I have a weird problem : when selecting a file in the SD card menu, the bed heats, then the hotend starts to heat and suddenly it stops and Nextion displays "ATTENTION... NEXTION FW changed please upload new FW Click to continue".
No way to launch a print since all the firmwares including the SdFat library by Bill Greiman are installed in my MKS gen 1.4. Before the 20.02.2020 firmware, After both bed and hotend heating, home all axis are well performed but when starting to probe, the bed "forgot" to move down and the BLtouch pin hit the bed before being fully deployed.
So I'm wandering if all these new firmwares are still compatible with my MKS Gen 1.4. I'm surprised to be the only one having this issue.
Hi there,
I have a weird problem : when selecting a file in the SD card menu, the bed heats, then the hotend starts to heat and suddenly it stops and Nextion displays "ATTENTION... NEXTION FW changed please upload new FW Click to continue".
No way to launch a print since all the firmwares including the SdFat library by Bill Greiman are installed in my MKS gen 1.4. Before the 20.02.2020 firmware, After both bed and hotend heating, home all axis are well performed but when starting to probe, the bed "forgot" to move down and the BLtouch pin hit the bed before being fully deployed.
So I'm wandering if all these new firmwares are still compatible with my MKS Gen 1.4. I'm surprised to be the only one having this issue.
Thank you in advance for your reply
Configuration_Overall.txt Configuration_Pins.txt