Please, follow this template when opening a new issue: this will help us a lot in the process of helping you.

Issue description

1) Menu Items Truncated (See Pictures) - Only "STATIC" ITEM Menus are truncated / shortened to 3 characters, "EDIT"items appear normally.

LCD1 LCD2

2) SD Card is only read when Board is reset. Otherwise, ejecting card shows "Card Removed", inserting card shows "Card Inserted" with "No Media" messages in menu. Running M21 from Repetier host shows SD.Init Fail.

If I press the Ultratronics reset button, I am able to view the print from SD menu.

Firmware version

MK4duo 4.4.0

/**

MK4duo Firmware for 3D Printer, Laser and CNC
Based on Marlin, Sprinter and grbl
Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
Copyright (c) 2019 Alberto Cotronei @MagoKimbra
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see http://www.gnu.org/licenses/. */

/**

Configuration_Overall.h
Here you can define all your custom settings and they will overwrite configurations in the main configuration files. */

/***

Firmware Version V4.4.0 * ***/

define CONFIGURATION_OVERALL

/***

Configuration_Basic * ***/
define SERIAL_PORT_1 0

define BAUDRATE_1 250000

define SERIAL_PORT_2 -2

define BAUDRATE_2 250000

define BLOCK_BUFFER_SIZE 32

define MAX_CMD_SIZE 96

define BUFSIZE 8

define TX_BUFFER_SIZE 32

define RX_BUFFER_SIZE 1024

define SERIAL_XON_XOFF

//#define SERIAL_STATS_MAX_RX_QUEUED //#define SERIAL_STATS_DROPPED_RX

define STRING_CONFIG_AUTHOR "(none, default config)"

define MACHINE_UUID "00000000-0000-0000-0000-000000000000"

define KILL_METHOD 0

define NO_TIMEOUTS 1000

//#define ADVANCED_OK //#define EMERGENCY_PARSER

define FASTER_GCODE_PARSER

define FASTER_GCODE_EXECUTE

define HOST_KEEPALIVE_FEATURE

define DEFAULT_KEEPALIVE_INTERVAL 2

define MOTHERBOARD BOARD_ULTRATRONICS

define MECHANISM MECH_CARTESIAN

define POWER_SUPPLY 0

//#define POWER_NAME "Generic"

define PS_DEFAULT_OFF false

define DELAY_AFTER_POWER_ON 5

define POWER_TIMEOUT 30

define EXTRUDERS 2

define DRIVER_EXTRUDERS 2

/*****

Configuration_Temperature * *****/ //#define TEMPERATURE_UNITS_SUPPORT
define TEMP_SENSOR_HE0 1

define TEMP_SENSOR_HE1 1

define TEMP_SENSOR_HE2 0

define TEMP_SENSOR_HE3 0

define TEMP_SENSOR_HE4 0

define TEMP_SENSOR_HE5 0

define TEMP_SENSOR_BED0 0

define TEMP_SENSOR_BED1 0

define TEMP_SENSOR_BED2 0

define TEMP_SENSOR_BED3 0

define TEMP_SENSOR_CHAMBER0 0

define TEMP_SENSOR_CHAMBER1 0

define TEMP_SENSOR_CHAMBER2 0

define TEMP_SENSOR_CHAMBER3 0

define TEMP_SENSOR_COOLER 0

define THERMISTOR_SERIES_RS 4700

define T9_NAME "User sensor"

define T9_R25 100000

define T9_BETA 4036

//#define DHT_SENSOR

define DHT_TYPE 11

define TEMP_SENSOR_AD595_OFFSET 0

define TEMP_SENSOR_AD595_GAIN 1

define DUMMY_THERMISTOR_998_VALUE 25

define DUMMY_THERMISTOR_999_VALUE 100

define TEMP_RESIDENCY_TIME 10 // (seconds)

define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.

define HOTEND_0_MAXTEMP 275

define HOTEND_1_MAXTEMP 275

define HOTEND_2_MAXTEMP 275

define HOTEND_3_MAXTEMP 275

define HOTEND_4_MAXTEMP 275

define HOTEND_5_MAXTEMP 275

define BED_MAXTEMP 150

define CHAMBER_MAXTEMP 150

define COOLER_MAXTEMP 150

define HOTEND_0_MINTEMP 5

define HOTEND_1_MINTEMP 5

define HOTEND_2_MINTEMP 5

define HOTEND_3_MINTEMP 5

define HOTEND_4_MINTEMP 5

define HOTEND_5_MINTEMP 5

define BED_MINTEMP 5

define CHAMBER_MINTEMP 5

define COOLER_MINTEMP 5

define MAX_CONSECUTIVE_LOW_TEMP 2

define PREHEAT_1_LABEL "PLA"

define PREHEAT_1_TEMP_HOTEND 190

define PREHEAT_1_TEMP_BED 60

define PREHEAT_1_TEMP_CHAMBER 0

define PREHEAT_1_FAN_SPEED 255

define PREHEAT_2_LABEL "ABS"

define PREHEAT_2_TEMP_HOTEND 240

define PREHEAT_2_TEMP_BED 100

define PREHEAT_2_TEMP_CHAMBER 50

define PREHEAT_2_FAN_SPEED 255

define PREHEAT_3_LABEL "GUM"

define PREHEAT_3_TEMP_HOTEND 230

define PREHEAT_3_TEMP_BED 60

define PREHEAT_3_TEMP_CHAMBER 50

define PREHEAT_3_FAN_SPEED 255

//#define AUTOTEMP

define AUTOTEMP_OLDWEIGHT 0.98

//#define TEMP_STAT_LEDS

define HOTEND_PWM_FREQUENCY 250

define BED_PWM_FREQUENCY 100

define CHAMBER_PWM_FREQUENCY 100

define COOLER_PWM_FREQUENCY 100

define PIDTEMP true

define POWER_MAX 255

define POWER_DRIVE_MIN 40

define POWER_DRIVE_MAX 230

define HOTEND_HYSTERESIS 2

define HOTEND_CHECK_INTERVAL 100

define PID_FUNCTIONAL_RANGE 10

define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.

//#define PID_ADD_EXTRUSION_RATE

define LPQ_MAX_LEN 50

define HOTEND_Kp {40,40,40,40,40,40}

define HOTEND_Ki {7,7,7,7,7,7}

define HOTEND_Kd {60,60,60,60,60,60}

define HOTEND_Kc {100,100,100,100,100,100}

define PIDTEMPBED false

define BED_POWER_MAX 255

define BED_POWER_DRIVE_MIN 40

define BED_POWER_DRIVE_MAX 230

define BED_HYSTERESIS 2

define BED_CHECK_INTERVAL 500

define BED_Kp {10,10,10,10}

define BED_Ki {1,1,1,1}

define BED_Kd {300,300,300,300}

define PIDTEMPCHAMBER false

define CHAMBER_POWER_MAX 255

define CHAMBER_POWER_DRIVE_MIN 80

define CHAMBER_POWER_DRIVE_MAX 255

define CHAMBER_HYSTERESIS 2

define CHAMBER_CHECK_INTERVAL 500

define CHAMBER_Kp {10,10,10,10}

define CHAMBER_Ki {1,1,1,1}

define CHAMBER_Kd {300,300,300,300}

define PIDTEMPCOOLER false

define COOLER_POWER_MAX 255

define COOLER_POWER_DRIVE_MIN 80

define COOLER_POWER_DRIVE_MAX 255

define COOLER_HYSTERESIS 2

define COOLER_CHECK_INTERVAL 500

define COOLER_Kp 10

define COOLER_Ki 1

define COOLER_Kd 305

define INVERTED_HEATER_PINS false

define INVERTED_BED_PIN false

define INVERTED_CHAMBER_PIN false

define INVERTED_COOLER_PIN false

define THERMAL_PROTECTION_HOTENDS false

define THERMAL_PROTECTION_BED false

define THERMAL_PROTECTION_CHAMBER false

define THERMAL_PROTECTION_COOLER false

define THERMAL_PROTECTION_PERIOD 40

define THERMAL_PROTECTION_HYSTERESIS 4

//#define ADAPTIVE_FAN_SPEED

define WATCH_HOTEND_PERIOD 20

define WATCH_HOTEND_INCREASE 2

define WATCH_BED_PERIOD 60

define WATCH_BED_INCREASE 2

define WATCH_CHAMBER_PERIOD 60

define WATCH_CHAMBER_INCREASE 2

define WATCH_COOLER_PERIOD 60

define WATCH_COOLER_INCREASE 2

define PREVENT_COLD_EXTRUSION

define EXTRUDE_MINTEMP 170

//#define PREVENT_LENGTHY_EXTRUDE

define EXTRUDE_MAXLENGTH 400

define SAFETYTIMER_TIME_MINS 30

/***

Configuration_Cartesian * ***/
define KNOWN_MECH

define CUSTOM_MACHINE_NAME "Generic"

define ENDSTOPPULLUP_XMIN true

define ENDSTOPPULLUP_YMIN true

define ENDSTOPPULLUP_ZMIN true

define ENDSTOPPULLUP_XMAX true

define ENDSTOPPULLUP_YMAX true

define ENDSTOPPULLUP_ZMAX true

define ENDSTOPPULLUP_X2MIN true

define ENDSTOPPULLUP_Y2MIN true

define ENDSTOPPULLUP_Z2MIN true

define ENDSTOPPULLUP_Z3MIN true

define ENDSTOPPULLUP_X2MAX true

define ENDSTOPPULLUP_Y2MAX true

define ENDSTOPPULLUP_Z2MAX true

define ENDSTOPPULLUP_Z3MAX true

define ENDSTOPPULLUP_ZPROBE true

define X_MIN_ENDSTOP_LOGIC false

define Y_MIN_ENDSTOP_LOGIC false

define Z_MIN_ENDSTOP_LOGIC false

define X_MAX_ENDSTOP_LOGIC false

define Y_MAX_ENDSTOP_LOGIC false

define Z_MAX_ENDSTOP_LOGIC false

define X2_MIN_ENDSTOP_LOGIC false

define Y2_MIN_ENDSTOP_LOGIC false

define Z2_MIN_ENDSTOP_LOGIC false

define Z3_MIN_ENDSTOP_LOGIC false

define X2_MAX_ENDSTOP_LOGIC false

define Y2_MAX_ENDSTOP_LOGIC false

define Z2_MAX_ENDSTOP_LOGIC false

define Z3_MAX_ENDSTOP_LOGIC false

define Z_PROBE_ENDSTOP_LOGIC false

//#define ENDSTOP_INTERRUPTS_FEATURE

define Z_PROBE_SERVO_NR 0

define Z_SERVO_ANGLES {0,0}

//#define PROBE_MANUALLY //#define Z_PROBE_FIX_MOUNTED //#define BLTOUCH //#define Z_PROBE_SENSORLESS //#define Z_PROBE_SLED

define SLED_DOCKING_OFFSET 5

define X_PROBE_OFFSET_FROM_NOZZLE 0

define Y_PROBE_OFFSET_FROM_NOZZLE 0

define Z_PROBE_OFFSET_FROM_NOZZLE -1

define XY_PROBE_SPEED 8000

define Z_PROBE_SPEED_FAST 1000

define Z_PROBE_SPEED_SLOW 500

define Z_PROBE_REPETITIONS 1

//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define PAUSE_BEFORE_DEPLOY_STOW

define Z_PROBE_DEPLOY_HEIGHT 15

define Z_PROBE_BETWEEN_HEIGHT 10

define Z_PROBE_AFTER_PROBING 0

define Z_PROBE_LOW_POINT -5

define Z_PROBE_OFFSET_RANGE_MIN -50

define Z_PROBE_OFFSET_RANGE_MAX 50

//#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF // Turn fans off when probing //#define LCD_BED_LEVELING

define LCD_Z_STEP 0.025

define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z MIN POS for LCD Z adjustment

//#define MESH_EDIT_MENU // Add a menu to edit mesh points //#define LEVEL_BED_CORNERS

define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling

define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners

define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points

//#define LEVEL_CENTER_TOO // Move to the center after the last corner

define X_HOME_DIR -1

define Y_HOME_DIR -1

define Z_HOME_DIR -1

define MIN_Z_HEIGHT_FOR_HOMING 0

define X_ENABLE_ON 0

define Y_ENABLE_ON 0

define Z_ENABLE_ON 0

define E_ENABLE_ON 0

define INVERT_X_STEP_PIN false

define INVERT_Y_STEP_PIN false

define INVERT_Z_STEP_PIN false

define INVERT_E_STEP_PIN false

define INVERT_X_DIR false

define INVERT_Y_DIR false

define INVERT_Z_DIR false

define INVERT_E0_DIR false

define INVERT_E1_DIR false

define INVERT_E2_DIR false

define INVERT_E3_DIR false

define INVERT_E4_DIR false

define INVERT_E5_DIR false

define DISABLE_X false

define DISABLE_Y false

define DISABLE_Z false

define DISABLE_E false

//#define DISABLE_INACTIVE_EXTRUDER

define X_MAX_POS 200

define X_MIN_POS 0

define Y_MAX_POS 200

define Y_MIN_POS 0

define Z_MAX_POS 200

define Z_MIN_POS 0

define E_MIN_POS 0

define AXIS_RELATIVE_MODES {false, false, false, false}

//#define Z_SAFE_HOMING

define Z_SAFE_HOMING_X_POINT 100

define Z_SAFE_HOMING_Y_POINT 100

//#define MESH_BED_LEVELING //#define AUTO_BED_LEVELING_UBL //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_3POINT //#define MESH_EDIT_GFX_OVERLAY

define MIN_PROBE_EDGE 10

//#define G26_MESH_VALIDATION

define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.

define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.

define MESH_TEST_HOTEND_TEMP 200 // (c) Default nozzle temperature for the G26 Mesh Validation Tool.

define MESH_TEST_BED_TEMP 60 // (c) Default bed temperature for the G26 Mesh Validation Tool.

define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.

//#define MESH_G28_REST_ORIGIN

define UBL_MESH_EDIT_MOVES_Z

//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5

define GRID_MAX_POINTS_X 3

define GRID_MAX_POINTS_Y 3

//#define PROBE_Y_FIRST //#define ABL_BILINEAR_SUBDIVISION

define BILINEAR_SUBDIVISIONS 3

//#define Z_PROBE_END_SCRIPT "G1 Z10 F8000\nG1 X10 Y10\nG1 Z0.5" //#define ENABLE_LEVELING_FADE_HEIGHT //#define BED_CENTER_AT_0_0 //#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0

define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,4000,625,625,625,625,625,625}

define DEFAULT_AXIS_STEPS_PER_UNIT_E {625, 625, 625, 625}

define DEFAULT_MAX_FEEDRATE {300,300,2,100,100,100,100,100,100}

define DEFAULT_MAX_FEEDRATE_E {100, 100, 100, 100}

define MANUAL_FEEDRATE {10060,10060,260,1060}

define SHORT_MANUAL_Z_MOVE 0.025

define DEFAULT_MIN_FEEDRATE 0.0

define DEFAULT_MIN_TRAVEL_FEEDRATE 0.0

define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)

define DEFAULT_MAX_ACCELERATION {3000,3000,50,3000,3000,3000,3000,3000,3000}

define DEFAULT_MAX_ACCELERATION_E {1000, 1000, 1000, 1000}

define DEFAULT_RETRACT_ACCELERATION {10000,10000,10000,10000,10000,10000}

define DEFAULT_ACCELERATION 3000

define DEFAULT_TRAVEL_ACCELERATION 3000

define DEFAULT_XJERK 10

define DEFAULT_YJERK 10

define DEFAULT_ZJERK 0.4

define DEFAULT_EJERK {5,5,5,5,5,5}

define HOMING_FEEDRATE_X (100*60)

define HOMING_FEEDRATE_Y (100*60)

define HOMING_FEEDRATE_Z (2*60)

//#define SLOW_HOMING

define X_HOME_BUMP_MM 5

define Y_HOME_BUMP_MM 5

define Z_HOME_BUMP_MM 2

define HOMING_BUMP_DIVISOR {5,5,2}

define HOTEND_OFFSET_X {0,0,0,0}

define HOTEND_OFFSET_Y {0,0,0,0}

define HOTEND_OFFSET_Z {0,0,0,0}

//#define HYSTERESIS_FEATURE

define HYSTERESIS_AXIS_MM {0,0,0}

define HYSTERESIS_CORRECTION 1

/*****

Configuration_LCD * *****/
define LCD_LANGUAGE en

//#define LCD_LANGUAGE_1 en //#define LCD_LANGUAGE_2 en //#define LCD_LANGUAGE_3 en //#define LCD_LANGUAGE_4 en

define LCD_CHARSET_HD44780 WESTERN

define LCD_INFO_SCREEN_STYLE 0

//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define ULTIMAKERCONTROLLER //#define ULTIPANEL //#define PANEL_ONE //#define G3D_PANEL //#define RIGIDBOT_PANEL //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. //#define ULTRA_LCD //#define RA_CONTROL_PANEL //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 //#define LCM1602 //#define LCD_I2C_PANELOLU2 //#define LCD_I2C_VIKI //#define RADDS_DISPLAY //#define SAV_3DLCD //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

define REPRAPWORLD_GRAPHICAL_LCD

//#define VIKI2 //#define miniVIKI //#define MINIPANEL //#define MAKRPANEL //#define ELB_FULL_GRAPHIC_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER //#define WANHAO_D6_OLED //#define CARTESIO_UI //#define LCD_FOR_MELZI //#define U8GLIB_SSD1306 //#define SAV_3DGLCD //#define U8GLIB_SSD1306 //#define U8GLIB_SH1106 //#define ULTI_CONTROLLER //#define OLED_PANEL_TINYBOY2 //#define MKS_MINI_12864 //#define FYSETC_MINI_12864 //#define CR10_STOCKDISPLAY //#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 //#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller //#define AZSMZ_12864 //#define SILVER_GATE_GLCD_CONTROLLER //#define NEXTION

define NEXTION_SERIAL 1

define NEXTION_MAX_MESSAGE_LENGTH 30

//#define NEXTION_GFX

define NEXTION_FIRMWARE_FILE "mk4duo.tft"

define SHOW_BOOTSCREEN

define BOOTSCREEN_TIMEOUT 2500

define BOOTSCREEN_MKLOGO_HIGH // Show a hight MK4duo logo on the Boot Screen (disable it saving 399 bytes of flash)

//#define BOOTSCREEN_MKLOGO_ANIMATED // Animated MK4duo logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. //#define SHOW_CUSTOM_BOOTSCREEN //#define CUSTOM_STATUS_SCREEN_IMAGE

define XYZ_HOLLOW_FRAME

define MENU_HOLLOW_FRAME

//#define USE_BIG_EDIT_FONT //#define USE_SMALL_INFOFONT //#define DOGM_SPI_DELAY_US 5 //#define OVERLAY_GFX_REVERSE //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)

define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)

define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating

define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating

define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating

//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define GAME_BRICKOUT //#define GAME_INVADERS //#define GAME_SNAKE //#define NO_LCD_MENUS //#define SLIM_LCD_MENUS

define ENCODER_PULSES_PER_STEP 5

define ENCODER_STEPS_PER_MENU_ITEM 1

//#define LCD_SCREEN_ROT_90 // Rotate screen orientation for graphics display by 90 degree clockwise //#define LCD_SCREEN_ROT_180 // Rotate screen orientation for graphics display by 180 degree clockwise //#define LCD_SCREEN_ROT_270 // Rotate screen orientation for graphics display by 270 degree clockwise //#define INVERT_CLICK_BUTTON // Option for invert encoder button logic //#define INVERT_BACK_BUTTON // Option for invert back button logic if avaible //#define REVERSE_ENCODER_DIRECTION //#define REVERSE_MENU_DIRECTION //#define REVERSE_SELECT_DIRECTION

define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly

define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value

define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value

define ULTIPANEL_FEEDMULTIPLY

//#define SPEAKER //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000

define LCD_ALLIGATOR_VOLTAGE_LEVEL 1

define LCD_INFO_MENU

//#define STATUS_MESSAGE_SCROLLING //#define LCD_DECIMAL_SMALL_XY //#define LCD_TIMEOUT_TO_STATUS 15000 //#define LED_CONTROL_MENU //#define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup

define LED_USER_PRESET_RED 255 // User defined RED value

define LED_USER_PRESET_GREEN 255 // User defined GREEN value

define LED_USER_PRESET_BLUE 255 // User defined BLUE value

define LED_USER_PRESET_WHITE 255 // User defined WHITE value

define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity

//#define LCD_PROGRESS_BAR

define PROGRESS_BAR_BAR_TIME 5000U

define PROGRESS_BAR_MSG_TIME 1500U

define PROGRESS_MSG_EXPIRE 0

//#define PROGRESS_MSG_ONCE //#define LCD_PROGRESS_BAR_TEST //#define CUSTOM_USER_MENUS

define USER_SCRIPT_DONE "M117 User Script Done"

define USER_DESC_1 "Home & ABL"

define USER_GCODE_1 "G28\nG29"

define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL

define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)

define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL

define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)

define USER_DESC_4 "Heat Bed/Home/Level"

define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"

define USER_DESC_5 "Home & Info"

define USER_GCODE_5 "G28\nM503"

/*****

Configuration_Feature * *****/
define X_DRIVER_TYPE A4988

define Y_DRIVER_TYPE A4988

define Z_DRIVER_TYPE A4988

define X2_DRIVER_TYPE A4988

define Y2_DRIVER_TYPE A4988

define Z2_DRIVER_TYPE A4988

define Z3_DRIVER_TYPE A4988

define E0_DRIVER_TYPE A4988

define E1_DRIVER_TYPE A4988

define E2_DRIVER_TYPE A4988

define E3_DRIVER_TYPE A4988

define E4_DRIVER_TYPE A4988

define E5_DRIVER_TYPE A4988

define SOFT_PWM_SPEED 0

define FAN_MIN_PWM 0

define FAN_MAX_PWM 255

//#define INVERTED_FAN_PINS

define FAN_PWM_FREQUENCY 250

//#define FAN_KICKSTART_TIME 0

define AUTO_FAN {-1,0,-1,-1,-1,-1}

define HOTEND_AUTO_FAN_TEMPERATURE 50

define HOTEND_AUTO_FAN_SPEED 255

define HOTEND_AUTO_FAN_MIN_SPEED 0

define CONTROLLERFAN_SECS 60

define CONTROLLERFAN_SPEED 255

define CONTROLLERFAN_MIN_SPEED 0

//#define TACHOMETRIC

define TOOL_CHANGE_Z_RAISE 1

//#define TOOL_CHANGE_PARK //#define TOOL_CHANGE_NO_RETURN //#define TOOL_CHANGE_FIL_SWAP

define TOOL_CHANGE_FIL_SWAP_LENGTH 20

define TOOL_CHANGE_FIL_SWAP_PURGE 2

define TOOL_CHANGE_FIL_SWAP_RETRACT_SPEED 3000

define TOOL_CHANGE_FIL_SWAP_PRIME_SPEED 600

//#define VOLUMETRIC_EXTRUSION //#define VOLUMETRIC_DEFAULT_ON

define DEFAULT_NOMINAL_FILAMENT_DIA 1.75

//#define SINGLENOZZLE //#define BARICUDA //#define EXT_SOLENOID //#define COLOR_MIXING_EXTRUDER

define MIXING_STEPPERS 2

define MIXING_VIRTUAL_TOOLS 16

//#define MKR4 //#define INVERTED_RELE_PINS //#define MKR6 //#define INVERTED_RELE_PINS //#define MKR12 //#define INVERTED_RELE_PINS //#define MKSE6

define MKSE6_SERVO_INDEX 0

define MKSE6_SERVOPOS_E0 -60

define MKSE6_SERVOPOS_E1 -30

define MKSE6_SERVOPOS_E2 0

define MKSE6_SERVOPOS_E3 30

define MKSE6_SERVOPOS_E4 60

define MKSE6_SERVOPOS_E5 90

define MKSE6_SERVO_DELAY 1000

//#define PRUSA_MMU2

define MMU2_SERIAL 1

//#define MMU2_MODE_12V

define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"

define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0

define MMU2_LOAD_TO_NOZZLE_SEQUENCE { 7.2, 562 }, { 14.4, 871 }, { 36.0, 1393 }, { 14.4, 871 }, { 50.0, 198 }

define MMU2_RAMMING_SEQUENCE { 1.0, 1000 }, { 1.0, 1500 }, { 2.0, 2000 }, { 1.5, 3000 }, { 2.5, 4000 }, { -15.0, 5000 }, { -14.0, 1200 }, { -6.0, 600 }, { 10.0, 700 }, { -10.0, 400 }, { -50.0, 2000 }

//#define DONDOLO_SINGLE_MOTOR //#define DONDOLO_DUAL_MOTOR

define DONDOLO_SERVO_INDEX 0

define DONDOLO_SERVOPOS_E0 120

define DONDOLO_SERVOPOS_E1 10

define DONDOLO_SERVO_DELAY 1000

//#define IDLE_OOZING_PREVENT

define IDLE_OOZING_MINTEMP 190

define IDLE_OOZING_FEEDRATE 50 //default feedrate for retracting (mm/s)

define IDLE_OOZING_SECONDS 5

define IDLE_OOZING_LENGTH 15 //default retract length (positive mm)

define IDLE_OOZING_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)

define IDLE_OOZING_RECOVER_FEEDRATE 50 //default feedrate for recovering from retraction (mm/s)

//#define EXTRUDER_RUNOUT_PREVENT

define EXTRUDER_RUNOUT_MINTEMP 190

define EXTRUDER_RUNOUT_SECONDS 30

define EXTRUDER_RUNOUT_SPEED 1500 // mm/m

define EXTRUDER_RUNOUT_EXTRUDE 5 // mm

//#define LIN_ADVANCE

define LIN_ADVANCE_K 0.22

//#define WORKSPACE_OFFSETS

define DEFAULT_STEPPER_DEACTIVE_TIME 120

define DISABLE_INACTIVE_X

define DISABLE_INACTIVE_Y

define DISABLE_INACTIVE_Z

define DISABLE_INACTIVE_E

define MIN_SOFTWARE_ENDSTOPS

define MAX_SOFTWARE_ENDSTOPS

define ENDSTOPS_ONLY_FOR_HOMING

//#define ENABLED_ALL_SIX_ENDSTOP //#define SD_ABORT_ON_ENDSTOP_HIT //#define G38_PROBE_TARGET

define G38_MINIMUM_MOVE 0.0275

define ENABLE_SERVOS

define NUM_SERVOS 1

//#define DEACTIVATE_SERVOS_AFTER_MOVE

define SERVO_DEACTIVATION_DELAY 300

//#define Z_LATE_ENABLE

define SLOWDOWN

//#define QUICK_HOME //#define HOME_Y_BEFORE_X //#define FORCE_HOME_XY_BEFORE_Z //#define BABYSTEPPING //#define BABYSTEP_XY

define BABYSTEP_INVERT_Z false

define BABYSTEP_MULTIPLICATOR 1

//#define BABYSTEP_DISPLAY_TOTAL //#define BABYSTEP_ZPROBE_OFFSET //#define DOUBLECLICK_FOR_Z_BABYSTEPPING

define DOUBLECLICK_MAX_INTERVAL 1250U

//#define BABYSTEP_ZPROBE_GFX_OVERLAY //#define BABYSTEP_ZPROBE_GFX_REVERSE //#define FWRETRACT

define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over

define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion

define RETRACT_LENGTH 3 // Default retract length (positive mm)

define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change

define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

define RETRACT_ZLIFT 0 // Default retract Z-lift

define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering)

define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change)

define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s)

define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s)

//#define DUAL_X_CARRIAGE

define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage

define X1_MAX_POS X_MAX_POS // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage

define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage

define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed

define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position

define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position

define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE

define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder

define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder

define DEFAULT_DUPLICATION_X_OFFSET 100

//#define X_TWO_STEPPER_DRIVERS

define INVERT_X2_VS_X_DIR false

//#define X_TWO_ENDSTOPS //#define Y_TWO_STEPPER_DRIVERS

define INVERT_Y2_VS_Y_DIR false

//#define Y_TWO_ENDSTOPS //#define Z_TWO_STEPPER_DRIVERS

define INVERT_Z2_VS_Z_DIR false

//#define Z_TWO_ENDSTOPS //#define Z_THREE_STEPPER_DRIVERS

define INVERT_Z2_VS_Z_DIR false

define INVERT_Z3_VS_Z_DIR false

//#define Z_THREE_ENDSTOPS //#define Z_STEPPER_AUTO_ALIGN

define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }

//#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS

define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }

define Z_STEPPER_ALIGN_AMP 1.0

define Z_STEPPER_ALIGN_ITERATIONS 3

define RESTORE_LEVELING_AFTER_G34

define G34_MAX_GRADE 5

define Z_STEPPER_ALIGN_ACC 0.02

//#define XY_FREQUENCY_LIMIT 15 //#define SF_ARC_FIX //#define BLTOUCH_DELAY 500 //#define BLTOUCH_HIGH_SPEED_MODE //#define BLTOUCH_FORCE_SW_MODE

define BLTOUCH_MODE_5V false

//#define BLTOUCH_FORCE_MODE //#define BLTOUCH_LCD_VOLTAGE_MENU //#define FILAMENT_WIDTH_SENSOR

define FILAMENT_SENSOR_EXTRUDER_NUM 0

define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber

define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it

define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.

define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially

//#define FILAMENT_LCD_DISPLAY //#define FILAMENT_RUNOUT_SENSOR //#define FILAMENT_RUNOUT_DAV_SYSTEM //#define EXTRUDER_ENCODER_CONTROL

define FIL_RUNOUT_0_LOGIC false

define FIL_RUNOUT_1_LOGIC false

define FIL_RUNOUT_2_LOGIC false

define FIL_RUNOUT_3_LOGIC false

define FIL_RUNOUT_4_LOGIC false

define FIL_RUNOUT_5_LOGIC false

define FIL_RUNOUT_0_PULLUP true

define FIL_RUNOUT_1_PULLUP true

define FIL_RUNOUT_2_PULLUP true

define FIL_RUNOUT_3_PULLUP true

define FIL_RUNOUT_4_PULLUP true

define FIL_RUNOUT_5_PULLUP true

define FILAMENT_RUNOUT_DISTANCE_MM 0

define FILAMENT_RUNOUT_THRESHOLD 5

define FILAMENT_RUNOUT_SCRIPT "M600"

//#define POWER_CONSUMPTION

define POWER_VOLTAGE 12.00 //(V) The power supply OUT voltage

define POWER_SENSITIVITY 0.066 //(V/A) How much increase V for 1A of increase

define POWER_OFFSET 0.005 //(A) Help to get 0A when no load is connected.

define POWER_ZERO 2.500 //(V) The /\V coming out from the sensor when no current flow.

define POWER_ERROR 0.0 //(%) Ammortize measure error.

define POWER_EFFICIENCY 100.0 //(%) The power efficency of the power supply

//#define POWER_CONSUMPTION_LCD_DISPLAY //#define FLOWMETER_SENSOR

define FLOWMETER_MAXFLOW 6.0 // Liters per minute max

define FLOWMETER_MAXFREQ 55 // frequency of pulses at max flow

//#define MINFLOW_PROTECTION 4 //#define DOOR_OPEN_FEATURE

define DOOR_OPEN_LOGIC false

define PULLUP_DOOR_OPEN true

//#define POWER_CHECK

define POWER_CHECK_LOGIC false

define PULLUP_POWER_CHECK true

//#define PCF8574_EXPANSION_IO

define PCF8574_ADDRESS 0x39

define EEPROM_SETTINGS

define EEPROM_CHITCHAT

//#define DISABLE_M503

define EEPROM_AUTO_INIT

//#define EEPROM_I2C //#define EEPROM_SPI //#define EEPROM_SD

define EEPROM_FLASH

define SDSUPPORT

//#define USB_FLASH_DRIVE_SUPPORT (NOT USED FOR NOW!!!)

define ADVANCED_SD_COMMAND

//#define SD_HALF_SPEED //#define SD_QUARTER_SPEED //#define SD_EIGHTH_SPEED //#define SD_SIXTEENTH_SPEED

define SD_CHECK_AND_RETRY

define SD_EXTENDED_DIR

//#define SD_DISABLED_DETECT

define SD_DETECT_INVERTED

define SD_FINISHED_STEPPERRELEASE true // if sd support and the file is finished: disable steppers?

define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.

//#define MENU_ADDAUTOSTART //#define SCROLL_LONG_FILENAMES //#define SDCARD_SORT_ALPHA

define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.

define FOLDER_SORTING -1 // -1=above 0=none 1=below

define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M36 g-code.

define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.

define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)

define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.

define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!

define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.

//#define SD_RESTART_FILE // Uncomment to enable

define SD_RESTART_FILE_SAVE_TIME 1

define SD_RESTART_FILE_PURGE_LEN 20 // Purge when restart

define SD_RESTART_FILE_RETRACT_LEN 1 // Retract when restart

//#define PHOTO_GCODE //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J)

define PHOTO_SWITCH_MS 50 // (ms) (M240 D)

//#define CHDK

define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again

//#define RFID_MODULE

define RFID_SERIAL 1

//#define BLINKM //#define RGB_LED //#define RGBW_LED //#define PCA9632 //#define NEOPIXEL_LED

define NEOPIXEL_TYPE NEO_GRB

define NEOPIXEL_PIXELS 16

define NEOPIXEL_IS_SEQUENTIAL

define NEOPIXEL_BRIGHTNESS 127

//#define NEOPIXEL_STARTUP_TEST //#define PRINTER_EVENT_LEDS //#define LASER //#define CNCROUTER //#define CASE_LIGHT

define INVERT_CASE_LIGHT false

define CASE_LIGHT_DEFAULT_ON false

define CASE_LIGHT_DEFAULT_BRIGHTNESS 255

//#define CASE_LIGHT_USE_NEOPIXEL

define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 }

define DOUBLE_QUAD_STEPPING true

//#define JUNCTION_DEVIATION

define JUNCTION_DEVIATION_MM 0.02

//#define BEZIER_JERK_CONTROL

define MINIMUM_STEPPER_PULSE 0

define MAXIMUM_STEPPER_RATE 500000

define DIRECTION_STEPPER_DELAY 0

//#define ADAPTIVE_STEP_SMOOTHING

define X_MICROSTEPS 16

define Y_MICROSTEPS 16

define Z_MICROSTEPS 16

define E0_MICROSTEPS 16

define E1_MICROSTEPS 16

define E2_MICROSTEPS 16

define E3_MICROSTEPS 16

define E4_MICROSTEPS 16

define E5_MICROSTEPS 16

define X_CURRENT 800

define Y_CURRENT 800

define Z_CURRENT 800

define E0_CURRENT 800

define E1_CURRENT 800

define E2_CURRENT 800

define E3_CURRENT 800

define E4_CURRENT 800

define E5_CURRENT 800

define DIGIPOT_MOTOR_CURRENT {135, 135, 135, 135, 135}

define PWM_MOTOR_CURRENT {1200, 1000, 1000}

//#define DIGIPOT_I2C

define DIGIPOT_I2C_NUM_CHANNELS 8

define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}

//#define SERVICE_NAME_1 "Service 1" //#define SERVICE_TIME_1 100 //#define SERVICE_NAME_2 "Service 2" //#define SERVICE_TIME_2 100 //#define SERVICE_NAME_3 "Service 3" //#define SERVICE_TIME_3 100

define SERVICE_WARNING_BUZZES 3

define NUM_POSITON_SLOTS 1

define DEFAULT_MIN_SEGMENT_TIME 20000

//#define ARC_SUPPORT

define MM_PER_ARC_SEGMENT 1 // Length of each arc segment

define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle

define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections

//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes

define MIN_STEPS_PER_SEGMENT 6

//#define M100_FREE_MEMORY_WATCHER

define M100_FREE_MEMORY_DUMPER

define M100_FREE_MEMORY_CORRUPTOR

//#define NOZZLE_CLEAN_FEATURE

define NOZZLE_CLEAN_STROKES 12

define NOZZLE_CLEAN_TRIANGLES 3

define NOZZLE_CLEAN_START_POINT {30,30,1}

define NOZZLE_CLEAN_END_POINT {100,60,1}

define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5

define NOZZLE_CLEAN_CIRCLE_FN 10

define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT

define NOZZLE_CLEAN_GOBACK

//#define NOZZLE_CLEAN_NO_Z //#define NOZZLE_PARK_FEATURE

define NOZZLE_PARK_POINT {10,10,20}

define NOZZLE_PARK_XY_FEEDRATE 100

define NOZZLE_PARK_Z_FEEDRATE 5

//#define ADVANCED_PAUSE_FEATURE

define PAUSE_PARK_RETRACT_FEEDRATE 20

define PAUSE_PARK_RETRACT_LENGTH 5

define PAUSE_PARK_UNLOAD_FEEDRATE 50

define PAUSE_PARK_UNLOAD_LENGTH 100

define PAUSE_PARK_SLOW_LOAD_FEEDRATE 6

define PAUSE_PARK_SLOW_LOAD_LENGTH 5

define PAUSE_PARK_FAST_LOAD_FEEDRATE 50

define PAUSE_PARK_FAST_LOAD_LENGTH 100

define PAUSE_PARK_PURGE_FEEDRATE 5

define PAUSE_PARK_PURGE_LENGTH 50

define FILAMENT_UNLOAD_RETRACT_LENGTH 10

define FILAMENT_UNLOAD_DELAY 5000

define FILAMENT_UNLOAD_PURGE_LENGTH 8

define PAUSE_PARK_NOZZLE_TIMEOUT 45

define PAUSE_PARK_PRINTER_OFF 5

define PAUSE_PARK_NUMBER_OF_ALERT_BEEPS 5

define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.

//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define INCH_MODE_SUPPORT //#define JSON_OUTPUT //#define SCAD_MESH_OUTPUT //#define PINS_DEBUGGING //#define DEBUG_FEATURE //#define USE_WATCHDOG //#define WATCHDOG_RESET_MANUAL //#define START_GCODE

define START_PRINTING_SCRIPT "G28\nG1 Z10 F8000"

//#define STOP_GCODE

define STOP_PRINTING_SCRIPT "G28\nM107\nM104 T0 S0\nM140 S0\nM84\nM81"

define PROPORTIONAL_FONT_RATIO 1

/****

Configuration_Motor_Driver * ****/
define X_SENSE_RESISTOR 91

define X2_SENSE_RESISTOR 91

define Y_SENSE_RESISTOR 91

define Y2_SENSE_RESISTOR 91

define Z_SENSE_RESISTOR 91

define Z2_SENSE_RESISTOR 91

define Z3_SENSE_RESISTOR 91

define E0_SENSE_RESISTOR 91

define E1_SENSE_RESISTOR 91

define E2_SENSE_RESISTOR 91

define E3_SENSE_RESISTOR 91

define E4_SENSE_RESISTOR 91

define E5_SENSE_RESISTOR 91

define R_SENSE 0.11 // R_sense resistor

define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256

//#define TMC_USE_SW_SPI //#define SENSORLESS_HOMING

define X_STALL_SENSITIVITY 8

define Y_STALL_SENSITIVITY 8

define Z_STALL_SENSITIVITY 8

//#define SPI_ENDSTOPS //#define IMPROVE_HOMING_RELIABILITY //#define SQUARE_WAVE_STEPPING //#define TMC_DEBUG //#define TMC_Z_CALIBRATION

define CALIBRATION_CURRENT 250

define CALIBRATION_EXTRA_HEIGHT 10

//#define TMC_SOFTWARE_DRIVER_ENABLE

define X_STEALTHCHOP false

define Y_STEALTHCHOP false

define Z_STEALTHCHOP false

define E0_STEALTHCHOP false

define E1_STEALTHCHOP false

define E2_STEALTHCHOP false

define E3_STEALTHCHOP false

define E4_STEALTHCHOP false

define E5_STEALTHCHOP false

define CHOPPER_DEFAULT_12V { 3, -1, 1 }

define CHOPPER_DEFAULT_19V { 4, 1, 1 }

define CHOPPER_DEFAULT_24V { 4, 2, 1 }

define CHOPPER_DEFAULT_36V { 5, 2, 4 }

define CHOPPER_PRUSAMK3_24V { 3, -2, 6 } // Imported parameters from the official Prusa firmware for MK3 (24V)

define CHOPPER_MK4DUO_436 { 5, 2, 3 } // Old defaults from MK4duo v4.3.6

define CHOPPER_TIMING CHOPPER_DEFAULT_12V

//#define MONITOR_DRIVER_STATUS //#define MONITOR_DRIVER_STATUS_INTERVAL_MS 500u //#define CURRENT_STEP_DOWN 50 // [mA] //#define REPORT_CURRENT_CHANGE //#define STOP_ON_ERROR //#define HYBRID_THRESHOLD

define X_HYBRID_THRESHOLD 100

define Y_HYBRID_THRESHOLD 100

define Z_HYBRID_THRESHOLD 2

define E0_HYBRID_THRESHOLD 30

define E1_HYBRID_THRESHOLD 30

define E2_HYBRID_THRESHOLD 30

define E3_HYBRID_THRESHOLD 30

define E4_HYBRID_THRESHOLD 30

define E5_HYBRID_THRESHOLD 30

define TMC_ADV() { }

//#define X_HARDWARE_SERIAL Serial1 //#define X2_HARDWARE_SERIAL Serial1 //#define Y_HARDWARE_SERIAL Serial1 //#define Y2_HARDWARE_SERIAL Serial1 //#define Z_HARDWARE_SERIAL Serial1 //#define Z2_HARDWARE_SERIAL Serial1 //#define Z3_HARDWARE_SERIAL Serial1 //#define E0_HARDWARE_SERIAL Serial1 //#define E1_HARDWARE_SERIAL Serial1 //#define E2_HARDWARE_SERIAL Serial1 //#define E3_HARDWARE_SERIAL Serial1 //#define E4_HARDWARE_SERIAL Serial1 //#define E5_HARDWARE_SERIAL Serial1

define X_SERIAL_TX_PIN NoPin

define X_SERIAL_RX_PIN NoPin

define X2_SERIAL_TX_PIN NoPin

define X2_SERIAL_RX_PIN NoPin

define Y_SERIAL_TX_PIN NoPin

define Y_SERIAL_RX_PIN NoPin

define Y2_SERIAL_TX_PIN NoPin

define Y2_SERIAL_RX_PIN NoPin

define Z_SERIAL_TX_PIN NoPin

define Z_SERIAL_RX_PIN NoPin

define Z2_SERIAL_TX_PIN NoPin

define Z2_SERIAL_RX_PIN NoPin

define Z3_SERIAL_TX_PIN NoPin

define Z3_SERIAL_RX_PIN NoPin

define E0_SERIAL_TX_PIN NoPin

define E0_SERIAL_RX_PIN NoPin

define E1_SERIAL_TX_PIN NoPin

define E1_SERIAL_RX_PIN NoPin

define E2_SERIAL_TX_PIN NoPin

define E2_SERIAL_RX_PIN NoPin

define E3_SERIAL_TX_PIN NoPin

define E3_SERIAL_RX_PIN NoPin

define E4_SERIAL_TX_PIN NoPin

define E4_SERIAL_RX_PIN NoPin

define E5_SERIAL_TX_PIN NoPin

define E5_SERIAL_RX_PIN NoPin

define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high

define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off

define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall

define X2_K_VAL 50

define X2_OVERCURRENT 2000

define X2_STALLCURRENT 1500

define Y_K_VAL 50

define Y_OVERCURRENT 2000

define Y_STALLCURRENT 1500

define Y2_K_VAL 50

define Y2_OVERCURRENT 2000

define Y2_STALLCURRENT 1500

define Z_K_VAL 50

define Z_OVERCURRENT 2000

define Z_STALLCURRENT 1500

define Z2_K_VAL 50

define Z2_OVERCURRENT 2000

define Z2_STALLCURRENT 1500

define Z3_K_VAL 50

define Z3_OVERCURRENT 2000

define Z3_STALLCURRENT 1500

define E0_K_VAL 50

define E0_OVERCURRENT 2000

define E0_STALLCURRENT 1500

define E1_K_VAL 50

define E1_OVERCURRENT 2000

define E1_STALLCURRENT 1500

define E2_K_VAL 50

define E2_OVERCURRENT 2000

define E2_STALLCURRENT 1500

define E3_K_VAL 50

define E3_OVERCURRENT 2000

define E3_STALLCURRENT 1500

define E4_K_VAL 50

define E4_OVERCURRENT 2000

define E4_STALLCURRENT 1500

define E5_K_VAL 50

define E5_OVERCURRENT 2000

define E5_STALLCURRENT 1500

/* Below you will find the configuration string, that created with Configurator tool online marlinkimbra.it ========== Start configuration string ========== { "processor": 1, "serial": 0, "baudrates": 250000, "serial2": -2, "baudrates2": 250000, "blockbuffersize": 32, "bufsize": 8, "txbuffersize": 32, "rxbuffersize": 1024, "serialxonxoff": "1", "customname": "none", "customconfig": "default config", "machineuuid": "00000000-0000-0000-0000-000000000000", "killMethod": 0, "notimeouts": 1000, "advancedok": "0", "emergencyparser": "0", "fastergcodeparser": "1", "fastergcodeexecute": "1", "hostkeepalive": "1", "hostkeepalivesecond": 2, "motherboards": "BOARD_ULTRATRONICS", "mechanism": 0, "power": 0, "defaultpower": "0", "delayafterpower": 5, "powertimeout": 30, "extruders": 2, "driverextruders": 2, "tempunitsupport": "0", "bed": "0", "chamber": "0", "cooler": "0", "nbed": 0, "nchamber": 0, "dhtsupport": "0", "tempsensor0": "1", "tempsensor1": "0", "tempsensor2": "0", "tempsensor3": "0", "tempsensor4": "0", "tempsensor5": "0", "tempsensorbed": "0", "tempsensorbed1": "0", "tempsensorbed2": "0", "tempsensorbed3": "0", "tempsensorchamber": "0", "tempsensorchamber1": "0", "tempsensorchamber2": "0", "tempsensorchamber3": "0", "tempsensorcooler": "0", "seriesrs": 4700, "t9name": "User sensor", "t9r25": 100000, "t9betak": 4036, "ad595offset": 0, "ad595gain": 1, "dummy998": 25, "dummy999": 100, "maxtemp0": 275, "maxtemp1": 275, "maxtemp2": 275, "maxtemp3": 275, "maxtemp4": 275, "maxtemp5": 275, "maxtempbed": 150, "maxtempchamber": 150, "maxtempcooler": 150, "mintemp0": 5, "mintemp1": 5, "mintemp2": 5, "mintemp3": 5, "mintemp4": 5, "mintemp5": 5, "mintempbed": 5, "mintempchamber": 5, "mintempcooler": 5, "maxconsecutivelowtemp": 2, "preheat1label": "PLA", "preheat1hotendtemp": 190, "preheat1bedtemp": 60, "preheat1chambertemp": 0, "preheat1fanspeed": 255, "preheat2label": "ABS", "preheat2hotendtemp": 240, "preheat2bedtemp": 100, "preheat2chambertemp": 50, "preheat2fanspeed": 255, "preheat3label": "GUM", "preheat3hotendtemp": 230, "preheat3bedtemp": 60, "preheat3chambertemp": 50, "preheat3fanspeed": 255, "autotemp": "0", "autotempoldweight": 0.98, "pidtemp": "1", "pidmax": 255, "piddrivemin": 40, "piddrivemax": 230, "pidfunctionalrange": 10, "pidautotunemenu": "1", "pidextrusionrate": "0", "lpqmaxlen": 50, "temphysteresis": 2, "tempinterval": 100, "pidkp0": 40, "pidki0": 7, "pidkd0": 60, "pidkc0": 100, "pidkp1": 40, "pidki1": 7, "pidkd1": 60, "pidkc1": 100, "pidkp2": 40, "pidki2": 7, "pidkd2": 60, "pidkc2": 100, "pidkp3": 40, "pidki3": 7, "pidkd3": 60, "pidkc3": 100, "pidkp4": 40, "pidki4": 7, "pidkd4": 60, "pidkc4": 100, "pidkp5": 40, "pidki5": 7, "pidkd5": 60, "pidkc5": 100, "pidbedtemp": "0", "pidbedmax": 255, "pidbeddrivemin": 40, "pidbeddrivemax": 230, "bedhysteresis": 2, "bedinterval": 500, "pidbedkp": 10, "pidbedki": 1, "pidbedkd": 300, "pidbedkp1": 10, "pidbedki1": 1, "pidbedkd1": 300, "pidbedkp2": 10, "pidbedki2": 1, "pidbedkd2": 300, "pidbedkp3": 10, "pidbedki3": 1, "pidbedkd3": 300, "pidchambertemp": "0", "pidchambermax": 255, "pidchamberdrivemin": 80, "pidchamberdrivemax": 255, "chamberhysteresis": 2, "chamberinterval": 500, "pidchamberkp": 10, "pidchamberki": 1, "pidchamberkd": 300, "pidchamberkp1": 10, "pidchamberki1": 1, "pidchamberkd1": 300, "pidchamberkp2": 10, "pidchamberki2": 1, "pidchamberkd2": 300, "pidchamberkp3": 10, "pidchamberki3": 1, "pidchamberkd3": 300, "pidcoolertemp": "0", "pidcoolermax": 255, "pidcoolerdrivemin": 80, "pidcoolerdrivemax": 255, "coolerhysteresis": 2, "coolerinterval": 500, "pidcoolerkp": 10, "pidcoolerki": 1, "pidcoolerkd": 305, "invertedheaterpins": "0", "invertedbedpin": "0", "invertedchamberpin": "0", "invertedcoolerpin": "0", "thermalprotectionhotend": "0", "thermalprotectionbed": "0", "thermalprotectionchamber": "0", "thermalprotectioncooler": "0", "adaptivefanspeed": "0", "thermalprotectionperiod": 40, "thermalprotectionhysteresis": 4, "watchtempperiod": 20, "watchtempincrease": 2, "watchbedtempperiod": 60, "watchbedtempincrease": 2, "watchchambertempperiod": 60, "watchchambertempincrease": 2, "watchcoolertempperiod": 60, "watchcoolertempincrease": 2, "uiprintername": "Generic", "endstopinterrupt": "0", "Xminendstop": "0", "Xmaxendstop": "0", "Yminendstop": "0", "Ymaxendstop": "0", "Zminendstop": "0", "Zmaxendstop": "0", "X2minendstop": "0", "X2maxendstop": "0", "Y2minendstop": "0", "Y2maxendstop": "0", "Z2minendstop": "0", "Z2maxendstop": "0", "Z3minendstop": "0", "Z3maxendstop": "0", "Zprobeendstop": "0", "Xhoming": 0, "Yhoming": 0, "Zhoming": 0, "Ehoming": 0, "Xinvertenable": 0, "Yinvertenable": 0, "Zinvertenable": 0, "Einvertenable": 0, "Xinvertstep": "0", "Yinvertstep": "0", "Zinvertstep": "0", "Einvertstep": "0", "Xinvertdir": "0", "Yinvertdir": "0", "Zinvertdir": "0", "E0invertdir": "0", "E1invertdir": "0", "E2invertdir": "0", "E3invertdir": "0", "E4invertdir": "0", "E5invertdir": "0", "disableX": "1", "disableY": "1", "disableZ": "1", "disableE": "1", "Xmaxpos": 200, "Xminpos": 0, "Ymaxpos": 200, "Yminpos": 0, "Zmaxpos": 200, "Zminpos": 0, "Zsafehoming": "0", "ZsafehomingX": 100, "ZsafehomingY": 100, "Zminheightbeforehoming": 0, "Zprobetype": "2", "Zprobesledoffset": 5, "Xprobeoffset": 0, "Yprobeoffset": 0, "Zprobeoffset": -1, "xyprobespeed": 8000, "zprobespeedfast": 1000, "zprobespeedslow": 500, "zprobingrepeat": "0", "Zproberepetitions": 1, "Zraiseprobedeploystow": 15, "Zraisebetweenprobe": 10, "Zraiseafterprobe": 0, "Zprobelowpoint": -5, "bltouch5vmode": "0", "lcdbedlevel": "0", "lcdzstep": 0.025, "lcdprobezrange": 4, "levelingfadeheight": "0", "bedlevel": 0, "meshinset": 10, "meshg28rest": "0", "maxgridpointX": 3, "maxgridpointY": 3, "manualhomepos": "0", "bedcenter00": "0", "Xhomepos": 0, "Yhomepos": 0, "Zhomepos": 0, "Xstepspermm": 80, "Ystepspermm": 80, "Zstepspermm": 4000, "E0stepspermm": 625, "E1stepspermm": 625, "E2stepspermm": 625, "E3stepspermm": 625, "E4stepspermm": 625, "E5stepspermm": 625, "Xmaxspeed": 300, "Ymaxspeed": 300, "Zmaxspeed": 2, "E0maxspeed": 100, "E1maxspeed": 100, "E2maxspeed": 100, "E3maxspeed": 100, "E4maxspeed": 100, "E5maxspeed": 100, "Xmanualspeed": 100, "Ymanualspeed": 100, "Zmanualspeed": 2, "Emanualspeed": 10, "minimumspeed": 0, "minimumtravelspeed": 0, "minimumplannerspeed": 0.05, "Xmaxacceleration": 3000, "Ymaxacceleration": 3000, "Zmaxacceleration": 50, "E0maxacceleration": 3000, "E1maxacceleration": 3000, "E2maxacceleration": 3000, "E3maxacceleration": 3000, "E4maxacceleration": 3000, "E5maxacceleration": 3000, "E0retractacceleration": 10000, "E1retractacceleration": 10000, "E2retractacceleration": 10000, "E3retractacceleration": 10000, "E4retractacceleration": 10000, "E5retractacceleration": 10000, "defaultacceleration": 3000, "defaulttravelacceleration": 3000, "maxXjerk": 10, "maxYjerk": 10, "maxZjerk": 0.4, "maxE0jerk": 5, "maxE1jerk": 5, "maxE2jerk": 5, "maxE3jerk": 5, "maxE4jerk": 5, "maxE5jerk": 5, "Xhomingspeed": 100, "Yhomingspeed": 100, "Zhomingspeed": 2, "XbumpMM": 5, "YbumpMM": 5, "ZbumpMM": 2, "Xbumpdivisor": 5, "Ybumpdivisor": 5, "Zbumpdivisor": 2, "hotendoffsetXE1": 0, "hotendoffsetXE2": 0, "hotendoffsetXE3": 0, "hotendoffsetYE1": 0, "hotendoffsetYE2": 0, "hotendoffsetYE3": 0, "hotendoffsetZE1": 0, "hotendoffsetZE2": 0, "hotendoffsetZE3": 0, "hysteresis": "0", "hysteresisXmm": 0, "hysteresisYmm": 0, "hysteresisZmm": 0, "hysteresiscorrection": 1, "deltasegmentpersecond": 200, "deltasegmentperline": 20, "deltadiagonalrod": 220, "deltasmoothrodoffset": 145, "deltaeffectoroffset": 20, "deltacarriageoffset": 20, "deltaprinterradius": 70, "deltaheight": 210, "towerAendstop": 0, "towerBendstop": 0, "towerCendstop": 0, "towerAangle": 0, "towerBangle": 0, "towerCangle": 0, "towerAradius": 0, "towerBradius": 0, "towerCradius": 0, "towerAdiagonalrod": 0, "towerBdiagonalrod": 0, "towerCdiagonalrod": 0, "deltaautoprecision": 0.1, "deltaautogrid": 7, "deltaXdeploystart": 0, "deltaYdeploystart": 0, "deltaZdeploystart": 30, "deltaXdeployend": 0, "deltaYdeployend": 0, "deltaZdeployend": 30, "deltaXretractstart": 0, "deltaYretractstart": 0, "deltaZretractstart": 30, "deltaXretractend": 0, "deltaYretractend": 0, "deltaZretractend": 0, "deltaautocalibration": 0, "deltahomesafezone": "1", "deltahomeonpower": "0", "lcdlanguages": "en", "displays": 14, "encoderpulsesstep": 5, "encoderstepmenu": 1, "invertclickbutton": "0", "invertbackbutton": "0", "invertrotaryswitch": "0", "invertmenudirection": "0", "lcdspeaker": "0", "nextion_model": 8, "nextion_port": 1, "nextionGFX": "0", "lcdprogressbar": 0, "lcdprogressbarbartime": 3, "lcdprogressbarmsgtime": 1, "lcdprogressbarmsgexpire": 0, "doublequadstepping": "1", "junctiondeviation": "0", "junctiondeviationfactor": 0.02, "bezierjerk": "0", "stepperpulse": 0, "stepperrate": 500000, "directiondelay": 0, "stepsmoothing": "0", "Xtwostepper": "0", "X2vsXdir": "0", "Xtwoendstop": "0", "Ytwostepper": "0", "Y2vsYdir": "0", "Ytwoendstop": "0", "Ztwostepper": "0", "Z2vsZdir": "0", "Ztwoendstop": "0", "Zthreestepper": "0", "Z3vsZdir": "0", "Zthreeendstop": "0", "extencoder": "0", "extencodererrorstep": 500, "extencoderminstep": 10, "Xmicrostep": 16, "Ymicrostep": 16, "Zmicrostep": 16, "E0microstep": 16, "E1microstep": 16, "E2microstep": 16, "E3microstep": 16, "E4microstep": 16, "E5microstep": 16, "Xcurrent": 800, "Ycurrent": 800, "Zcurrent": 800, "E0current": 800, "E1current": 800, "E2current": 800, "E3current": 800, "E4current": 800, "E5current": 800, "Xdrivertype": "A4988", "Ydrivertype": "A4988", "Zdrivertype": "A4988", "X2drivertype": "A4988", "Y2drivertype": "A4988", "Z2drivertype": "A4988", "Z3drivertype": "A4988", "E0drivertype": "A4988", "E1drivertype": "A4988", "E2drivertype": "A4988", "E3drivertype": "A4988", "E4drivertype": "A4988", "E5drivertype": "A4988", "softpwmspeed": 0, "fanminpwm": 0, "fanmaxpwm": 255, "fanpwmfreq": 250, "fankickstarttime": 0, "autofan0": -1, "autofan1": 0, "autofan2": -1, "autofan3": -1, "autofan4": -1, "autofan5": -1, "Ecoolertemp": 50, "Ecoolerspeed": 255, "Ecoolerminspeed": 0, "controllerfansec": 60, "controllerfanspeed": 255, "controllerfanminspeed": 0, "toolzraise": 1, "toolpark": "0", "toolnoreturn": "0", "toolfilamentswap": "0", "toolfilamentlenght": 20, "toolfilamentpurge": 2, "toolfilamentspeed": 3000, "toolfilamentprimespeed": 600, "defaultfilamentdia": 1.75, "dangerousextrude": "1", "extrudemintemp": 170, "lengthextrude": "1", "extrudemaxlenght": 400, "singlenozzle": "0", "baricuda": "0", "colormixingextruder": "0", "mixingsteppers": "2", "virtualtools": 16, "mkr4": "0", "invertrelepin": "0", "E0E1pin": -1, "E0E2pin": -1, "E1E3pin": -1, "mkr6": "0", "mkr12": "0", "EX1pin": -1, "EX2pin": -1, "mmu2": "0", "mmu2serial": 1, "mmu2mode12": "0", "mmu2rstpin": -1, "dondolo": "0", "dondolodualmotor": "0", "dondoloservo": 0, "dondoloservoe0": 120, "dondoloservoe1": 10, "dondolodelay": 1000, "workspace": "0", "softwareminendstop": "1", "softwaremaxendstop": "1", "endstoponlyforhome": "1", "abortendstophit": "0", "servos": "1", "numservos": 1, "Zservo": 0, "angleextendservosZ": 0, "angleretractservosZ": 0, "servodeactivate": "0", "servodeactivatedelay": 300, "quickhome": "0", "homeYbeforeX": "0", "homeXYbeforeZ": "0", "babystepping": "0", "babysteppingXY": "0", "babysteppingZprobe": "0", "babysteppingdoubleclick": "0", "filamentsensor": "0", "filamentsensorextruder": 0, "filamentsensormaxdia": 2, "filamentsensormindia": 1.35, "filamentsensordia": 1.75, "filamentsensorlcd": "0", "filamentrunout": "0", "filamentrunoutdav": "0", "filamentrunoutdistance": 0, "filamentrunoutscript": "M600", "filamentsensor0": "0", "filamentsensor1": "0", "filamentsensor2": "0", "filamentsensor3": "0", "filamentsensor4": "0", "filamentsensor5": "0", "powerconsumption": "0", "dooropen": "0", "doorendstop": "0", "powercheck": "0", "powercheckendstop": "0", "caselight": "0", "caselightinvert": "0", "caselightdefault": "0", "caselightbrightness": 255, "eeprom": "1", "eepromsd": "2", "eepromchitchat": "1", "sdsupport": 0, "sdspeed": 1, "sddisableddetect": "0", "sddetectinverted": "0", "sdrestart": "0", "sdrestarttime": 1, "laserbeam": "0", "lasercontrol": 1, "laserfocus": "0", "laserraster": "0", "rfidmodule": "0", "rfidserial": 1, "rgbled": "0", "rgbwled": "0", "pca9632": "0", "neopixelled": "0", "neopixeltype": "NEO_GRB", "neopixelpixels": 16, "eventled": "0", "jsonoutput": "0", "testmode": "0", "inchmodesupport": "0", "nozzlecleanfeature": "0", "nozzlecleanstrokes": 12, "nozzlecleantriangle": 3, "nozzlecleanstart_x": 30, "nozzlecleanstart_y": 30, "nozzlecleanstart_z": 1, "nozzlecleanend_x": 100, "nozzlecleanend_y": 60, "nozzlecleanend_z": 1, "nozzlecleangoback": "1", "nozzleparkfeature": "0", "nozzleparkXpos": 10, "nozzleparkYpos": 10, "nozzleparkZpos": 20, "nozzleparkXYfr": 100, "nozzleparkZfr": 5, "filamentchangeenable": "0", "filamentchangeretract": 5, "filamentchangeretractfr": 20, "filamentchangeunload": 100, "filamentchangeunloadfr": 50, "filamentchangeslowload": 5, "filamentchangeslowloadfr": 6, "filamentchangefastload": 100, "filamentchangefastloadfr": 50, "filamentchangeextrude": 50, "filamentchangeextrudefr": 5, "filamentchangeunloadretract": 10, "filamentchangeunloadretractdelay": 5000, "filamentchangeunloadretractpurge": 8, "filamentchangenozzletimeout": 45, "filamentchangeprinteroff": 5, "filamentchangenumberbeep": 5, "filamentchangenosteppertimeout": "1", "filamentchangeparkheadonpause": "0", "filamentchangehomebefore": "0", "filamentchangegcodes": "0", "filamentchangeallextruder": "0", "Xmotor": { "name": "X motor", "step": "ORIG_X_STEP_PIN", "dir": "ORIG_X_DIR_PIN", "enable": "ORIG_X_ENABLE_PIN" }, "Ymotor": { "name": "Y motor", "step": "ORIG_Y_STEP_PIN", "dir": "ORIG_Y_DIR_PIN", "enable": "ORIG_Y_ENABLE_PIN" }, "Zmotor": { "name": "Z motor", "step": "ORIG_Z_STEP_PIN", "dir": "ORIG_Z_DIR_PIN", "enable": "ORIG_Z_ENABLE_PIN" }, "X2motor": { "name": "Extruder 1", "step": "ORIG_E1_STEP_PIN", "dir": "ORIG_E1_DIR_PIN", "enable": "ORIG_E1_ENABLE_PIN" }, "Y2motor": { "name": "Extruder 1", "step": "ORIG_E1_STEP_PIN", "dir": "ORIG_E1_DIR_PIN", "enable": "ORIG_E1_ENABLE_PIN" }, "Z2motor": { "name": "Extruder 1", "step": "ORIG_E1_STEP_PIN", "dir": "ORIG_E1_DIR_PIN", "enable": "ORIG_E1_ENABLE_PIN" }, "Z3motor": { "name": "Extruder 2", "step": "ORIG_E2_STEP_PIN", "dir": "ORIG_E2_DIR_PIN", "enable": "ORIG_E2_ENABLE_PIN" }, "E0motor": { "name": "Extruder 0", "step": "ORIG_E0_STEP_PIN", "dir": "ORIG_E0_DIR_PIN", "enable": "ORIG_E0_ENABLE_PIN" }, "E1motor": { "name": "Extruder 1", "step": "ORIG_E1_STEP_PIN", "dir": "ORIG_E1_DIR_PIN", "enable": "ORIG_E1_ENABLE_PIN" }, "E2motor": { "name": "Extruder 2", "step": "ORIG_E2_STEP_PIN", "dir": "ORIG_E2_DIR_PIN", "enable": "ORIG_E2_ENABLE_PIN" }, "E3motor": { "name": "Extruder 3", "step": "ORIG_E3_STEP_PIN", "dir": "ORIG_E3_DIR_PIN", "enable": "ORIG_E3_ENABLE_PIN" }, "E4motor": { "name": "Extruder 4", "step": "ORIG_E4_STEP_PIN", "dir": "ORIG_E4_DIR_PIN", "enable": "ORIG_E4_ENABLE_PIN" }, "E5motor": { "name": "Extruder 5", "step": "ORIG_E5_STEP_PIN", "dir": "ORIG_E5_DIR_PIN", "enable": "ORIG_E5_ENABLE_PIN" }, "heater0pin": "ORIG_HEATER_HE0_PIN", "heater1pin": "ORIG_HEATER_HE1_PIN", "heater2pin": "ORIG_HEATER_HE2_PIN", "heater3pin": "ORIG_HEATER_HE3_PIN", "heater4pin": "ORIG_HEATER_HE4_PIN", "heater5pin": "ORIG_HEATER_HE5_PIN", "heaterbedpin": "ORIG_HEATER_BED0_PIN", "heaterbed1pin": "ORIG_HEATER_BED1_PIN", "heaterbed2pin": "ORIG_HEATER_BED2_PIN", "heaterbed3pin": "ORIG_HEATER_BED3_PIN", "heaterchamberpin": "NoPin", "heaterchamber1pin": "NoPin", "heaterchamber2pin": "NoPin", "heaterchamber3pin": "NoPin", "heatercoolerpin": "NoPin", "temp0pin": "ORIG_TEMP_HE0_PIN", "temp1pin": "ORIG_TEMP_HE1_PIN", "temp2pin": "ORIG_TEMP_HE2_PIN", "temp3pin": "ORIG_TEMP_HE3_PIN", "temp4pin": "ORIG_TEMP_HE4_PIN", "temp5pin": "ORIG_TEMP_HE5_PIN", "tempbedpin": "ORIG_TEMP_BED0_PIN", "tempbed1pin": "ORIG_TEMP_BED1_PIN", "tempbed2pin": "ORIG_TEMP_BED2_PIN", "tempbed3pin": "ORIG_TEMP_BED3_PIN", "tempchamberpin": "NoPin", "tempchamber1pin": "NoPin", "tempchamber2pin": "NoPin", "tempchamber3pin": "NoPin", "tempcoolerpin": "NoPin", "Xminpin": "ORIG_X_MIN_PIN", "Xmaxpin": "ORIG_X_MAX_PIN", "Yminpin": "ORIG_Y_MIN_PIN", "Ymaxpin": "ORIG_Y_MAX_PIN", "Zminpin": "ORIG_Z_MIN_PIN", "Zmaxpin": "ORIG_Z_MAX_PIN", "X2minpin": "NoPin", "X2maxpin": "NoPin", "Y2minpin": "NoPin", "Y2maxpin": "NoPin", "Z2minpin": "NoPin", "Z3minpin": "NoPin", "Z2maxpin": "NoPin", "Z3maxpin": "NoPin", "Zprobepin": "NoPin", "Xcspin": "ORIG_X_CS_PIN", "Ycspin": "ORIG_Y_CS_PIN", "Zcspin": "ORIG_Z_CS_PIN", "X2cspin": "ORIG_E1_CS_PIN", "Y2cspin": "ORIG_E1_CS_PIN", "Z2cspin": "ORIG_E1_CS_PIN", "Z3cspin": "ORIG_E2_CS_PIN", "E0cspin": "ORIG_E0_CS_PIN", "E1cspin": "ORIG_E1_CS_PIN", "E2cspin": "ORIG_E2_CS_PIN", "E3cspin": "ORIG_E3_CS_PIN", "E4cspin": "ORIG_E4_CS_PIN", "E5cspin": "ORIG_E5_CS_PIN", "fanpin": "ORIG_FAN0_PIN", "fan1pin": "ORIG_FAN1_PIN", "fan2pin": "ORIG_FAN2_PIN", "fan3pin": "ORIG_FAN3_PIN", "fan4pin": "ORIG_FAN4_PIN", "fan5pin": "ORIG_FAN5_PIN", "PSONpin": "ORIG_PS_ON_PIN", "beeperpin": "ORIG_BEEPER_PIN", "filamentsensorpin": "NoPin", "filrunoutdavpin": "NoPin", "filrunoutpin0": "NoPin", "filrunoutpin1": "NoPin", "filrunoutpin2": "NoPin", "filrunoutpin3": "NoPin", "filrunoutpin4": "NoPin", "filrunoutpin5": "NoPin", "laserpwrpin": "ORIG_LASER_PWR_PIN", "laserpwmpin": "ORIG_LASER_PWM_PIN", "laserperipheralspin": "NoPin", "laserperipheralsstatuspin": "NoPin", "cncrouterpin": "NoPin", "powerconsumptionpin": "NoPin", "doorpin": "NoPin", "powercheckpin": "NoPin", "caselightpin": "NoPin", "rgbledRpin": "NoPin", "rgbledGpin": "NoPin", "rgbledBpin": "NoPin", "rgbledWpin": "NoPin", "neopixelpin": "NoPin", "dhtdatapin": "NoPin", "tacho0pin": "NoPin", "tacho1pin": "NoPin", "tacho2pin": "NoPin", "tacho3pin": "NoPin", "tacho4pin": "NoPin", "tacho5pin": "NoPin", "END_DATA": 0 } ========== End configuration string ========== */

/**

MK4duo Firmware for 3D Printer, Laser and CNC
Based on Marlin, Sprinter and grbl
Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
Copyright (c) 2019 Alberto Cotronei @MagoKimbra
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see http://www.gnu.org/licenses/.
*/

pragma once

/**

Configuration_Pins.h
This configuration file contains all Pins.
*/

//=================================== BASIC ==================================

// X axis pins

define X_STEP_PIN ORIG_X_STEP_PIN

define X_DIR_PIN ORIG_X_DIR_PIN

define X_ENABLE_PIN ORIG_X_ENABLE_PIN

define X_CS_PIN ORIG_X_CS_PIN

// X2 axis pins

if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_TWO_STEPPER_DRIVERS)

define X2_STEP_PIN ORIG_E1_STEP_PIN

define X2_DIR_PIN ORIG_E1_DIR_PIN

define X2_ENABLE_PIN ORIG_E1_ENABLE_PIN

define X2_CS_PIN ORIG_E1_CS_PIN

endif

// Y axis pins

define Y_STEP_PIN ORIG_Y_STEP_PIN

define Y_DIR_PIN ORIG_Y_DIR_PIN

define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN

define Y_CS_PIN ORIG_Y_CS_PIN

// Y2 axis pins

if ENABLED(Y_TWO_STEPPER_DRIVERS)

define Y2_STEP_PIN ORIG_E1_STEP_PIN

define Y2_DIR_PIN ORIG_E1_DIR_PIN

define Y2_ENABLE_PIN ORIG_E1_ENABLE_PIN

define Y2_CS_PIN ORIG_E1_CS_PIN

endif

// Z axis pins

define Z_STEP_PIN ORIG_Z_STEP_PIN

define Z_DIR_PIN ORIG_Z_DIR_PIN

define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN

define Z_CS_PIN ORIG_Z_CS_PIN

// Z2 axis pins

if (ENABLED(Z_TWO_STEPPER_DRIVERS) || ENABLED(Z_THREE_STEPPER_DRIVERS))

define Z2_STEP_PIN ORIG_E1_STEP_PIN

define Z2_DIR_PIN ORIG_E1_DIR_PIN

define Z2_ENABLE_PIN ORIG_E1_ENABLE_PIN

define Z2_CS_PIN ORIG_E1_CS_PIN

endif

// Z3 axis pins

if ENABLED(Z_THREE_STEPPER_DRIVERS)

define Z3_STEP_PIN ORIG_E2_STEP_PIN

define Z3_DIR_PIN ORIG_E2_DIR_PIN

define Z3_ENABLE_PIN ORIG_E2_ENABLE_PIN

define Z3_CS_PIN ORIG_E2_CS_PIN

endif

// E0 axis pins

define E0_STEP_PIN ORIG_E0_STEP_PIN

define E0_DIR_PIN ORIG_E0_DIR_PIN

define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN

define E0_CS_PIN ORIG_E0_CS_PIN

define SOL0_PIN ORIG_SOL0_PIN

// E1 axis pins

define E1_STEP_PIN ORIG_E1_STEP_PIN

define E1_DIR_PIN ORIG_E1_DIR_PIN

define E1_ENABLE_PIN ORIG_E1_ENABLE_PIN

define E1_CS_PIN ORIG_E1_CS_PIN

define SOL1_PIN ORIG_SOL1_PIN

// E2 axis pins

define E2_STEP_PIN ORIG_E2_STEP_PIN

define E2_DIR_PIN ORIG_E2_DIR_PIN

define E2_ENABLE_PIN ORIG_E2_ENABLE_PIN

define E2_CS_PIN ORIG_E2_CS_PIN

define SOL2_PIN ORIG_SOL2_PIN

// E3 axis pins

define E3_STEP_PIN ORIG_E3_STEP_PIN

define E3_DIR_PIN ORIG_E3_DIR_PIN

define E3_ENABLE_PIN ORIG_E3_ENABLE_PIN

define E3_CS_PIN ORIG_E3_CS_PIN

define SOL3_PIN ORIG_SOL3_PIN

// E4 axis pins

define E4_STEP_PIN ORIG_E4_STEP_PIN

define E4_DIR_PIN ORIG_E4_DIR_PIN

define E4_ENABLE_PIN ORIG_E4_ENABLE_PIN

define E4_CS_PIN ORIG_E4_CS_PIN

define SOL4_PIN ORIG_SOL4_PIN

// E5 axis pins

define E5_STEP_PIN ORIG_E5_STEP_PIN

define E5_DIR_PIN ORIG_E5_DIR_PIN

define E5_ENABLE_PIN ORIG_E5_ENABLE_PIN

define E5_CS_PIN ORIG_E5_CS_PIN

define SOL5_PIN ORIG_SOL5_PIN

// ENDSTOP pins

define X_MIN_PIN ORIG_X_MIN_PIN

define X_MAX_PIN ORIG_X_MAX_PIN

define Y_MIN_PIN ORIG_Y_MIN_PIN

define Y_MAX_PIN ORIG_Y_MAX_PIN

define Z_MIN_PIN ORIG_Z_MIN_PIN

define Z_MAX_PIN ORIG_Z_MAX_PIN

define X2_MIN_PIN NoPin

define Y2_MIN_PIN NoPin

define Z2_MIN_PIN NoPin

define Z3_MIN_PIN NoPin

define X2_MAX_PIN NoPin

define Y2_MAX_PIN NoPin

define Z2_MAX_PIN NoPin

define Z3_MAX_PIN NoPin

define Z_PROBE_PIN NoPin

// HEATERS pins

define HEATER_HE0_PIN ORIG_HEATER_HE0_PIN

define HEATER_HE1_PIN ORIG_HEATER_HE1_PIN

define HEATER_HE2_PIN ORIG_HEATER_HE2_PIN

define HEATER_HE3_PIN ORIG_HEATER_HE3_PIN

define HEATER_HE4_PIN ORIG_HEATER_HE4_PIN

define HEATER_HE5_PIN ORIG_HEATER_HE5_PIN

define HEATER_BED0_PIN ORIG_HEATER_BED0_PIN

define HEATER_BED1_PIN ORIG_HEATER_BED1_PIN

define HEATER_BED2_PIN ORIG_HEATER_BED2_PIN

define HEATER_BED3_PIN ORIG_HEATER_BED3_PIN

define HEATER_CHAMBER0_PIN NoPin

define HEATER_CHAMBER1_PIN NoPin

define HEATER_CHAMBER2_PIN NoPin

define HEATER_CHAMBER3_PIN NoPin

define HEATER_COOLER_PIN NoPin

// TEMP pins

define TEMP_HE0_PIN ORIG_TEMP_HE0_PIN

define TEMP_HE1_PIN ORIG_TEMP_HE1_PIN

define TEMP_HE2_PIN ORIG_TEMP_HE2_PIN

define TEMP_HE3_PIN ORIG_TEMP_HE3_PIN

define TEMP_HE4_PIN ORIG_TEMP_HE4_PIN

define TEMP_HE5_PIN ORIG_TEMP_HE5_PIN

define TEMP_BED0_PIN ORIG_TEMP_BED0_PIN

define TEMP_BED1_PIN ORIG_TEMP_BED1_PIN

define TEMP_BED2_PIN ORIG_TEMP_BED2_PIN

define TEMP_BED3_PIN ORIG_TEMP_BED3_PIN

define TEMP_CHAMBER0_PIN NoPin

define TEMP_CHAMBER1_PIN NoPin

define TEMP_CHAMBER2_PIN NoPin

define TEMP_CHAMBER3_PIN NoPin

define TEMP_COOLER_PIN NoPin

// FAN pins

define FAN0_PIN ORIG_FAN0_PIN

define FAN1_PIN ORIG_FAN1_PIN

define FAN2_PIN ORIG_FAN2_PIN

define FAN3_PIN ORIG_FAN3_PIN

define FAN4_PIN ORIG_FAN4_PIN

define FAN5_PIN ORIG_FAN5_PIN

// PS ON pin

define PS_ON_PIN ORIG_PS_ON_PIN

// BEEPER pin

define BEEPER_PIN ORIG_BEEPER_PIN

//============================================================================

//================================= FEATURE ==================================

if ENABLED(TACHOMETRIC)

define TACHO0_PIN NoPin

define TACHO1_PIN NoPin

define TACHO2_PIN NoPin

define TACHO3_PIN NoPin

define TACHO4_PIN NoPin

define TACHO5_PIN NoPin

endif

if ENABLED(MKR4)

define E0E1_CHOICE_PIN -1

define E0E2_CHOICE_PIN -1

define E1E3_CHOICE_PIN -1

elif ENABLED(MKR6) || ENABLED(MKR12)

define EX1_CHOICE_PIN -1

define EX2_CHOICE_PIN -1

endif

if ENABLED(PRUSA_MMU2)

define MMU2_RST_PIN -1

endif

if ENABLED(LASER)

define LASER_PWR_PIN ORIG_LASER_PWR_PIN

define LASER_PWM_PIN ORIG_LASER_PWM_PIN

if ENABLED(LASER_PERIPHERALS)

#define LASER_PERIPHERALS_PIN         NoPin
#define LASER_PERIPHERALS_STATUS_PIN  NoPin

MKFirmware / MK4duo

MK4Duo 4.4.0 REPRAPWORLD_GRAPHICAL_LCD Menu Items Truncated #759

Issue description

Firmware version

define CONFIGURATION_OVERALL

define SERIAL_PORT_1 0

define BAUDRATE_1 250000

define SERIAL_PORT_2 -2

define BAUDRATE_2 250000

define BLOCK_BUFFER_SIZE 32

define MAX_CMD_SIZE 96

define BUFSIZE 8

define TX_BUFFER_SIZE 32

define RX_BUFFER_SIZE 1024

define SERIAL_XON_XOFF

define STRING_CONFIG_AUTHOR "(none, default config)"

define MACHINE_UUID "00000000-0000-0000-0000-000000000000"

define KILL_METHOD 0

define NO_TIMEOUTS 1000

define FASTER_GCODE_PARSER

define FASTER_GCODE_EXECUTE

define HOST_KEEPALIVE_FEATURE

define DEFAULT_KEEPALIVE_INTERVAL 2

define MOTHERBOARD BOARD_ULTRATRONICS

define MECHANISM MECH_CARTESIAN

define POWER_SUPPLY 0

define PS_DEFAULT_OFF false

define DELAY_AFTER_POWER_ON 5

define POWER_TIMEOUT 30

define EXTRUDERS 2

define DRIVER_EXTRUDERS 2

define TEMP_SENSOR_HE0 1

define TEMP_SENSOR_HE1 1

define TEMP_SENSOR_HE2 0

define TEMP_SENSOR_HE3 0

define TEMP_SENSOR_HE4 0

define TEMP_SENSOR_HE5 0

define TEMP_SENSOR_BED0 0

define TEMP_SENSOR_BED1 0

define TEMP_SENSOR_BED2 0

define TEMP_SENSOR_BED3 0

define TEMP_SENSOR_CHAMBER0 0

define TEMP_SENSOR_CHAMBER1 0

define TEMP_SENSOR_CHAMBER2 0

define TEMP_SENSOR_CHAMBER3 0

define TEMP_SENSOR_COOLER 0

define THERMISTOR_SERIES_RS 4700

define T9_NAME "User sensor"

define T9_R25 100000

define T9_BETA 4036

define DHT_TYPE 11

define TEMP_SENSOR_AD595_OFFSET 0

define TEMP_SENSOR_AD595_GAIN 1

define DUMMY_THERMISTOR_998_VALUE 25

define DUMMY_THERMISTOR_999_VALUE 100

define TEMP_RESIDENCY_TIME 10 // (seconds)

define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.

define HOTEND_0_MAXTEMP 275

define HOTEND_1_MAXTEMP 275

define HOTEND_2_MAXTEMP 275

define HOTEND_3_MAXTEMP 275

define HOTEND_4_MAXTEMP 275

define HOTEND_5_MAXTEMP 275

define BED_MAXTEMP 150

define CHAMBER_MAXTEMP 150

define COOLER_MAXTEMP 150

define HOTEND_0_MINTEMP 5

define HOTEND_1_MINTEMP 5

define HOTEND_2_MINTEMP 5

define HOTEND_3_MINTEMP 5

define HOTEND_4_MINTEMP 5

define HOTEND_5_MINTEMP 5

define BED_MINTEMP 5

define CHAMBER_MINTEMP 5

define COOLER_MINTEMP 5

define MAX_CONSECUTIVE_LOW_TEMP 2

define PREHEAT_1_LABEL "PLA"

define PREHEAT_1_TEMP_HOTEND 190

define PREHEAT_1_TEMP_BED 60

define PREHEAT_1_TEMP_CHAMBER 0