Issues on UX463F

[piposa]

On my Asus UX463F (i7 Comet Lake) some things are not working, beside what is already mentioned:

• Trackpad after sleep (needs reboot to work again)
• Trackpad right click and double click
• Bluetooth not shown as available hardware (anything special to do after OC install?)
• Keyboard backlight (I found a ACPI patch which made it working)
• external HDMI,
• I also have a Touchpad screen (Screenpad) which seems also not supported

Are these know issues? Or just specific for my install? I am using a MacBookPro 16,1 SMBBIOS could that create any of these issues?

[MSzturc]

Hi piposa,

i tried to reproduce most of your issues and i was not able to:

• Trackpad (Screenpad) is working after sleep. An issue that occured on my system was that the Touchscreen ( of the big display ) stopped working 2/10 times after sleep.
• Trackpad right click is not working because it's an gesture which ins not supported for gdx1515 in voodooi2c right now. As workaround i would suggest to bind right click on the bottom right side of trackpad.
• Bluetooth is working with the right USBMap.kext it might be that your hardware is not compatible to the map i provided. Please use USBMapAll or create a specific map for your device.
• Feel free to provide me an PR for the keyboard backlight ACPI Patch
• Im not sure what is external HDMI. The normal HDMI Port is working with 15.2 SMBIOS and the provided config. I was not able to get it running with 16.1.
• The touchscreen is disable by HDMI Mapping, it's working but since there is no software that is able to switch between mouse mode and touch mode ive disabled it.

[piposa]

Hi, thanks for the fast reply.

• I switched to SMBIOS 15,2 and HDMI Port is working. Tried around, also 16,2 is working, 16,4 not. I stayed with 16,2 for now as this seems to best match my CPU (i7-10510U). So all test are done with that for now. I also updated OpenCore to latest devel build, just FYI. I didn't see any difference so far to your build.
• Do you have a Screenpad (a monitor build into the touchpad) and got it working as well? Mine is not working so far.
• My touchpad is never working after sleep, whereas my touchscreen is always working, strange.
• Could you explain how to bind right click to bottom right side of touchpad? I don't know how that works.
• For bluetooth I tried USBInjectAll.kext, no change. I did not find USBMapAll. Do I need to create it myself?
• What do you mean by touchscreen disabled? I can at least move the pointer and touch (left) click and do 2 finger vertical scrolling.
• I am not very used to github, so PR will take some time. If you are interested, I downloaded SSDT-AsusSMC.aml from the last EFI.zip from here https://www.hackintosh-forum.de/forum/thread/46953-asus-zenbook-ux433fa-catalina-diverse-probleme/?pageNo=4 and replaced your SSDT-FNKEY.aml with it. Keyboard backlight is now working and you can change it with F6 and F7. Fn-F6 disables/enables Touchpad. (I am using karabiner -elements for the mapping)

[MSzturc]

Hi,

yes i have a Screenpad (it was working, but i've disabled it in the current configuration).

You can configure right click in System Settings -> Trackpad -> Cursor -> Secondary Click

Bluetooth was very tricky on this Laptop. I would suggest that you use Hackintool to Map all USB ports with an USB 2.0 / USB 3.0 / USB 3.1 and USB Type - C Usb Stick each.

Sorry for the confusion, i mean Screenpad, not Touchscreen.

[piposa]

Could you please tell me how to enable the Screenpad again? I didn't find where you disabled it.

I already tried with Hackintool to map all ports. No change, will keep trying. In this context: Airportitlwm.kext is very unstable for me, keeps loosing Wifi connection quite often. Do you have the same issue? I did switch to itlwm.kext and Heliport. Much more stable. But bluetooth is not working in both configurations.

[MSzturc]

Have a look at the HDMI Connector Settings inside Hackintool:

I cant remember the Settings i've used to activate the Screenpad but i would guess it was Index 1 Connector Type 0x02 Pipe 9 and Type HDMI. (Im not sure which flags i've used)

Airportitlwm is unstable true. For me it's no Problem since i use only one wlan. I my experiance it gets unstable changing wlans

[piposa]

I already did look into Hackintool and was playing around a lot with the values. I once had Screenpad on, but display nok. I tried your suggestion also with other busID etc. One observation: With your config.plist I am getting different flags and Type for index 0 and 2 already, not sure why:

Would be really great if you could dig up an old config.plist which was working on your side. Looks like connector patching is beyond my skills :-(

For Bluetooth still no success also. Similar with your config and my own created USBMap.kext. How does it look on your hackingtool? Maybe comparing with your view gives me a hint.... Thanks a lot!

[MSzturc]

Here are my USB Ports i've configured:

[piposa]

Thanks, that helped me to get Bluetooth finally working! Any chance you still have a config.plist which includes a working Screenpad monitor? So far my tries are not successful. I hope I could use it similar to linux: 2nd monitor and still as trackpad (not touchscreen).

[sqlsec]

Any chance you still have a config.plist which includes a working Screenpad monitor? So far my tries are not successful. I hope I could use it similar to linux: 2nd monitor and still as trackpad (not touchscreen).