Closed ajacocks closed 4 years ago
@ajacocks Nice! Very good catches there! Looks like a good old copy/paste error on the bolt lengths. Not sure how I never saw that in all my read throughs. Many thanks!
Wait.... @ajacocks why did you think the bolt lengths for the controller cover were wrong? Was building another one tonight and realized that 20mm was, in fact, correct. There's no way 30mm would fix there. Yes, the holes are very deep, but it's for 20mm. and you need those four 30mm bolts for the fan.
Adam,
The longer bolts interfered with the fitting of the cover, IIRC.
Unfortunately, my memory is foggy on the rest.
On Sat, Jan 18, 2020, 11:09 PM Adam Haile notifications@github.com wrote:
Wait.... @ajacocks https://github.com/ajacocks why did you think the bolt lengths for the controller cover were wrong? Was building another one tonight and realized that 20mm was, in fact, correct. There's no way 30mm would fix there. Yes, the holes are very deep, but it's for 20mm. and you need those four 30mm bolts for the fan.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AFLVO4VMWRFCN5CQHWFNHVTQ6PG7VA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJKIQHI#issuecomment-575965213, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFLVO4TB57EADI3S3S6MADTQ6PG7VANCNFSM4J3A7DQQ .
Well, what you changed it to was to the longer bolts. I've changed it back to 20mm. No worries. Just curious.
On Wed, Jan 22, 2020 at 11:08 AM J. Alexander Jacocks < notifications@github.com> wrote:
Adam,
The longer bolts interfered with the fitting of the cover, IIRC.
Unfortunately, my memory is foggy on the rest.
- Alex
On Sat, Jan 18, 2020, 11:09 PM Adam Haile notifications@github.com wrote:
Wait.... @ajacocks https://github.com/ajacocks why did you think the bolt lengths for the controller cover were wrong? Was building another one tonight and realized that 20mm was, in fact, correct. There's no way 30mm would fix there. Yes, the holes are very deep, but it's for 20mm. and you need those four 30mm bolts for the fan.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AFLVO4VMWRFCN5CQHWFNHVTQ6PG7VA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJKIQHI#issuecomment-575965213 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AFLVO4TB57EADI3S3S6MADTQ6PG7VANCNFSM4J3A7DQQ
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AAHJV2X4SPSGDZHIKTXTFODQ7BVORA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJUEQDI#issuecomment-577259533, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAHJV2TP2USX5P7MEFMTK53Q7BVORANCNFSM4J3A7DQQ .
With the 20s, on mine, the threads wouldn't engage.
That's why I changed it.
I dunno what the difference would be, though.
On Wed, Jan 22, 2020 at 1:42 PM Adam Haile notifications@github.com wrote:
Well, what you changed it to was to the longer bolts. I've changed it back to 20mm. No worries. Just curious.
On Wed, Jan 22, 2020 at 11:08 AM J. Alexander Jacocks < notifications@github.com> wrote:
Adam,
The longer bolts interfered with the fitting of the cover, IIRC.
Unfortunately, my memory is foggy on the rest.
- Alex
On Sat, Jan 18, 2020, 11:09 PM Adam Haile notifications@github.com wrote:
Wait.... @ajacocks https://github.com/ajacocks why did you think the bolt lengths for the controller cover were wrong? Was building another one tonight and realized that 20mm was, in fact, correct. There's no way 30mm would fix there. Yes, the holes are very deep, but it's for 20mm. and you need those four 30mm bolts for the fan.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AFLVO4TB57EADI3S3S6MADTQ6PG7VANCNFSM4J3A7DQQ
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub < https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AAHJV2X4SPSGDZHIKTXTFODQ7BVORA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJUEQDI#issuecomment-577259533 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAHJV2TP2USX5P7MEFMTK53Q7BVORANCNFSM4J3A7DQQ
.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AFLVO4WBURQDALFJGA7DGY3Q7CHRFA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJUVBNA#issuecomment-577327284, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFLVO4VADXVXAHIPKWSHDO3Q7CHRFANCNFSM4J3A7DQQ .
Alexander Jacocks, RHCE | Staff Solution Architect (e) alexander@redhat.com | Public Sector Business Development (c) (240) 447-5974 | Tyson's Corner, VA (g) CC28 8136 C253 907A B9BB 9EEA D3C8 1A3A 790A 0AB9
.... Remind me, did you print your own parts? The 30s should be too long by a lot. I checked the original design and it's definitely 20mm Plus if you used the 30s for the controller cover you wouldn't have the right length for the fan.
On Wed, Jan 22, 2020 at 4:11 PM J. Alexander Jacocks < notifications@github.com> wrote:
With the 20s, on mine, the threads wouldn't engage.
That's why I changed it.
I dunno what the difference would be, though.
- Alex
On Wed, Jan 22, 2020 at 1:42 PM Adam Haile notifications@github.com wrote:
Well, what you changed it to was to the longer bolts. I've changed it back to 20mm. No worries. Just curious.
On Wed, Jan 22, 2020 at 11:08 AM J. Alexander Jacocks < notifications@github.com> wrote:
Adam,
The longer bolts interfered with the fitting of the cover, IIRC.
Unfortunately, my memory is foggy on the rest.
- Alex
On Sat, Jan 18, 2020, 11:09 PM Adam Haile notifications@github.com wrote:
Wait.... @ajacocks https://github.com/ajacocks why did you think the bolt lengths for the controller cover were wrong? Was building another one tonight and realized that 20mm was, in fact, correct. There's no way 30mm would fix there. Yes, the holes are very deep, but it's for 20mm. and you need those four 30mm bolts for the fan.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AFLVO4TB57EADI3S3S6MADTQ6PG7VANCNFSM4J3A7DQQ
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AAHJV2TP2USX5P7MEFMTK53Q7BVORANCNFSM4J3A7DQQ
.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AFLVO4WBURQDALFJGA7DGY3Q7CHRFA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJUVBNA#issuecomment-577327284 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AFLVO4VADXVXAHIPKWSHDO3Q7CHRFANCNFSM4J3A7DQQ
.
--
Alexander Jacocks, RHCE | Staff Solution Architect (e) alexander@redhat.com | Public Sector Business Development (c) (240) 447-5974 | Tyson's Corner, VA (g) CC28 8136 C253 907A B9BB 9EEA D3C8 1A3A 790A 0AB9
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AAHJV2S7IGPDBROEVJ2TDEDQ7CY7DA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJVDWPQ#issuecomment-577387326, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAHJV2WFXP6YIG5BOJPWCX3Q7CY7DANCNFSM4J3A7DQQ .
I printed my own. Memories are definitely hazy, but I’ll pull one of the bolts out and confirm.
On Wed, Jan 22, 2020 at 16:14 Adam Haile notifications@github.com wrote:
.... Remind me, did you print your own parts? The 30s should be too long by a lot. I checked the original design and it's definitely 20mm Plus if you used the 30s for the controller cover you wouldn't have the right length for the fan.
On Wed, Jan 22, 2020 at 4:11 PM J. Alexander Jacocks < notifications@github.com> wrote:
With the 20s, on mine, the threads wouldn't engage.
That's why I changed it.
I dunno what the difference would be, though.
- Alex
On Wed, Jan 22, 2020 at 1:42 PM Adam Haile notifications@github.com wrote:
Well, what you changed it to was to the longer bolts. I've changed it back to 20mm. No worries. Just curious.
On Wed, Jan 22, 2020 at 11:08 AM J. Alexander Jacocks < notifications@github.com> wrote:
Adam,
The longer bolts interfered with the fitting of the cover, IIRC.
Unfortunately, my memory is foggy on the rest.
- Alex
On Sat, Jan 18, 2020, 11:09 PM Adam Haile notifications@github.com wrote:
Wait.... @ajacocks https://github.com/ajacocks why did you think the bolt lengths for the controller cover were wrong? Was building another one tonight and realized that 20mm was, in fact, correct. There's no way 30mm would fix there. Yes, the holes are very deep, but it's for 20mm. and you need those four 30mm bolts for the fan.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AFLVO4TB57EADI3S3S6MADTQ6PG7VANCNFSM4J3A7DQQ
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AAHJV2TP2USX5P7MEFMTK53Q7BVORANCNFSM4J3A7DQQ
.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AFLVO4VADXVXAHIPKWSHDO3Q7CHRFANCNFSM4J3A7DQQ
.
--
Alexander Jacocks, RHCE | Staff Solution Architect (e) alexander@redhat.com | Public Sector Business Development (c) (240) 447-5974 | Tyson's Corner, VA (g) CC28 8136 C253 907A B9BB 9EEA D3C8 1A3A 790A 0AB9
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub < https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AAHJV2S7IGPDBROEVJ2TDEDQ7CY7DA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJVDWPQ#issuecomment-577387326 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAHJV2WFXP6YIG5BOJPWCX3Q7CY7DANCNFSM4J3A7DQQ
.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/ManiacalLabs/Engravinator.com/pull/44?email_source=notifications&email_token=AFLVO4TSOBNTFJJVSHDD2ILQ7CZKDA5CNFSM4J3A7DQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEJVD7SQ#issuecomment-577388490, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFLVO4VQAE5RENH3UXV44PLQ7CZKDANCNFSM4J3A7DQQ .
--
Alexander Jacocks, RHCE | Staff Solution Architect (e) alexander@redhat.com | Public Sector Business Development (c) (240) 447-5974 | Tyson's Corner, VA (g) CC28 8136 C253 907A B9BB 9EEA D3C8 1A3A 790A 0AB9
Update sections 00 01 for grammar, and add fastener tightening diagram.