search

Made4RC / HoTTClient

Arduino library to read telemetry data from Graupner HoTT-sensors
7 stars 1 forks source link

Problem with mgm esc #1

Open jeanbatfr opened 3 years ago

jeanbatfr commented 3 years ago

Hi I tried to use your example code with an arduino nano and a mgm esc that can send Hott telemetry signal.

The MGM manual said to not connect the red wire so this is the only wire of your picture I don't connect.

Do you know if it should work or if there is something I can fix?

Thank you

Made4RC commented 3 years ago

Hello,

Two wires (ground and signal) were enough for devices that were externally powered like your ESC. A GPS or vario would require the red one as well.

Some users on Jetiforum (https://www.jetiforum.de/index.php/do-it-yourself/7627-hott-telmetriesensor-auf-jeti?start=0 https://www.jetiforum.de/index.php/do-it-yourself/7627-hott-telmetriesensor-auf-jeti?start=0) reported issues with the current code. Maybe some older versions works better.

Am 23.04.2021 um 16:54 schrieb jeanbatfr @.***>:

Hi I tried to use your example code with an arduino nano and a mgm esc that can send Hott telemetry signal.

The MGM manual said to not connect the red wire so this is the only wire of your picture I don't connect.

Do you know if it should work or if there is something I can fix?

Thank you

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Made4RC/HoTTClient/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/AECPJOIKOB6WSWUJUIBUZI3TKGC3FANCNFSM43OZQTHQ.

raquo commented 3 years ago

@jeanbatfr Hey did you manage to get telemetry from your MGM ESC with this library? Any issues with that?

jeanbatfr commented 3 years ago

I didn't tried anymore, I added external sensors and a pixhawk...

Le jeudi 16 septembre 2021, 11:19:32 UTC+2, Nikita Gazarov ***@***.***> a écrit :

@jeanbatfr Hey did you manage to get telemetry from your MGM ESC with this library? Any issues with that?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

Made4RC commented 3 years ago

I never tried such ESCs.

-- Norbert Kolb

Am 16.09.2021 um 12:40 schrieb jeanbatfr @.***>:

 I didn't tried anymore, I added external sensors and a pixhawk...

Le jeudi 16 septembre 2021, 11:19:32 UTC+2, Nikita Gazarov @.***> a écrit :

@jeanbatfr Hey did you manage to get telemetry from your MGM ESC with this library? Any issues with that?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android. — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.