search

Macrobase-tech / MKS-DLC32

MKS DLC32 is 32bit MCU powerful controller for CNC machine.
https://www.aliexpress.com/item/4000828878233.html?spm=a2g0o.store_pc_topSellerIng.8148356.7.6ab922a9BYVuPh
42 stars 21 forks source link

Air assist (M8,M9) #4

Open ruslanbanah opened 2 years ago

ruslanbanah commented 2 years ago

Hi folks. I assembled a laser cnc based on this motherboard. everything works great! But I needed air assistance… could you help with that? which pin is controlled by GRBL commands M8 and M9

Macrobase-tech commented 2 years ago

here is M8 control on cnc.

Best Regard!

 

------------------ 原始邮件 ------------------ 发件人: "Macrobase-tech/MKS-DLC32" @.>; 发送时间: 2022年2月9日(星期三) 凌晨4:05 @.>; @.***>; 主题: [Macrobase-tech/MKS-DLC32] Air assist (M8,M9) (Issue #4)

Hi folks. I assembled a laser cnc based on this motherboard. everything works great! But I needed air assistance… could you help with that? which pin is controlled by GRBL commands M8 and M9

— Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android. You are receiving this because you are subscribed to this thread.Message ID: @.***>

ruslanbanah commented 2 years ago

@Macrobase-tech Sorry, but I don't see any attachments. Pls send me to email: ruslanbanah@gmail.com

guilobo commented 2 years ago

can you send to me as too? gui.wolflobo@gmail.com

Macrobase-tech commented 2 years ago

hello,what file I should send?

------------------ 原始邮件 ------------------ 发件人: "Macrobase-tech/MKS-DLC32" @.>; 发送时间: 2022年9月8日(星期四) 凌晨3:53 @.>; @.**@.>; 主题: Re: [Macrobase-tech/MKS-DLC32] Air assist (M8,M9) (Issue #4)

can you send to me as too? @.***

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>

bobbyalata commented 1 year ago

could you please explain how the release of M7 and M8 is done? where should i connect the air assistant to MKS-DLC32

AndreyChervyakov commented 1 year ago

Air Assist. In manual I find "SCL pin can be used as a cooler function", it's I2C interface on plate. It's a 3.3V signal i think, but maybe 5V. In LigthBurn software you can choose M7 or M8 in device setting. From Youtube one man from channel plottmania.de show some thinks. Connection via MOSFET to I2C of board. I hope it work so.

Macrobase-tech commented 1 year ago

Right. 3.3v pin is to controls the air assist. Used as a control signal, not for load.

1005918473 @.***

 

------------------ Original ------------------ From: "Macrobase-tech/MKS-DLC32" @.>; Date: Wed, Feb 8, 2023 08:18 PM @.>; @.**@.>; Subject: Re: [Macrobase-tech/MKS-DLC32] Air assist (M8,M9) (Issue #4)

Air Assist. In manual I find "SCL pin can be used as a cooler function", it's I2C interface on plate. It's a 3.3V signal i think, but maybe 5V. In LigthBurn software you can choose M7 or M8 in device setting. From Youtube one man from channel plottmania.de show some thinks. Connection via MOSFET to I2C of board. I hope it work so.

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>