Open WI-MetalManiac opened 3 years ago
Not sure if it's the answer but the Modern Driver Install needs to be between the Apply Network Settings and Setup Windows and ConfigMgr. On your case, it is after Setup Windows and ConfigMgr.
I recommend you to create a new TS with the basic things and do some tests.
And did you added the 2 required variables ?
Thank you! Nobody did answer. I totally missed that.
Thanks Mike Snow Network Administrator | Great Northern Corporation Office: (715) 738-1360 |Email: msnow@greatnortherncorp.commailto:msnow@greatnortherncorp.com
From: Wavee7 notifications@github.com Date: Tuesday, February 23, 2021 at 2:48 PM To: MSEndpointMgr/ModernDriverManagement ModernDriverManagement@noreply.github.com Cc: Snow, Mike MSnow@greatnortherncorp.com, Author author@noreply.github.com Subject: Re: [MSEndpointMgr/ModernDriverManagement] BareMetal install Error (#73)
Not sure if it's the answer but the Modern Driver Install needs to be between the Apply Network Settings and Setup Windows and ConfigMgr. On your case, it is after Setup Windows and ConfigMgr.
I recommend you to create a new TS with the basic things and do some tests.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/MSEndpointMgr/ModernDriverManagement/issues/73#issuecomment-784500866, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ASXKID4HCMW72MGOVHMHT7TTAQH7RANCNFSM4XDDSOLA.
I am getting the following error when running my TS. I just updated to the latest and greatest after being away for a bit.
Here is my parameter line: -BareMetal -EndPoint "sccm01.xxx.xxx " -TargetOSVersion "1803"