search

MamasBoyGitHub / universal-media-server

Automatically exported from code.google.com/p/universal-media-server
GNU General Public License v2.0
0 stars 0 forks source link

External subtitles does not work with Oppo bdp-105 #30

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1. Oppo bdp-105EU
2. Starting a movie on the Oppo 
3. mkv, avi or mp4 with external *.srt

What is the expected output? What do you see instead?
Movie starts but no external subs

What version of the product are you using? On what operating system?
UMS 2.1.2 on Windows 7 Ultimate 64 bit.

I tried newer version of UMS but had the same problems as reported in issue 26.

Please provide any additional information below.
It takes up to 5 minutes before UMS apears in Oppo but the Oppo apears in UMS 
instantly.
I have no problems viewing movies with internal subs.

Original issue reported on code.google.com by slanggu...@gmail.com on 29 Dec 2012 at 5:50

GoogleCodeExporter commented 8 years ago 
I have just tested version 2.2.5.
The problem with external subtitles are still there and it does still take 
about 5 minutes for UMS to apear in the Oppo.

One good thing, I had the same problem as described in issue 26 and that have 
been solved with this version. At least for me. Thanks for that.

Original comment by slanggu...@gmail.com on 16 Jan 2013 at 1:10

GoogleCodeExporter commented 8 years ago 
Thanks for the report. I'm testing this with someone and hope to have it fixed 
soon.

Original comment by subjunk on 19 Jan 2013 at 10:19

GoogleCodeExporter commented 8 years ago 
I have just tested version 2.2.6 and UMS now shows up in the Oppo realy fast. 
It only takes seconds. Thanks for that!

Subtitles does still not work.
I have also noticed when trying to run a movie with external subtitles I can 
not FastForward or use "GoTo".
Also, the Oppo can't detect the resolution. It will report 0 resolution or some 
jibberish.

Original comment by slanggu...@gmail.com on 22 Jan 2013 at 8:35

GoogleCodeExporter commented 8 years ago 
This is probably fixed in 2.4.0, please try that (will be released later today) 
and let me know

Original comment by subjunk on 9 Feb 2013 at 9:34

GoogleCodeExporter commented 8 years ago 
Hi,

I have now tested with version 2.4.0.
There are changes.

The Oppo does now recognize the movie’s time and resolution but when I start 
the film it does not show any subtitles, external or built in. If I remove the 
external subs file it will show the built in subs.

If I enter the “Transcode” folder, all files are recognized as mpg no 
matter what the files format actually are. Oppo will never recognize the 
movie’s time or resolution in the "Transcode Folder" no matter if I have 
external subs or not.

If I in the “Transcode” folder start the film with external subtitles it 
will work!
However, I cannot fast-forward or use “Go To”. I guess that’s because it 
did not recognize the time or resolution.

Original comment by slanggu...@gmail.com on 11 Feb 2013 at 11:07

Attachments:

GoogleCodeExporter commented 8 years ago 
Hi,

I have just installed version 2.51.
My problems with external subtitles are still the same.

The difference are that UMS thinks my "Oppo BDP 105" are a Netgear Neo TV.

If I try to enter an “Transcode” folder", when recognized as an Netgear Neo 
TV, I will get the message that to format is not supported.
If I the force UMS to use Oppo BDP-93 I can again start films with subtitles 
within “Transcode” folder" but, as before, no "fast forward" or "GoTo" 
functionality. 
And also as before, I will not get any external subtitles outside the 
“Transcode” folder" as shown in the attached picture "Movie external 
sub.jpg"

Original comment by slanggu...@gmail.com on 15 Mar 2013 at 1:00

GoogleCodeExporter commented 8 years ago 
Hi slanggurka :) Have you tried selecting "clean install" while you're 
installing UMS? I suspect that will fix this, please let me know

Original comment by subjunk on 15 Mar 2013 at 7:54

GoogleCodeExporter commented 8 years ago 
Hi,

yes, I did use "Clean Install".

Original comment by slanggu...@gmail.com on 15 Mar 2013 at 10:55

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
OK, can you please upload your debug info after trying to play the file? 
Instructions at 
http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=556

Original comment by subjunk on 15 Mar 2013 at 11:13

GoogleCodeExporter commented 8 years ago 
Hi,

Here is the debug info.
I have started 2 different films, to reproduce the bug, since they behave 
differently.
1. "Blade.1998.720p.BluRay.x264-CiNEFiLE.mkv" will start but without subtitles.
2. "The.Intouchables.2011.720p.Bluray.x264.anoXmous.mp4" will not start at all. 
It used to behave like "Blade" but not now.

Original comment by slanggu...@gmail.com on 16 Mar 2013 at 9:58

Attachments:

GoogleCodeExporter commented 8 years ago 
Hi,

I'm now running version 2.5.2.2

I found a solution for the problem playing mp4 as mentioned in my earlier post.
I made an renderer file "Oppo bdp105.conf" and now all problems with not be 
able to start mp4 are gone. To be honest I'm not sure what I did to make it 
work but by trial and error I came up with this file. Perhaps someone reading 
this have a better conf file, If so please post it.
I'm sure that a conf file for Oppo BDP 105 will work on 103 and vice versa.

However the problem with external subtitles are still the same.

Is there anyone out there having an Oppo BDP 105 or 103 with the same problems 
as I have?

Original comment by slanggu...@gmail.com on 23 Mar 2013 at 6:39

Attachments:

GoogleCodeExporter commented 8 years ago 
What happens if you remove line 15 from that file? (mediainfo=true)

Original comment by subjunk on 23 Mar 2013 at 10:19

GoogleCodeExporter commented 8 years ago 
If I remove "mediainfo=true" mp4 and avi files will appear as mpeg.
Also, I can not FastForward or use "GoTo" and the Oppo can't detect the 
resolution. It will report 0 resolution or some jibberish. Maybe that's why I 
can't use "Goto" and FastForward.

Original comment by slanggu...@gmail.com on 24 Mar 2013 at 10:10

GoogleCodeExporter commented 8 years ago 
I have been running 2.6.0 for some time and I have the same problem as before.
F.y.i. if I run movies with external subtitles on USB straight in to the Oppo, 
there are no problem.
I have tried varies settings in my "Oppo bdp105.conf" but I have not had any 
success getting external subtitles to work.
To bad, I would really like to try the new feature with "Live Subs".

Original comment by slanggu...@gmail.com on 15 Apr 2013 at 3:23

GoogleCodeExporter commented 8 years ago 
I have tried the new versions and are now running 2.6.3 and still have the 
problems with external subtitles. Is there anything I can test in the render 
file?

Original comment by slanggu...@gmail.com on 1 May 2013 at 3:21

GoogleCodeExporter commented 8 years ago 
I have tried the different beta versions and are now running 3.0.0-a5 and have 
the same problems with external subtitles as I did before.

Original comment by slanggu...@gmail.com on 12 Oct 2013 at 3:03

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
Maybe a stupid remark, but are you sure the .srt file has EXACTLY the same name 
as the movie file (with exception of the extension)? Otherwise the Oppo will 
not recognize the subtitle.

Original comment by biggetje...@gmail.com on 10 Nov 2013 at 8:19

GoogleCodeExporter commented 8 years ago 
Yes, the name are the same.

Original comment by slanggu...@gmail.com on 11 Nov 2013 at 7:30

GoogleCodeExporter commented 8 years ago 
We are switching over to GitHub for our issue tracking.
Future updates to this issue will be at the following link:
https://github.com/UniversalMediaServer/UniversalMediaServer/issues/162

Original comment by subjunk on 26 Nov 2013 at 3:45