Error "undefined reference to `Arduino_ESP32RGBPanel::Arduino_ESP32RGBPanel'"

[malga6en]

My Code:

#include <Arduino_GFX_Library.h>
#include <TAMC_GT911.h>
#include <Wire.h>

#define SCREEN_HD
//#define SCREEN_NORMAL

#define I2C_SDA_PIN 17
#define I2C_SCL_PIN 18
#define TOUCH_INT -1
#define TOUCH_RST 38
#define TFT_BL 10

#ifdef SCREEN_HD
#define SCREEN_W 1024
#define SCREEN_H 600
#define TOUCH_ROTATION ROTATION_INVERTED
#endif

#ifdef SCREEN_NORMAL
#define SCREEN_W 800
#define SCREEN_H 480
#define TOUCH_ROTATION ROTATION_NORMAL
#endif

Arduino_ESP32RGBPanel *bus = new Arduino_ESP32RGBPanel(
    GFX_NOT_DEFINED /* CS */, GFX_NOT_DEFINED /* SCK */, GFX_NOT_DEFINED /* SDA */,
    40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
    45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
    5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
    8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */
);

Arduino_RPi_DPI_RGBPanel *gfx = new Arduino_RPi_DPI_RGBPanel(
    bus,
    SCREEN_W /* width */, 1 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 128 /* hsync_back_porch */,
    SCREEN_H /* height */, 1 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 45 /* vsync_back_porch */);

TAMC_GT911 ts = TAMC_GT911(I2C_SDA_PIN, I2C_SCL_PIN, TOUCH_INT, TOUCH_RST, 1024, 600);

int w = SCREEN_W;
int h = SCREEN_H;

int touch_last_x = 0;
int touch_last_y = 0;

void setup()
{

    Serial.begin(115200);
    Serial.println("ESP32S3 7inch LCD");

    pin_init();
    touch_init();

    // Init Display
    gfx->begin();

    gfx->fillScreen(WHITE);
    gfx->fillRect(0, 0, 50, 50, RED);
}

void loop()
{
    touch_read();
    gfx->fillRect(touch_last_x, touch_last_y, 10, 10, BLACK);
    delay(10);
}

//-------------------------------------------------------------------------

void pin_init()
{
    pinMode(TFT_BL, OUTPUT);
    pinMode(TOUCH_RST, OUTPUT);

    digitalWrite(TFT_BL, LOW);
    delay(100);
    digitalWrite(TOUCH_RST, LOW);
    delay(1000);
    digitalWrite(TOUCH_RST, HIGH);
    delay(1000);
    digitalWrite(TOUCH_RST, LOW);
    delay(1000);
    digitalWrite(TOUCH_RST, HIGH);
    delay(1000);
}

void touch_init(void)
{
    Wire.begin(I2C_SDA_PIN, I2C_SCL_PIN);
    ts.begin();
    ts.setRotation(TOUCH_ROTATION);
}

void touch_read()
{
    ts.read();
    if (ts.isTouched)
    {
#ifdef SCREEN_HD
        touch_last_x = map(ts.points[0].x, 0, 1024, 0, SCREEN_W);
        touch_last_y = map(ts.points[0].y, 0, 750, 0, SCREEN_H);

#endif
#ifdef SCREEN_NORMAL
        touch_last_x = map(ts.points[0].x, 1024, 200, 0, SCREEN_W);
        touch_last_y = map(ts.points[0].y, 600, 120, 0, SCREEN_H);

#endif

        Serial.print("TS x: ");
        Serial.print(ts.points[0].x);
        Serial.print("TS y: ");
        Serial.print(ts.points[0].y);

        Serial.print("Display x: ");
        Serial.print(touch_last_x);
        Serial.print("Display y: ");
        Serial.println(touch_last_y);

        ts.isTouched = false;
    }
}

ERROR:

C:\Temp\Coding\sketch_feb02a/sketch_feb02a.ino:32: undefined reference to `Arduino_ESP32RGBPanel::Arduino_ESP32RGBPanel(signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, signed char, bool)'

C:\Temp\Coding\sketch_feb02a/sketch_feb02a.ino:37: undefined reference to `Arduino_RPi_DPI_RGBPanel::Arduino_RPi_DPI_RGBPanel(Arduino_ESP32RGBPanel*, short, unsigned short, unsigned short, unsigned short, unsigned short, short, unsigned short, unsigned short, unsigned short, unsigned short, unsigned short, int, bool)' collect2.exe: error: ld returned 1 exit status

I can't compile the code! I installed exactly the same libs from the tutorial: https://wiki.makerfabs.com/MaTouch_ESP32_S3_7_Paralle_%20TFT_with_Touch.html

please Help ! 😥

[Fantonrko]

Use 1.3.1 Library