search

Macrobase-tech / MKS-DLC32

MKS DLC32 is 32bit MCU powerful controller for CNC machine.
https://www.aliexpress.com/item/4000828878233.html?spm=a2g0o.store_pc_topSellerIng.8148356.7.6ab922a9BYVuPh
41 stars 21 forks source link

The problem is for the CNC firmware #36

Open Sim-26356 opened 11 months ago

Sim-26356 commented 11 months ago

Hello. The problem is for the CNC firmware . When using the HARD HOME function, only the X and Y axes are homing, the Z axis does not work. When using the GrblControl program, the machine coordinates of the Z axis are not determined. This prevents the MKS DLC-32 board from being used as a CNC machine. The machine is used in a normal configuration (not CoreXY). We really need a CNC machine. Please help with the firmware. We used the firmware MCS DLC32+TS35

Macrobase-tech commented 11 months ago

try CNC corexy firmware

------------------ Original ------------------ From: "Macrobase-tech/MKS-DLC32" @.>; Date: Sun, Nov 12, 2023 02:02 AM @.>; @.***>; Subject: [Macrobase-tech/MKS-DLC32] The problem is for the CNC firmware (Issue #36)

Hello. The problem is for the CNC firmware . When using the HARD HOME function, only the X and Y axes are homing, the Z axis does not work. When using the GrblControl program, the machine coordinates of the Z axis are not determined. This prevents the MKS DLC-32 board from being used as a CNC machine. The machine is used in a normal configuration (not CoreXY). We really need a CNC machine. Please help with the firmware. We used the firmware MCS DLC32+TS35

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: @.***>

Sim-26356 commented 11 months ago

We checked all four firmware versions from the MKS DLC32+TS35 folder, all equally did not help. The limit switch of the Z axis is in good condition, the firmware reacts with a rigid restriction when pressed. Posted here https://github.com/Macrobase-tech/MKS-DLC32/blob/main/DLC32-Firmware%20Code the firmware source code for the CoreXY machine, can you provide a version of the source code for the Normal machine?

Macrobase-tech commented 11 months ago

I sent you private mail

1005918473 @.***

 

------------------ Original ------------------ From: "Macrobase-tech/MKS-DLC32" @.>; Date: Mon, Nov 13, 2023 10:06 PM @.>; @.**@.>; Subject: Re: [Macrobase-tech/MKS-DLC32] The problem is for the CNC firmware (Issue #36)

We checked all four firmware versions from the MKS DLC32+TS35 folder, all equally did not help. The limit switch of the Z axis is in good condition, the firmware reacts with a rigid restriction when pressed. Posted here https://github.com/Macrobase-tech/MKS-DLC32/blob/main/DLC32-Firmware%20Code .zip the firmware source code for the CoreXY machine, can you provide a version of the source code for the Normal machine?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>

Sim-26356 commented 11 months ago

thank you

Daget84 commented 11 months ago

I have the same problem. help me solve please