR_PIN
define E1_ENABLE_PIN ORIG_E1_ENABLE_PIN
define E1_CS_PIN ORIG_E1_CS_PIN
define SOL1_PIN ORIG_SOL1_PIN
// E2 axis pins
define E2_STEP_PIN ORIG_E2_STEP_PIN
define E2_DIR_PIN ORIG_E2_DIR_PIN
define E2_ENABLE_PIN ORIG_E2_ENABLE_PIN
define E2_CS_PIN ORIG_E2_CS_PIN
define SOL2_PIN ORIG_SOL2_PIN
// E3 axis pins
define E3_STEP_PIN ORIG_E3_STEP_PIN
define E3_DIR_PIN ORIG_E3_DIR_PIN
define E3_ENABLE_PIN ORIG_E3_ENABLE_PIN
define E3_CS_PIN ORIG_E3_CS_PIN
define SOL3_PIN ORIG_SOL3_PIN
// E4 axis pins
define E4_STEP_PIN ORIG_E4_STEP_PIN
define E4_DIR_PIN ORIG_E4_DIR_PIN
define E4_ENABLE_PIN ORIG_E4_ENABLE_PIN
define E4_CS_PIN ORIG_E4_CS_PIN
define SOL4_PIN ORIG_SOL4_PIN
// E5 axis pins
define E5_STEP_PIN ORIG_E5_STEP_PIN
define E5_DIR_PIN ORIG_E5_DIR_PIN
define E5_ENABLE_PIN ORIG_E5_ENABLE_PIN
define E5_CS_PIN ORIG_E5_CS_PIN
define SOL5_PIN ORIG_SOL5_PIN
// ENDSTOP pins
define X_MIN_PIN ORIG_X_MIN_PIN
define X_MAX_PIN ORIG_X_MAX_PIN
define Y_MIN_PIN ORIG_Y_MIN_PIN
define Y_MAX_PIN ORIG_Y_MAX_PIN
define Z_MIN_PIN ORIG_Z_MIN_PIN
define Z_MAX_PIN ORIG_Z_MAX_PIN
define X2_MIN_PIN NoPin
define Y2_MIN_PIN NoPin
define Z2_MIN_PIN NoPin
define Z3_MIN_PIN NoPin
define X2_MAX_PIN NoPin
define Y2_MAX_PIN NoPin
define Z2_MAX_PIN NoPin
define Z3_MAX_PIN NoPin
define Z_PROBE_PIN NoPin
// HEATERS pins
define HEATER_HE0_PIN ORIG_HEATER_HE0_PIN
define HEATER_HE1_PIN ORIG_HEATER_HE1_PIN
define HEATER_HE2_PIN ORIG_HEATER_HE2_PIN
define HEATER_HE3_PIN ORIG_HEATER_HE3_PIN
define HEATER_HE4_PIN ORIG_HEATER_HE4_PIN
define HEATER_HE5_PIN ORIG_HEATER_HE5_PIN
define HEATER_BED0_PIN ORIG_HEATER_BED0_PIN
define HEATER_BED1_PIN ORIG_HEATER_BED1_PIN
define HEATER_BED2_PIN ORIG_HEATER_BED2_PIN
define HEATER_BED3_PIN ORIG_HEATER_BED3_PIN
define HEATER_CHAMBER0_PIN NoPin
define HEATER_CHAMBER1_PIN NoPin
define HEATER_CHAMBER2_PIN NoPin
define HEATER_CHAMBER3_PIN NoPin
define HEATER_COOLER_PIN NoPin
// TEMP pins
define TEMP_HE0_PIN ORIG_TEMP_HE0_PIN
define TEMP_HE1_PIN ORIG_TEMP_HE1_PIN
define TEMP_HE2_PIN ORIG_TEMP_HE2_PIN
define TEMP_HE3_PIN ORIG_TEMP_HE3_PIN
define TEMP_HE4_PIN ORIG_TEMP_HE4_PIN
define TEMP_HE5_PIN ORIG_TEMP_HE5_PIN
define TEMP_BED0_PIN ORIG_TEMP_BED0_PIN
define TEMP_BED1_PIN ORIG_TEMP_BED1_PIN
define TEMP_BED2_PIN ORIG_TEMP_BED2_PIN
define TEMP_BED3_PIN ORIG_TEMP_BED3_PIN
define TEMP_CHAMBER0_PIN NoPin
define TEMP_CHAMBER1_PIN NoPin
define TEMP_CHAMBER2_PIN NoPin
define TEMP_CHAMBER3_PIN NoPin
define TEMP_COOLER_PIN NoPin
// FAN pins
define FAN0_PIN ORIG_FAN0_PIN
define FAN1_PIN ORIG_FAN1_PIN
define FAN2_PIN ORIG_FAN2_PIN
define FAN3_PIN ORIG_FAN3_PIN
define FAN4_PIN ORIG_FAN4_PIN
define FAN5_PIN ORIG_FAN5_PIN
// PS ON pin
define PS_ON_PIN ORIG_PS_ON_PIN
// BEEPER pin
define BEEPER_PIN ORIG_BEEPER_PIN
//============================================================================
//================================= FEATURE ==================================
if ENABLED(TACHOMETRIC)
define TACHO0_PIN NoPin
define TACHO1_PIN NoPin
define TACHO2_PIN NoPin
define TACHO3_PIN NoPin
define TACHO4_PIN NoPin
define TACHO5_PIN NoPin
endif
if ENABLED(MKR4)
define E0E1_CHOICE_PIN -1
define E0E2_CHOICE_PIN -1
define E1E3_CHOICE_PIN -1
elif ENABLED(MKR6) || ENABLED(MKR12)
define EX1_CHOICE_PIN -1
define EX2_CHOICE_PIN -1
endif
if ENABLED(PRUSA_MMU2)
define MMU2_RST_PIN -1
endif
if ENABLED(LASER)
define LASER_PWR_PIN ORIG_LASER_PWR_PIN
define LASER_PWM_PIN ORIG_LASER_PWM_PIN
if ENABLED(LASER_PERIPHERALS)
endif
endif
if ENABLED(CNCROUTER)
define CNCROUTER_PIN NoPin
endif
if ENABLED(FILAMENT_RUNOUT_SENSOR)
define FIL_RUNOUT_0_PIN NoPin
define FIL_RUNOUT_1_PIN NoPin
define FIL_RUNOUT_2_PIN NoPin
define FIL_RUNOUT_3_PIN NoPin
define FIL_RUNOUT_4_PIN NoPin
define FIL_RUNOUT_5_PIN NoPin
define FIL_RUNOUT_DAV_PIN NoPin
endif
if ENABLED(FILAMENT_WIDTH_SENSOR)
define FILWIDTH_PIN NoPin
endif
if ENABLED(FLOWMETER_SENSOR)
define FLOWMETER_PIN
endif
if ENABLED(POWER_CONSUMPTION)
define POWER_CONSUMPTION_PIN NoPin
endif
if ENABLED(PHOTO_GCODE)
define PHOTOGRAPH_PIN NoPin
define CHDK_PIN NoPin
endif
if ENABLED(CASE_LIGHT)
define CASE_LIGHT_PIN NoPin
endif
if ENABLED(DOOR_OPEN_FEATURE)
define DOOR_OPEN_PIN NoPin
endif
if ENABLED(POWER_CHECK)
define POWER_CHECK_PIN NoPin
endif
if ENABLED(Z_PROBE_SLED)
define SLED_PIN NoPin
endif
if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
define RGB_LED_R_PIN NoPin
define RGB_LED_G_PIN NoPin
define RGB_LED_B_PIN NoPin
define RGB_LED_W_PIN NoPin
endif
if ENABLED(NEOPIXEL_LED)
define NEOPIXEL_PIN NoPin
endif
if ENABLED(DHT_SENSOR)
define DHT_DATA_PIN NoPin
endif
if HAS_TRINAMIC && ENABLED(TMC_USE_SW_SPI)
define TMC_SW_MOSI 51
define TMC_SW_MISO 50
define TMC_SW_SCK 52
endif
//============================================================================
Have you configured MK4duo manually? No. No changes, stock firmware as downloaded from configurator