I ran the network scan, selected a valid network, entered the correct password, chose advanced config, and entered valid information. This was accepted and a connection was established. I chose Commit on the main menu, then quit. A prompt then came up stating the config was unsaved and would I like to save before quitting.
Connecting to ****NETWORK****
......
Connection Sucessful
Choose commit config for changes to persist reboot.
=============================
Current Network Details:
=============================
SSID: ****NETWORK****
IP Address: 192.168.1.123
MAC address: 77:5A:1B:7F:CF:5C
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS 1: 8.8.8.8
DNS 2: 0.0.0.0
=============================
================
MAIN MENU
================
1: Scan
2: Enter SSID
3: WPS Connect
4: Disconnect
5: Commit Config
6: Quit
> 5
Commiting config to EEPROM...
Complete. Changes will now persist through reboot.
================
MAIN MENU
================
1: Scan
2: Enter SSID
3: WPS Connect
4: Disconnect
5: Commit Config
6: Quit
> 6
Your current config is unsaved.
Save Before Quit? y/n>
I ran the network scan, selected a valid network, entered the correct password, chose advanced config, and entered valid information. This was accepted and a connection was established. I chose Commit on the main menu, then quit. A prompt then came up stating the config was unsaved and would I like to save before quitting.