Open akliouev opened 7 years ago
I wonder if there is any way to support the Mini 2? The USB vendor:device ID is 0x4745:0x2780, I managed to tweak and compile up3dcomm.c to try that device ID but up3dinfo gives me a partially valid output:
UP 3D PRINTER INFO: TypeID:2710 Serial:1 ROM:6.1300 Model:Please update your app U1:1.00 U3:1 U4:102 U7:100 Max-X:-120.000000 Max-Y:120.000000 Max-Z:130.000000 Steps/mm-X:214.000000 Steps/mm-Y:214.000000 Steps/mm-Z:214.000000 Steps--A: 10.000000 Print sets: 1 U2:0.00 U3:0.00 U10:0.00 U11:0.00 U12:0.00 U13:1.00 Set#0 Name:"Set 0" ND:0.00 LT:0.00 SW:0.00 ST:0.00 HW:0.00 HS:0.00 HL:0.00 XW:0.00 XS:0.00 XL:0.00 SV:0.00 HV:0.00 XV:0.00 JS:0.00 SZ:0.00 HZ:1.05 SZ:0.90 FZ:0.60 O1:20.00 O2:6.00 O3:1.00 O4:1500.00 O5:3000.00 O6:3000.00 U1:0.00 U2:0.00 U3:0.00 U4:0.00 U5:0.00 U6:0.00
Regards, Alex
I wonder if there is any way to support the Mini 2? The USB vendor:device ID is 0x4745:0x2780, I managed to tweak and compile up3dcomm.c to try that device ID but up3dinfo gives me a partially valid output:
UP 3D PRINTER INFO: TypeID:2710 Serial:1 ROM:6.1300 Model:Please update your app U1:1.00 U3:1 U4:102 U7:100 Max-X:-120.000000 Max-Y:120.000000 Max-Z:130.000000 Steps/mm-X:214.000000 Steps/mm-Y:214.000000 Steps/mm-Z:214.000000 Steps--A: 10.000000 Print sets: 1 U2:0.00 U3:0.00 U10:0.00 U11:0.00 U12:0.00 U13:1.00 Set#0 Name:"Set 0" ND:0.00 LT:0.00 SW:0.00 ST:0.00 HW:0.00 HS:0.00 HL:0.00 XW:0.00 XS:0.00 XL:0.00 SV:0.00 HV:0.00 XV:0.00 JS:0.00 SZ:0.00 HZ:1.05 SZ:0.90 FZ:0.60 O1:20.00 O2:6.00 O3:1.00 O4:1500.00 O5:3000.00 O6:3000.00 U1:0.00 U2:0.00 U3:0.00 U4:0.00 U5:0.00 U6:0.00
Regards, Alex